Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document

From	Rob Herring <robh@kernel.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document
Date	2016-01-04 15:10 +0100
Message-ID	<qNdZE-4ui-17@gated-at.bofh.it> (permalink)
References	<qNcqR-3qh-3@gated-at.bofh.it> <qNcqS-3qh-35@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Mon, Jan 04, 2016 at 09:25:29AM -0300, Javier Martinez Canillas wrote:
> Add a Device Tree binding document for the TVP5150 video decoder.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
>  .../devicetree/bindings/media/i2c/tvp5150.txt      | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> new file mode 100644
> index 000000000000..bf0b3f3128ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> @@ -0,0 +1,35 @@
> +* Texas Instruments TVP5150 and TVP5151 video decoders
> +
> +The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
> +(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
> +with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
> +
> +Required Properties:
> +- compatible: value must be "ti,tvp5150"

What about the 5151? The driver never needs to know if SECAM is 
supported or not?

> +- reg: I2C slave address
> +
> +Optional Properties:
> +- powerdown-gpios: phandle for the GPIO connected to the PDN pin, if any.
> +- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
> +
> +The device node must contain one 'port' child node for its digital output
> +video port, in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +
> +&i2c2 {
> +	...
> +	tvp5150@5c {
> +			compatible = "ti,tvp5150";

Too much indentation here.

> +			reg = <0x5c>;
> +			powerdown-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
> +			reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
> +
> +			port {
> +				tvp5150_1: endpoint {
> +					remote-endpoint = <&ccdc_ep>;
> +				};
> +			};
> +	};
> +};
> -- 
> 2.4.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Thread

[PATCH 07/10] [media] tvp5150: Add device tree binding document Javier Martinez Canillas <javier@osg.samsung.com> - 2016-01-04 13:30 +0100
  Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document Rob Herring <robh@kernel.org> - 2016-01-04 15:10 +0100
    Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document Javier Martinez Canillas <javier@osg.samsung.com> - 2016-01-04 17:20 +0100
  Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document Javier Martinez Canillas <javier@osg.samsung.com> - 2016-01-06 11:50 +0100
    Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2016-01-06 12:10 +0100
  Re: [PATCH 07/10] [media] tvp5150: Add device tree binding document Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2016-01-06 12:10 +0100

csiph-web