Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1296708

[PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms

From Kishon Vijay Abraham I <kishon@ti.com>
Newsgroups linux.kernel
Subject [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms
Date 2015-12-22 11:50 +0100
Message-ID <qIsFZ-2OC-31@gated-at.bofh.it> (permalink)
References <qIswi-2KR-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

From: Jaedon Shin <jaedon.shin@gmail.com>

The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.

This new compatible string, "brcm,bcm7425-sata-phy", may be used for
most MIPS-based platforms of 40nm process technology.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../bindings/phy/brcm,brcmstb-sata-phy.txt         |    1 +
 drivers/phy/Kconfig                                |    4 ++--
 drivers/phy/phy-brcmstb-sata.c                     |   24 +++++++++++++++-----
 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
index 7f81ef9..d87ab7c 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: should be one or more of
+     "brcm,bcm7425-sata-phy"
      "brcm,bcm7445-sata-phy"
      "brcm,phy-sata3"
 - address-cells: should be 1
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 90eec60..e7e117d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -390,11 +390,11 @@ config PHY_TUSB1210
 
 config PHY_BRCMSTB_SATA
 	tristate "Broadcom STB SATA PHY driver"
-	depends on ARCH_BRCMSTB
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
 	depends on OF
 	select GENERIC_PHY
 	help
-	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
 	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 
 config PHY_CYGNUS_PCIE
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 555fb2d..a23172f 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -32,8 +32,14 @@
 /* Register offset between PHYs in PCB space */
 #define SATA_MDIO_REG_28NM_SPACE_SIZE			0x1000
 
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_MDIO_REG_40NM_SPACE_SIZE			0x10
+
 enum brcm_sata_phy_version {
 	BRCM_SATA_PHY_28NM,
+	BRCM_SATA_PHY_40NM,
 };
 
 struct brcm_sata_port {
@@ -51,7 +57,7 @@ struct brcm_sata_phy {
 	struct brcm_sata_port phys[MAX_PORTS];
 };
 
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
 	PLL_REG_BANK_0				= 0x50,
 	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
 
@@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm {
 static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
-	u32 offset;
+	u32 offset = 0;
 
 	if (priv->version == BRCM_SATA_PHY_28NM)
 		offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+	else if (priv->version == BRCM_SATA_PHY_40NM)
+		offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
+	else
+		dev_err(priv->dev, "invalid phy version\n");
 
 	return priv->phy_base + (port->portnum * offset);
 }
@@ -93,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
 #define FMAX_VAL_DEFAULT	0x3df
 #define FMAX_VAL_SSC		0x83
 
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_phy_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
@@ -124,12 +134,12 @@ static int brcm_sata_phy_init(struct phy *phy)
 {
 	struct brcm_sata_port *port = phy_get_drvdata(phy);
 
-	brcm_sata_cfg_ssc_28nm(port);
+	brcm_sata_cfg_ssc(port);
 
 	return 0;
 }
 
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
 	.init		= brcm_sata_phy_init,
 	.owner		= THIS_MODULE,
 };
@@ -137,6 +147,8 @@ static const struct phy_ops phy_ops_28nm = {
 static const struct of_device_id brcm_sata_phy_of_match[] = {
 	{ .compatible	= "brcm,bcm7445-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_28NM },
+	{ .compatible	= "brcm,bcm7425-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_40NM },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -196,7 +208,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port = &priv->phys[id];
 		port->portnum = id;
 		port->phy_priv = priv;
-		port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+		port->phy = devm_phy_create(dev, child, &phy_ops);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[GIT PULL 00/28] phy: for 4.5 merge window Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:40 +0100
  [PATCH 21/28] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 03/28] phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 07/28] phy-sun4i-usb: Use of_match_node to get model specific config data Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 23/28] phy: ti-pipe3: move mem resource initialization to a separate function Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 02/28] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 19/28] phy: berlin-usb: don't set device's driver_data Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 22/28] phy: ti-pipe3: move sysctrl initialization to a separate function Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 06/28] phy: phy-mt65xx-usb3: improve HS eye diagram Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 12/28] phy: rockchip-usb: move per-phy init into a separate function Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 15/28] phy: phy_brcmstb_sata: remove duplicate definitions Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 09/28] phy: add phy-hi6220-usb Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 25/28] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 27/28] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 20/28] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 10/28] phy: rockchip-usb: fix clock get-put mismatch Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 24/28] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 01/28] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  [PATCH 14/28] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I <kishon@ti.com> - 2015-12-22 11:50 +0100
  Re: [GIT PULL 00/28] phy: for 4.5 merge window Greg KH <gregkh@linuxfoundation.org> - 2015-12-27 02:10 +0100

csiph-web