Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1312865
| From | Shawn Lin <shawn.lin@rock-chips.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v3] mmc: dw_mmc: add hw_reset support |
| Date | 2016-01-20 05:30 +0100 |
| Message-ID | <qSSz9-1f8-55@gated-at.bofh.it> (permalink) |
| References | <qQEJX-7Zf-3@gated-at.bofh.it> <qSSz9-1f8-57@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 2016/1/20 12:24, Jaehoon Chung wrote:
> Hi, Shawn.
>
> On 01/14/2016 10:08 AM, Shawn Lin wrote:
>> This patch implement hw_reset function for DesignWare
>> MMC controller. By adding this feature, mmc blk can
>> do some basic recovery.
>>
>> Set the following resets:
>> software reset – BMOD[0] for IDMAC only
>> DMA reset– CTRL[2]
>> FIFO reset – CTRL[1] bits
>>
>> Program the CARD_RESET register with a value of 0 for the bit
>> corresponding to the card number; This programming asserts the
>> RST_n signal and resets the card. After a minimum of 1 μs, de-asserts the
>> RST_n signal and takes the card out of reset. The application can program
>> a new CMD only after a minimum of 200 us
>>
>> This implementation can be easily tested by cutting off->On vmmc
>> while doing data accessing in background to simulate that case.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>
>> ---
>>
>> Changes in v3:
>> - reset for each slot
>> - simply the commit msg
>>
>> Changes in v2:
>> - remove unecessary mb
>> - reduce time cost for hw_reset
>> - combine SDMMC_CTRL_DMA_RESET and SDMMC_CTRL_FIFO_RESET
>>
>> drivers/mmc/host/dw_mmc.c | 29 +++++++++++++++++++++++++++++
>> drivers/mmc/host/dw_mmc.h | 3 +++
>> 2 files changed, 32 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 7128351..fddbcb6 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1477,6 +1477,34 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
>> return present;
>> }
>>
>> +static void dw_mci_hw_reset(struct mmc_host *mmc)
>> +{
>> + struct dw_mci_slot *slot = mmc_priv(mmc);
>> + struct dw_mci *host = slot->host;
>> + int reset;
>> +
>> + if (host->use_dma == TRANS_MODE_IDMAC)
>> + dw_mci_idmac_reset(host);
>> +
>> + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET |
>> + SDMMC_CTRL_FIFO_RESET))
>> + return;
>> +
>> + /*
>> + * According to eMMC spec, card reset procedure:
>> + * tRstW >= 1us: RST_n pulse width
>> + * tRSCA >= 200us: RST_n to Command time
>> + * tRSTH >= 1us: RST_n high period
>> + */
>> + reset = mci_readl(host, RST_N);
>> + reset &= ~(SDMMC_RST_HWACTIVE << slot->id);
>> + mci_writel(slot->host, RST_N, reset);
>
> I will pick this patch, after change "host" instead of "slot->host".
> (I will change it when i apply this.)
>
> Thanks!
Thanks, Jaehoon. :)
>
> Best Regards,
> Jaehoon Chung
>
>> + usleep_range(1, 2);
>> + reset |= SDMMC_RST_HWACTIVE << slot->id;
>> + mci_writel(slot->host, RST_N, reset);
>> + usleep_range(200, 300);
>> +}
>> +
>> static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
>> {
>> struct dw_mci_slot *slot = mmc_priv(mmc);
>> @@ -1563,6 +1591,7 @@ static const struct mmc_host_ops dw_mci_ops = {
>> .set_ios = dw_mci_set_ios,
>> .get_ro = dw_mci_get_ro,
>> .get_cd = dw_mci_get_cd,
>> + .hw_reset = dw_mci_hw_reset,
>> .enable_sdio_irq = dw_mci_enable_sdio_irq,
>> .execute_tuning = dw_mci_execute_tuning,
>> .card_busy = dw_mci_card_busy,
>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>> index f695b58..a14b7fc 100644
>> --- a/drivers/mmc/host/dw_mmc.h
>> +++ b/drivers/mmc/host/dw_mmc.h
>> @@ -46,6 +46,7 @@
>> #define SDMMC_VERID 0x06c
>> #define SDMMC_HCON 0x070
>> #define SDMMC_UHS_REG 0x074
>> +#define SDMMC_RST_N 0x078
>> #define SDMMC_BMOD 0x080
>> #define SDMMC_PLDMND 0x084
>> #define SDMMC_DBADDR 0x088
>> @@ -169,6 +170,8 @@
>> #define SDMMC_IDMAC_ENABLE BIT(7)
>> #define SDMMC_IDMAC_FB BIT(1)
>> #define SDMMC_IDMAC_SWRESET BIT(0)
>> +/* H/W reset */
>> +#define SDMMC_RST_HWACTIVE 0x1
>> /* Version ID register define */
>> #define SDMMC_GET_VERID(x) ((x) & 0xFFFF)
>> /* Card read threshold */
>>
>
>
>
>
--
Best Regards
Shawn Lin
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH v3] mmc: dw_mmc: add hw_reset support Shawn Lin <shawn.lin@rock-chips.com> - 2016-01-20 05:30 +0100
csiph-web