Re: [PATCH V10 1/4] perf/powerpc: assign an id to each powerpc register

From	Michael Ellerman <mpe@ellerman.id.au>
Newsgroups	linux.kernel
Subject	Re: [PATCH V10 1/4] perf/powerpc: assign an id to each powerpc register
Date	2016-01-20 11:40 +0100
Message-ID	<qSYlc-56e-5@gated-at.bofh.it> (permalink)
References	<qPHTA-Yo-7@gated-at.bofh.it> <qPHTA-Yo-15@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi Anju,

On Mon, 2016-01-11 at 15:58 +0530, Anju T wrote:

> The enum definition assigns an 'id' to each register in "struct pt_regs"
> of arch/powerpc. The order of these values in the enum definition are
> based on the corresponding macros in arch/powerpc/include/uapi/asm/ptrace.h.

Sorry one thing ...

> diff --git a/arch/powerpc/include/uapi/asm/perf_regs.h b/arch/powerpc/include/uapi/asm/perf_regs.h
> new file mode 100644
> index 0000000..cfbd068
> --- /dev/null
> +++ b/arch/powerpc/include/uapi/asm/perf_regs.h
> @@ -0,0 +1,49 @@
> +#ifndef _ASM_POWERPC_PERF_REGS_H
> +#define _ASM_POWERPC_PERF_REGS_H
> +
> +enum perf_event_powerpc_regs {
> +	PERF_REG_POWERPC_GPR0,
> +	PERF_REG_POWERPC_GPR1,
> +	PERF_REG_POWERPC_GPR2,
> +	PERF_REG_POWERPC_GPR3,
> +	PERF_REG_POWERPC_GPR4,
> +	PERF_REG_POWERPC_GPR5,
> +	PERF_REG_POWERPC_GPR6,
> +	PERF_REG_POWERPC_GPR7,
> +	PERF_REG_POWERPC_GPR8,
> +	PERF_REG_POWERPC_GPR9,
> +	PERF_REG_POWERPC_GPR10,
> +	PERF_REG_POWERPC_GPR11,
> +	PERF_REG_POWERPC_GPR12,
> +	PERF_REG_POWERPC_GPR13,
> +	PERF_REG_POWERPC_GPR14,
> +	PERF_REG_POWERPC_GPR15,
> +	PERF_REG_POWERPC_GPR16,
> +	PERF_REG_POWERPC_GPR17,
> +	PERF_REG_POWERPC_GPR18,
> +	PERF_REG_POWERPC_GPR19,
> +	PERF_REG_POWERPC_GPR20,
> +	PERF_REG_POWERPC_GPR21,
> +	PERF_REG_POWERPC_GPR22,
> +	PERF_REG_POWERPC_GPR23,
> +	PERF_REG_POWERPC_GPR24,
> +	PERF_REG_POWERPC_GPR25,
> +	PERF_REG_POWERPC_GPR26,
> +	PERF_REG_POWERPC_GPR27,
> +	PERF_REG_POWERPC_GPR28,
> +	PERF_REG_POWERPC_GPR29,
> +	PERF_REG_POWERPC_GPR30,
> +	PERF_REG_POWERPC_GPR31,
> +	PERF_REG_POWERPC_NIP,
> +	PERF_REG_POWERPC_MSR,
> +	PERF_REG_POWERPC_ORIG_R3,
> +	PERF_REG_POWERPC_CTR,
> +	PERF_REG_POWERPC_LNK,
> +	PERF_REG_POWERPC_XER,
> +	PERF_REG_POWERPC_CCR,

You skipped SOFTE here at my suggestion, because it's called MQ on 32-bit.

But I've changed my mind, I think we *should* define SOFTE, and ignore MQ,
because MQ is unused. So just add:

  +	PERF_REG_POWERPC_SOFTE,


> +	PERF_REG_POWERPC_TRAP,
> +	PERF_REG_POWERPC_DAR,
> +	PERF_REG_POWERPC_DSISR,
> +	PERF_REG_POWERPC_MAX,
> +};
> +#endif /* _ASM_POWERPC_PERF_REGS_H */

cheers

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH V10 1/4] perf/powerpc: assign an id to each powerpc  register Michael Ellerman <mpe@ellerman.id.au> - 2016-01-20 11:40 +0100
  Re: [PATCH V10 1/4] perf/powerpc: assign an id to each powerpc  register Anju T <anju@linux.vnet.ibm.com> - 2016-01-21 09:50 +0100

csiph-web