[PATCH V10 1/4] perf/powerpc: assign an id to each powerpc register

From	Anju T <anju@linux.vnet.ibm.com>
Newsgroups	linux.kernel
Subject	[PATCH V10 1/4] perf/powerpc: assign an id to each powerpc register
Date	2016-01-11 11:30 +0100
Message-ID	<qPHTA-Yo-15@gated-at.bofh.it> (permalink)
References	<qPHTA-Yo-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

The enum definition assigns an 'id' to each register in "struct pt_regs"
of arch/powerpc. The order of these values in the enum definition are
based on the corresponding macros in arch/powerpc/include/uapi/asm/ptrace.h.

Signed-off-by: Anju T <anju@linux.vnet.ibm.com>
Reviewed-by  : Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
---
 arch/powerpc/include/uapi/asm/perf_regs.h | 49 +++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 arch/powerpc/include/uapi/asm/perf_regs.h

diff --git a/arch/powerpc/include/uapi/asm/perf_regs.h b/arch/powerpc/include/uapi/asm/perf_regs.h
new file mode 100644
index 0000000..cfbd068
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/perf_regs.h
@@ -0,0 +1,49 @@
+#ifndef _ASM_POWERPC_PERF_REGS_H
+#define _ASM_POWERPC_PERF_REGS_H
+
+enum perf_event_powerpc_regs {
+	PERF_REG_POWERPC_GPR0,
+	PERF_REG_POWERPC_GPR1,
+	PERF_REG_POWERPC_GPR2,
+	PERF_REG_POWERPC_GPR3,
+	PERF_REG_POWERPC_GPR4,
+	PERF_REG_POWERPC_GPR5,
+	PERF_REG_POWERPC_GPR6,
+	PERF_REG_POWERPC_GPR7,
+	PERF_REG_POWERPC_GPR8,
+	PERF_REG_POWERPC_GPR9,
+	PERF_REG_POWERPC_GPR10,
+	PERF_REG_POWERPC_GPR11,
+	PERF_REG_POWERPC_GPR12,
+	PERF_REG_POWERPC_GPR13,
+	PERF_REG_POWERPC_GPR14,
+	PERF_REG_POWERPC_GPR15,
+	PERF_REG_POWERPC_GPR16,
+	PERF_REG_POWERPC_GPR17,
+	PERF_REG_POWERPC_GPR18,
+	PERF_REG_POWERPC_GPR19,
+	PERF_REG_POWERPC_GPR20,
+	PERF_REG_POWERPC_GPR21,
+	PERF_REG_POWERPC_GPR22,
+	PERF_REG_POWERPC_GPR23,
+	PERF_REG_POWERPC_GPR24,
+	PERF_REG_POWERPC_GPR25,
+	PERF_REG_POWERPC_GPR26,
+	PERF_REG_POWERPC_GPR27,
+	PERF_REG_POWERPC_GPR28,
+	PERF_REG_POWERPC_GPR29,
+	PERF_REG_POWERPC_GPR30,
+	PERF_REG_POWERPC_GPR31,
+	PERF_REG_POWERPC_NIP,
+	PERF_REG_POWERPC_MSR,
+	PERF_REG_POWERPC_ORIG_R3,
+	PERF_REG_POWERPC_CTR,
+	PERF_REG_POWERPC_LNK,
+	PERF_REG_POWERPC_XER,
+	PERF_REG_POWERPC_CCR,
+	PERF_REG_POWERPC_TRAP,
+	PERF_REG_POWERPC_DAR,
+	PERF_REG_POWERPC_DSISR,
+	PERF_REG_POWERPC_MAX,
+};
+#endif /* _ASM_POWERPC_PERF_REGS_H */
-- 
2.1.0

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH V10 1/4] perf/powerpc: assign an id to each powerpc register Anju T <anju@linux.vnet.ibm.com> - 2016-01-11 11:30 +0100

csiph-web