[PATCH 0/2] fix rk3066a-rayeager board hang when cpufreq changes

From	Andy Yan <andy.yan@rock-chips.com>
Newsgroups	linux.kernel
Subject	[PATCH 0/2] fix rk3066a-rayeager board hang when cpufreq changes
Date	2016-01-14 13:40 +0100
Message-ID	<qQPm2-71u-9@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

I found the rayeager board always hang in the system boot
process or when cpufreq change. When check the BSP code[0]
from ChipSpark, I found the current vdd_arm voltage is too
low and so is the vdd_logic voltage, which should be modulated
by PWM3.

So I increase the vdd_arm voltage and enabled pwm3 as a pwm
regulator here.

[0] https://github.com/RockchipOpensourceCommunity/px2-android-kernel-3.0/blob/master/arch/arm/mach-rkpx2/board-rkpx2-sdk.c


Andy Yan (2):
  ARM: dts: rockchip: increase vdd_arm voltage for rk3066a-rayeager
    board
  ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a-rayeager
    board

 arch/arm/boot/dts/rk3066a-rayeager.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

-- 
1.9.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/2] fix rk3066a-rayeager board hang when cpufreq changes Andy Yan <andy.yan@rock-chips.com> - 2016-01-14 13:40 +0100
  [PATCH 2/2] ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a-rayeager board Andy Yan <andy.yan@rock-chips.com> - 2016-01-14 13:40 +0100
    Re: [PATCH 2/2] ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a-rayeager board Heiko Stuebner <heiko@sntech.de> - 2016-01-14 13:50 +0100

csiph-web