Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1307798

Re: [PATCH 2/2] iio: light: opt3001: enable operation w/o IRQ

Show all headers | View raw

Am 12.01.2016 um 20:27 schrieb Peter Meerwald-Stadler:
> On Tue, 12 Jan 2016, Alexander Koch wrote:
> 
>> Enable operation of the TI OPT3001 light sensor without having an
>> interrupt line available to connect the INT pin to.
>>
>> In this operation mode, we issue a conversion request and simply wait
>> for the conversion time available as timeout value, determined from
>> integration time configuration and the worst-case time given in the data
>> sheet (sect. 6.5, table on p. 5):
>>
>>   short integration time (100ms): 110ms + 3ms = 113ms
>>    long integration time (800ms): 880ms + 3ms = 883ms
>>
>> This change is transparent as behaviour defaults to using the interrupt
>> method if an interrupt no. is configured via device tree. Interrupt-less
>> operation mode is performed when no valid interrupt no. is given.
> 
> looks good, I'd rather use a bool for use_irq and the msecs_to_jiffies() 
> call moved from the #define to the code (which is not strictly necessary 
> for the patch) -- matter of taste

Thanks - actually this is my first patch, so positive feedback much
appreciated!

Concerning the bool for 'use_irq': I first had it that way but then
opted for the bit field of length 1 as I wasn't sure whether bool would
get optimized to the same level by the compiler.

I'm a bit irritated by your comment concerning the msecs_to_jiffies()
call, as my patch indeed moves this call from the #define to the code.
Did you mean it the other way round, then?
My reason to move it was that I need to work with microseconds for the
IRQ-less operation mode, and jiffies are only required in one place for
the IRQ mode.


Best regards

lynix

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/2] iio: light: opt3001: Enable operation w/o IRQ Alexander Koch <mail@alexanderkoch.net> - 2016-01-12 19:20 +0100
  [PATCH 2/2] iio: light: opt3001: enable operation w/o IRQ Alexander Koch <mail@alexanderkoch.net> - 2016-01-12 19:20 +0100
    Re: [PATCH 2/2] iio: light: opt3001: enable operation w/o IRQ Peter Meerwald-Stadler <pmeerw@pmeerw.net> - 2016-01-12 20:30 +0100
      Re: [PATCH 2/2] iio: light: opt3001: enable operation w/o IRQ Alexander Koch <mail@alexanderkoch.net> - 2016-01-12 21:20 +0100
  [PATCH 1/2] iio: light: opt3001: extract int. time constants Alexander Koch <mail@alexanderkoch.net> - 2016-01-12 19:20 +0100

csiph-web