Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1304644

Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings

Show all headers | View raw

On 08/01/2016 14:52, Mark Rutland wrote:
> On Fri, Jan 08, 2016 at 10:15:20PM +0800, John Garry wrote:
>> Add the dt bindings for HiSi SAS controller v2 HW.
>>
>> The main difference in the controllers from dt perspective
>> is interrupts.
>>
>> Signed-off-by: John Garry <john.garry@huawei.com>
>> ---
>>   .../devicetree/bindings/scsi/hisilicon-sas.txt       | 20 +++++++++++++++++++-
>>   1 file changed, 19 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
>> index 0a7a325..2695023 100644
>> --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
>> +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
>> @@ -5,6 +5,7 @@ The HiSilicon SAS controller supports SAS/SATA.
>>   Main node required properties:
>>     - compatible : value should be as follows:
>>   	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
>> +	(b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset
>>     - sas-addr : array of 8 bytes for host SAS address
>>     - reg : Address and length of the SAS register
>>     - hisilicon,sas-syscon: phandle of syscon used for sas control
>> @@ -13,11 +14,11 @@ Main node required properties:
>>     - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
>>     - queue-count : number of delivery and completion queues in the controller
>>     - phy-count : number of phys accessible by the controller
>> -  - interrupts : Interrupts for phys, completion queues, and fatal
>> +  - interrupts : For v1 hw: Interrupts for phys, completion queues, and fatal
>>   		sources; the interrupts are ordered in 3 groups, as follows:
>> -			- Phy interrupts
>> -			- Completion queue interrupts
>> -			- Fatal interrupts
>> +		  - Phy interrupts
>> +		  - Completion queue interrupts
>> +		  - Fatal interrupts
>>   		Phy interrupts : Each phy has 3 interrupt sources:
>>   			- broadcast
>>   			- phyup
>> @@ -25,11 +26,28 @@ Main node required properties:
>>   		The phy interrupts are ordered into groups of 3 per phy
>>   		(broadcast, phyup, and abnormal) in increasing order.
>>   		Completion queue interrupts : each completion queue has 1
>> -			interrupt source.
>> -			The interrupts are ordered in increasing order.
>> +			interrupt source. The interrupts are ordered in
>> +			increasing order.
>>   		Fatal interrupts : the fatal interrupts are ordered as follows:
>>   			- ECC
>>   			- AXI bus
>> +		For v2 hw: Interrupts for phys, Sata, and completion queues;
>> +		the interrupts are ordered in 3 groups, as follows:
>> +		  - Phy interrupts
>> +		  - Sata interrupts
>> +		  - Completion queue interrupts
>> +		Phy interrupts : Each controller has 2 phy interrupts:
>> +			- phy up/down
>> +			- channel interrupt
>> +		Sata interrupts : Each phy on the controller has 1 Sata
>> +			interrupt. The interrupts are ordered in increasing
>> +			order.
>> +		Completion queue interrupts : each completion queue has 1
>> +			interrupt source. The interrupts are ordered in
>> +			increasing order.
>
> There are no fatal interrupts in V2?

For v2 hardware, broadcast and fatal interrupts are mutliplexed into the 
general purpose channel interrupt line.

>
>> +Optional main node properties:
>> + - am-max-trans : limit controller for am max transmissions
>
> Is this a boolean? Number?
>

This is a boolean. It is for dealing with a quirk in the chipset: an 
instance of the controller in the hip06 chipset requires registers set 
with a different init value.

> Thanks,
> Mark.
>

thanks,
john

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings John Garry <john.garry@huawei.com> - 2016-01-08 15:20 +0100
  Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings Mark Rutland <mark.rutland@arm.com> - 2016-01-08 16:00 +0100
    Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings John Garry <john.garry@huawei.com> - 2016-01-08 16:20 +0100
      Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings Mark Rutland <mark.rutland@arm.com> - 2016-01-08 16:30 +0100
        Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings John Garry <john.garry@huawei.com> - 2016-01-08 16:40 +0100
          Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings Mark Rutland <mark.rutland@arm.com> - 2016-01-08 17:50 +0100
            Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings John Garry <john.garry@huawei.com> - 2016-01-11 15:10 +0100
              Re: [PATCH 01/23] devicetree: bindings: hisi_sas: add v2 HW bindings John Garry <john.garry@huawei.com> - 2016-01-12 13:20 +0100

csiph-web