Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1295320
| From | Sergei Ianovich <ynvich@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v5] arm: pxa: support ICP DAS LP-8x4x FPGA irq |
| Date | 2015-12-19 08:10 +0100 |
| Message-ID | <qHjOq-8wb-5@gated-at.bofh.it> (permalink) |
| References | <n7BFa-7mf-39@gated-at.bofh.it> <qG3sl-8qM-17@gated-at.bofh.it> <qHjOq-8wb-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Fri, 2015-12-18 at 21:58 -0600, Rob Herring wrote:
> On Tue, Dec 15, 2015 at 10:26:21PM +0300, Sergei Ianovich wrote:
> > +Example:
> > +
> > + fpga: fpga@17000006 {
>
> Nothing else in the fpga? In any case, this node should be named
> interrupt-controller@17000006.
>
> > + compatible = "icpdas,irq-lp8x4x";
>
> As pointed out in the uart binding, don't use wildcards here.
>
> > + reg = <0x17000006 0x16>;
> > + interrupt-parent = <&gpio>;
> > + interrupts = <3 IRQ_TYPE_EDGE_RISING>;
> > + #interrupt-cells = <1>;
> > + interrupt-controller;
> > + status = "okay";
> > + };
> > +
> > + uart@17009050 {
> > + compatible = "icpdas,uart-lp8x4x";
> > + reg = <0x17009050 0x10
> > + 0x17009030 0x02>;
> > + interrupt-parent = <&fpga>;
> > + interrupts = <13>;
> > + status = "okay";
> > + };
That was just an example. The actual binding in LP-8x4x is bigger:
fpga@5 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 5 0x3000000 0x10000>;
interrupt-parent = <&fpgairq>;
rtc@901c {
compatible = "dallas,rtc-ds1302";
reg = <0x901c 0x1>;
status = "okay";
};
sram@a000 {
compatible = "icpdas,sram-lp8x4x";
reg = <0xa000 0x1000
0x901e 0x1>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
};
};
fpgairq: irq@9006 {
compatible = "icpdas,irq-lp8x4x";
reg = <0x9006 0x16>;
interrupt-parent = <&gpio>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
#interrupt-cells = <1>;
interrupt-controller;
status = "okay";
};
uart@9050 {
compatible = "icpdas,uart-lp8x4x";
reg = <0x9050 0x10
0x9030 0x02>;
interrupts = <13>;
status = "okay";
};
uart@9060 {
compatible = "icpdas,uart-lp8x4x";
reg = <0x9060 0x10
0x9032 0x02>;
interrupts = <14>;
status = "okay";
};
uart@9070 {
compatible = "icpdas,uart-lp8x4x";
reg = <0x9070 0x10
0x9034 0x02>;
interrupts = <15>;
status = "okay";
};
backplane {
compatible = "icpdas,backplane-lp8x4x";
reg = <0x0 0x2
0x1000 0x10
0x2000 0x10
0x3000 0x10
0x4000 0x10
0x5000 0x10
0x6000 0x10
0x7000 0x10
0x8000 0x10
0x9002 0x2
0x9004 0x2
0x9046 0x2>;
eeprom-gpios = <&gpio 4 0>;
};
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH v5] arm: pxa: support ICP DAS LP-8x4x FPGA irq Sergei Ianovich <ynvich@gmail.com> - 2015-12-15 20:30 +0100 Re: [PATCH v5] arm: pxa: support ICP DAS LP-8x4x FPGA irq Rob Herring <robh@kernel.org> - 2015-12-19 05:30 +0100 Re: [PATCH v5] arm: pxa: support ICP DAS LP-8x4x FPGA irq Sergei Ianovich <ynvich@gmail.com> - 2015-12-19 08:10 +0100
csiph-web