Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1308650

Re: [PATCH 1/2] clk: tegra: Fix warning caused by pll_u failing to lock

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Mon, Dec 21, 2015 at 12:56:31PM +0000, Jon Hunter wrote:
> If the pll_u is not configured by the bootloader, then on kernel boot the
> following warning is seen:
> 
>  clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
>  tegra_init_from_table: Failed to enable pll_u_out1
>  ------------[ cut here ]------------
>  WARNING: at drivers/clk/tegra/clk.c:269
>  Modules linked in:
> 
>  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-next-20151214+ #1
>  Hardware name: NVIDIA Tegra210 P2371 reference board (E.1) (DT)
>  task: ffffffc0bc0a0000 ti: ffffffc0bc0a8000 task.ti: ffffffc0bc0a8000
>  PC is at tegra_init_from_table+0x140/0x164
>  LR is at tegra_init_from_table+0x140/0x164
>  pc : [<ffffffc0008fee78>] lr : [<ffffffc0008fee78>] pstate: 80000045
>  sp : ffffffc0bc0abd50
>  x29: ffffffc0bc0abd50 x28: ffffffc00090b8a8
>  x27: ffffffc000a06000 x26: ffffffc0bc019780
>  x25: ffffffc00086a708 x24: ffffffc00086a790
>  x23: ffffffc0006d7188 x22: ffffffc0bc010000
>  x21: 000000000000016e x20: ffffffc0bc00d100
>  x19: ffffffc000944178 x18: 0000000000000007
>  x17: 000000000000000e x16: 0000000000000001
>  x15: 0000000000000007 x14: 000000000000000e
>  x13: 0000000000000013 x12: 000000000000001a
>  x11: 000000000000004d x10: 0000000000000750
>  x9 : ffffffc0bc0a8000 x8 : ffffffc0bc0a07b0
>  x7 : 0000000000000001 x6 : 0000000002d5f0f8
>  x5 : 0000000000000000 x4 : 0000000000000000
>  x3 : 0000000000000002 x2 : ffffffc000996724
>  x1 : 0000000000000000 x0 : 0000000000000032
> 
>  ---[ end trace cbd20ae519e92ced ]---
>  Call trace:
>  [<ffffffc0008fee78>] tegra_init_from_table+0x140/0x164
>  [<ffffffc000900ac8>] tegra210_clock_apply_init_table+0x20/0x28
>  [<ffffffc0008fec40>] tegra_clocks_apply_init_table+0x18/0x24
>  [<ffffffc00008291c>] do_one_initcall+0x90/0x194
>  [<ffffffc0008cfab0>] kernel_init_freeable+0x148/0x1e8
>  [<ffffffc000636bb0>] kernel_init+0x10/0xdc
>  [<ffffffc000085cd0>] ret_from_fork+0x10/0x40
>  clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
>  tegra_init_from_table: Failed to enable pll_u_out2
>  ------------[ cut here ]------------
> 
> pll_u can be either controlled by software or hardware and this is
> selected via the OVERRIDE bit in the pll_u base register. In the function
> tegra210_pll_init(), the OVERRIDE bit for pll_u is cleared, which selects
> hardware control of the pll. However, at the same time the pll_u clocks
> are populated in the init_table for tegra210 and so software will try to
> configure the pll_u if it is not already configured and hence, the above
> warning is seen when the pll fails to lock. Remove the pll_u clocks from
> the init_table so that software does not try to configure this pll on
> boot.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 2 --
>  1 file changed, 2 deletions(-)

Applied, thanks.
Thierry

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 1/2] clk: tegra: Fix warning caused by pll_u failing to  lock Thierry Reding <thierry.reding@gmail.com> - 2016-01-13 18:20 +0100

csiph-web