Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1312162
| From | Caesar Wang <caesar.upstream@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support |
| Date | 2016-01-19 12:50 +0100 |
| Message-ID | <qSCXn-7c3-5@gated-at.bofh.it> (permalink) |
| References | <qSBeX-5Y1-21@gated-at.bofh.it> <qSBoC-6hJ-11@gated-at.bofh.it> <qSCkH-6VX-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
在 2016年01月19日 19:07, Shawn Lin 写道: > On 2016/1/19 18:07, Heiko Stuebner wrote: >> Hi Shawn, >> >> Am Dienstag, 19. Januar 2016, 17:52:45 schrieb Shawn Lin: >>> We find rk3368 fail to enumerate sd card since >>> the default state is gpio function. Meahwhile, lots of >>> rockchip platform dts file assign pinctrl to dw_mmc but actually >>> dw_mmc never use it. Fortunately, those platforms' default io >>> state is sdmmc function, but no always right for all. >>> >>> Cc: Heiko Stuebner <heiko@sntech.de> >>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >> >> I do believe any issue you see, must come from somewhere else, >> because the >> driver-core does in drivers/base/dd.c really_probe(): >> pinctrl_bind_pins() > > yes, pinctrl_bind_pins does turn pinctrl state. But I try debug a little > more and seems somewhere else switch the state before dw_mmc probe. > Now I *guess* that may relate to our ATF or MCU firmware since > rk3368's sdmmc io can also be used as mcu_jtag for system debug. I > need to double check that point, thanks. > Yep, maybe that's related to the firmware setting. I guess you can repro this issue on RK3368 platform. At least until now, the RK3036, RK3288....that's work well. > Hi Caesar, > does your patch able to consider adding SDMMC/CPU_JTAG/MCU_JTAG > managment for rk3368 as well? > That's no related, I will add the sdmmc node and check it on tomorrow if the time can be availabled. >> which in turn already does the needed pinctrl state handling. >> >> So that default-state should be set up even before the dwmmc probe >> function >> is called. >> >> The sharing between sdmmc and uart2 pins is the same on the rk3036 >> and so >> far Caesar seems to have been able to switch the pin-state to sdmmc >> without >> touching the dw_mmc driver itself. >> Yep, that's working on rk3036 kylin board. --- Thanks, Caesar
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] mmc: dw_mmc-rockchip: add pinctrl support Shawn Lin <shawn.lin@rock-chips.com> - 2016-01-19 11:00 +0100
Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support Heiko Stuebner <heiko@sntech.de> - 2016-01-19 11:10 +0100
Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support Shawn Lin <shawn.lin@rock-chips.com> - 2016-01-19 12:10 +0100
Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support Caesar Wang <caesar.upstream@gmail.com> - 2016-01-19 12:50 +0100
Re: [PATCH] mmc: dw_mmc-rockchip: add pinctrl support Shawn Lin <shawn.lin@rock-chips.com> - 2016-01-20 02:00 +0100
csiph-web