Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1305012

Re: [PATCH 1/6] QE: Add IC, SI and SIRAM document to device tree bindings.

Show all headers | View raw

On Fri, Jan 08, 2016 at 10:18:09AM +0800, Zhao Qiang wrote:
> Add IC, SI and SIRAM document of QE to
> Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>  .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt  | 53 ++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> index 4f89302..5e00fc8 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> @@ -69,6 +69,59 @@ Example:
>  	};
>       };
>  
> +* Interrupt Controller (IC)
> +
> +Required properties:
> +- compatible : should be "fsl,qe-ic".
> +- reg : Address range of IC register set.
> +- interrupts : interrupts generated by the device.

Add interrupt-controller, too.

> +
> +Example:
> +
> +	qeic: interrupt-controller@80 {
> +		interrupt-controller;
> +		compatible = "fsl,qe-ic";
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		reg = <0x80 0x80>;
> +		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
> +	};
> +
> +* Serial Interface Block (SI)
> +
> +The SI manages the routing of eight TDM lines to the QE block serial drivers
> +, the MCC and the UCCs, for receive and transmit.
> +
> +Required properties:
> +- compatible : should be "fsl,qe-si".
> +- reg : Address range of SI register set.
> +
> +Example:
> +
> +	si1: si@700 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;

Why are these needed? There are no child nodes.

> +		compatible = "fsl,qe-si";
> +		reg = <0x700 0x80>;
> +	};
> +
> +* Serial Interface Block RAM(SIRAM)
> +
> +store the routing entries of SI
> +
> +Required properties:
> +- compatible : should be "fsl,qe-siram".
> +- reg : Address range of SI RAM.
> +
> +Example:
> +
> +	siram1: siram@1000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;

ditto.

> +		compatible = "fsl,qe-siram";
> +		reg = <0x1000 0x800>;
> +	};
> +
>  * QE Firmware Node
>  
>  This node defines a firmware binary that is embedded in the device tree, for
> -- 
> 2.1.0.27.g96db324
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 1/6] QE: Add IC, SI and SIRAM document to device tree  bindings. Rob Herring <robh@kernel.org> - 2016-01-08 22:10 +0100

csiph-web