Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1294889
| From | Daniel Lezcano <daniel.lezcano@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code. |
| Date | 2015-12-18 15:40 +0100 |
| Message-ID | <qH4ml-6QB-7@gated-at.bofh.it> (permalink) |
| References | <qGIcb-Ma-41@gated-at.bofh.it> <qH42Z-6Hj-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
From: Yoshinori Sato <ysato@users.sourceforge.jp>
Remove some legacy code and replace it by the clksrc-of code.
Do some cleanup and code consolidation.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/h8300_timer16.c | 141 +++++++++++++--------------------
drivers/clocksource/h8300_timer8.c | 150 ++++++++++++------------------------
drivers/clocksource/h8300_tpu.c | 117 ++++++++++------------------
3 files changed, 144 insertions(+), 264 deletions(-)
diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
index 0e076c6..cdf0d83 100644
--- a/drivers/clocksource/h8300_timer16.c
+++ b/drivers/clocksource/h8300_timer16.c
@@ -17,6 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/segment.h>
#include <asm/irq.h>
@@ -47,9 +49,7 @@
#define ABSOLUTE 1
struct timer16_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct irqaction irqaction;
unsigned long total_cycles;
unsigned long mapbase;
unsigned long mapcommon;
@@ -144,110 +144,77 @@ static void timer16_disable(struct clocksource *cs)
p->cs_enabled = false;
}
+static struct timer16_priv timer16_priv = {
+ .cs = {
+ .name = "h8300_16timer",
+ .rating = 200,
+ .read = timer16_clocksource_read,
+ .enable = timer16_enable,
+ .disable = timer16_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define REG_CH 0
#define REG_COMM 1
-static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
+static void __init h8300_16timer_init(struct device_node *node)
{
- struct resource *res[2];
+ void __iomem *base[2];
int ret, irq;
unsigned int ch;
+ struct clk *clk;
- p->pdev = pdev;
-
- res[REG_CH] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_CH);
- res[REG_COMM] = platform_get_resource(p->pdev,
- IORESOURCE_MEM, REG_COMM);
- if (!res[REG_CH] || !res[REG_COMM]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
- irq = platform_get_irq(p->pdev, 0);
- if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return irq;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}
- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[REG_CH] = of_iomap(node, 0);
+ if (!base[REG_CH]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
- of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
-
- p->pdev = pdev;
- p->mapbase = res[REG_CH]->start;
- p->mapcommon = res[REG_COMM]->start;
- p->enb = 1 << ch;
- p->imfa = 1 << ch;
- p->imiea = 1 << (4 + ch);
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = timer16_clocksource_read;
- p->cs.enable = timer16_enable;
- p->cs.disable = timer16_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- ret = request_irq(irq, timer16_interrupt,
- IRQF_TIMER, pdev->name, p);
- if (ret < 0) {
- dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- return ret;
+ base[REG_COMM] = of_iomap(node, 1);
+ if (!base[REG_COMM]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_ch;
}
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
-
- return 0;
-}
-
-static int timer16_probe(struct platform_device *pdev)
-{
- struct timer16_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq < 0) {
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_comm;
}
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ of_property_read_u32(node, "renesas,channel", &ch);
- return timer16_setup(p, pdev);
-}
+ timer16_priv.mapbase = (unsigned long)base[REG_CH];
+ timer16_priv.mapcommon = (unsigned long)base[REG_COMM];
+ timer16_priv.enb = 1 << ch;
+ timer16_priv.imfa = 1 << ch;
+ timer16_priv.imiea = 1 << (4 + ch);
-static int timer16_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer16_of_table[] = {
- { .compatible = "renesas,16bit-timer" },
- { }
-};
-static struct platform_driver timer16_driver = {
- .probe = timer16_probe,
- .remove = timer16_remove,
- .driver = {
- .name = "h8300h-16timer",
- .of_match_table = of_match_ptr(timer16_of_table),
+ ret = request_irq(irq, timer16_interrupt,
+ IRQF_TIMER, timer16_priv.cs.name, &timer16_priv);
+ if (ret < 0) {
+ pr_err("failed to request irq %d of clocksource\n", irq);
+ goto unmap_comm;
}
-};
-static int __init timer16_init(void)
-{
- return platform_driver_register(&timer16_driver);
-}
+ clocksource_register_hz(&timer16_priv.cs,
+ clk_get_rate(timer16_priv.clk) / 8);
+ return;
-static void __exit timer16_exit(void)
-{
- platform_driver_unregister(&timer16_driver);
+unmap_comm:
+ iounmap(base[REG_COMM]);
+unmap_ch:
+ iounmap(base[REG_CH]);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(timer16_init);
-module_exit(timer16_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300H 16bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_16bit, "renesas,16bit-timer", h8300_16timer_init);
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 44375d8..f0680eb 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -12,13 +12,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/clockchips.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/irq.h>
@@ -39,10 +40,10 @@
#define RELATIVE 0
#define ABSOLUTE 1
+#define SCALE 64
+
struct timer8_priv {
- struct platform_device *pdev;
struct clock_event_device ced;
- struct irqaction irqaction;
unsigned long mapbase;
raw_spinlock_t lock;
unsigned long flags;
@@ -111,7 +112,7 @@ static void timer8_set_next(struct timer8_priv *p, unsigned long delta)
static int timer8_enable(struct timer8_priv *p)
{
- p->rate = clk_get_rate(p->pclk) / 64;
+ p->rate = clk_get_rate(p->pclk) / SCALE;
ctrl_outw(0xffff, p->mapbase + TCORA);
ctrl_outw(0x0000, p->mapbase + _8TCNT);
ctrl_outw(0x0c02, p->mapbase + _8TCR);
@@ -179,7 +180,7 @@ static int timer8_clock_event_periodic(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);
- dev_info(&p->pdev->dev, "used for periodic clock events\n");
+ pr_info("%s: used for periodic clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, PERIODIC);
@@ -190,7 +191,7 @@ static int timer8_clock_event_oneshot(struct clock_event_device *ced)
{
struct timer8_priv *p = ced_to_priv(ced);
- dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+ pr_info("%s: used for oneshot clock events\n", ced->name);
timer8_stop(p);
timer8_clock_event_start(p, ONESHOT);
@@ -208,110 +209,61 @@ static int timer8_clock_event_next(unsigned long delta,
return 0;
}
-static int timer8_setup(struct timer8_priv *p,
- struct platform_device *pdev)
+static struct timer8_priv timer8_priv = {
+ .ced = {
+ .name = "h8300_8timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = timer8_clock_event_next,
+ .set_state_shutdown = timer8_clock_event_shutdown,
+ .set_state_periodic = timer8_clock_event_periodic,
+ .set_state_oneshot = timer8_clock_event_oneshot,
+ },
+};
+
+static void __init h8300_8timer_init(struct device_node *node)
{
- struct resource *res;
+ void __iomem *base;
int irq;
- int ret;
+ int ret = 0;
+ int rate;
+ struct clk *clk;
- p->pdev = pdev;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ return;
+ }
- res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto free_clk;
}
- irq = platform_get_irq(p->pdev, 0);
+ irq = irq_of_parse_and_map(node, 0);
if (irq < 0) {
- dev_err(&p->pdev->dev, "failed to get irq\n");
- return -ENXIO;
+ pr_err("failed to get irq for clockevent\n");
+ goto unmap_reg;
}
- p->mapbase = res->start;
-
- p->irqaction.name = dev_name(&p->pdev->dev);
- p->irqaction.handler = timer8_interrupt;
- p->irqaction.dev_id = p;
- p->irqaction.flags = IRQF_TIMER;
-
- p->pclk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->pclk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->pclk);
- }
+ timer8_priv.mapbase = (unsigned long)base;
+ timer8_priv.pclk = clk;
- p->ced.name = pdev->name;
- p->ced.features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT;
- p->ced.rating = 200;
- p->ced.cpumask = cpumask_of(0);
- p->ced.set_next_event = timer8_clock_event_next;
- p->ced.set_state_shutdown = timer8_clock_event_shutdown;
- p->ced.set_state_periodic = timer8_clock_event_periodic;
- p->ced.set_state_oneshot = timer8_clock_event_oneshot;
-
- ret = setup_irq(irq, &p->irqaction);
+ ret = request_irq(irq, timer8_interrupt,
+ IRQF_TIMER, timer8_priv.ced.name, &timer8_priv);
if (ret < 0) {
- dev_err(&p->pdev->dev,
- "failed to request irq %d\n", irq);
- return ret;
+ pr_err("failed to request irq %d for clockevent\n", irq);
+ goto unmap_reg;
}
- clockevents_register_device(&p->ced);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int timer8_probe(struct platform_device *pdev)
-{
- struct timer8_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
- }
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- return timer8_setup(p, pdev);
-}
-
-static int timer8_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id timer8_of_table[] __maybe_unused = {
- { .compatible = "renesas,8bit-timer" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, timer8_of_table);
-static struct platform_driver timer8_driver = {
- .probe = timer8_probe,
- .remove = timer8_remove,
- .driver = {
- .name = "h8300-8timer",
- .of_match_table = of_match_ptr(timer8_of_table),
- }
-};
-
-static int __init timer8_init(void)
-{
- return platform_driver_register(&timer8_driver);
-}
-
-static void __exit timer8_exit(void)
-{
- platform_driver_unregister(&timer8_driver);
+ rate = clk_get_rate(clk) / SCALE;
+ clockevents_config_and_register(&timer8_priv.ced, rate, 1, 0x0000ffff);
+ return;
+
+unmap_reg:
+ iounmap(base);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(timer8_init);
-module_exit(timer8_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8/300 8bit Timer Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
diff --git a/drivers/clocksource/h8300_tpu.c b/drivers/clocksource/h8300_tpu.c
index 5487410..ed0b493 100644
--- a/drivers/clocksource/h8300_tpu.c
+++ b/drivers/clocksource/h8300_tpu.c
@@ -1,5 +1,5 @@
/*
- * H8/300 TPU Driver
+ * H8S TPU Driver
*
* Copyright 2015 Yoshinori Sato <ysato@users.sourcefoge.jp>
*
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
-
-#include <asm/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#define TCR 0
#define TMDR 1
@@ -32,9 +32,7 @@
#define TGRD 14
struct tpu_priv {
- struct platform_device *pdev;
struct clocksource cs;
- struct clk *clk;
unsigned long mapbase1;
unsigned long mapbase2;
raw_spinlock_t lock;
@@ -116,91 +114,54 @@ static void tpu_clocksource_disable(struct clocksource *cs)
p->cs_enabled = false;
}
+static struct tpu_priv tpu_priv = {
+ .cs = {
+ .name = "H8S_TPU",
+ .rating = 200,
+ .read = tpu_clocksource_read,
+ .enable = tpu_clocksource_enable,
+ .disable = tpu_clocksource_disable,
+ .mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
#define CH_L 0
#define CH_H 1
-static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
+static void __init h8300_tpu_init(struct device_node *node)
{
- struct resource *res[2];
-
- p->pdev = pdev;
+ void __iomem *base[2];
+ struct clk *clk;
- res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);
- res[CH_H] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_H);
- if (!res[CH_L] || !res[CH_H]) {
- dev_err(&p->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ return;
}
- p->clk = clk_get(&p->pdev->dev, "fck");
- if (IS_ERR(p->clk)) {
- dev_err(&p->pdev->dev, "can't get clk\n");
- return PTR_ERR(p->clk);
+ base[CH_L] = of_iomap(node, CH_L);
+ if (!base[CH_L]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto free_clk;
}
-
- p->mapbase1 = res[CH_L]->start;
- p->mapbase2 = res[CH_H]->start;
-
- p->cs.name = pdev->name;
- p->cs.rating = 200;
- p->cs.read = tpu_clocksource_read;
- p->cs.enable = tpu_clocksource_enable;
- p->cs.disable = tpu_clocksource_disable;
- p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
- p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 64);
- platform_set_drvdata(pdev, p);
-
- return 0;
-}
-
-static int tpu_probe(struct platform_device *pdev)
-{
- struct tpu_priv *p = platform_get_drvdata(pdev);
-
- if (p) {
- dev_info(&pdev->dev, "kept as earlytimer\n");
- return 0;
+ base[CH_H] = of_iomap(node, CH_H);
+ if (!base[CH_H]) {
+ pr_err("failed to map registers for clocksource\n");
+ goto unmap_L;
}
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
+ tpu_priv.mapbase1 = (unsigned long)base[CH_L];
+ tpu_priv.mapbase2 = (unsigned long)base[CH_H];
- return tpu_setup(p, pdev);
-}
+ clocksource_register_hz(&tpu_priv.cs, clk_get_rate(clk) / 64);
-static int tpu_remove(struct platform_device *pdev)
-{
- return -EBUSY;
-}
+ return;
-static const struct of_device_id tpu_of_table[] = {
- { .compatible = "renesas,tpu" },
- { }
-};
-
-static struct platform_driver tpu_driver = {
- .probe = tpu_probe,
- .remove = tpu_remove,
- .driver = {
- .name = "h8s-tpu",
- .of_match_table = of_match_ptr(tpu_of_table),
- }
-};
-
-static int __init tpu_init(void)
-{
- return platform_driver_register(&tpu_driver);
-}
-
-static void __exit tpu_exit(void)
-{
- platform_driver_unregister(&tpu_driver);
+unmap_L:
+ iounmap(base[CH_H]);
+free_clk:
+ clk_put(clk);
}
-subsys_initcall(tpu_init);
-module_exit(tpu_exit);
-MODULE_AUTHOR("Yoshinori Sato");
-MODULE_DESCRIPTION("H8S Timer Pulse Unit Driver");
-MODULE_LICENSE("GPL v2");
+CLOCKSOURCE_OF_DECLARE(h8300_tpu, "renesas,tpu", h8300_tpu_init);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[GIT PULL] clockevents for 4.5 Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-17 16:00 +0100
[PATCH 59/69] clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 11/69] clocksource/drivers/pxa_timer: Move the Kconfig rule Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 31/69] clocksource/drivers/prcmu: Fix Kconfig and add COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 03/69] clocksource/drivers/mtk_timer: Fix memleak in mtk_timer_init() Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 41/69] clocksource/drivers/h8300_timer8: Remove unused headers Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 05/69] clocksource/drivers/rockchip: Make the driver more readable Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 01/69] clocksource/drivers/mtk_timer: Add pr_fmt define Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 21/69] clocksource/drivers/dw_apb: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 07/69] clocksource/drivers/rockchip: Remove dsb() usage Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 34/69] clocksource/drivers/fsl-ftm: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 25/69] clocksource/drivers/vt8500: Remove unneeded header Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 53/69] clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:20 +0100
[PATCH 49/69] clocksource/drivers/h8300_timer16: Remove unused macros Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 54/69] clocksource/drivers/h8300_timer8: Separate the Kconfig option from the arch Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 51/69] clocksource/drivers/h8300_timer16: Fix irq return value check Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 66/69] clocksource/drivers/h8300: Fix timer not overflow case Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 47/69] clocksource/drivers/h8300_timer8: Retrieve the clock rate at init time Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 60/69] clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 65/69] clocksource/drivers/h8300: Change to overflow interrupt Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 55/69] h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl] Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 52/69] clocksource/drivers/h8300_timer16: Remove pointless lock Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 64/69] clocksource/drivers/lpc32: Correct pr_err() output format Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 48/69] clocksource/drivers/h8300_timer16: Remove pointless headers Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 63/69] clocksource/drivers/arm_global_timer: Fix suspend resume Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 68/69] clocksource/drivers/h8300: Initializer cleanup. Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 56/69] clocksource/drivers/h8300: Increase the compilation test coverage Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 67/69] clocksource/drivers/h8300: Simplify delta handling Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 50/69] clocksource/drivers/h8300_timer16: Remove unused fields in timer16_priv Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 44/69] clocksource/drivers/h8300_timer8: Fix irq return value check Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 58/69] clocksource/drivers/dw_apb_timer: Fix apbt_readl return types Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 45/69] clocksource/drivers/h8300_timer8: Remove pointless irq re-entrant safe code Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 62/69] clocksource/drivers/pistachio: Fix wrong calculated clocksource read value Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 46/69] clocksource/drivers/h8300_timer8: Remove irq and lock legacy code Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 69/69] clocksource/drivers/h8300: Use ioread / iowrite Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 61/69] clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 57/69] clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:30 +0100
[PATCH 43/69] clocksource/drivers/h8300_timer8: Remove PERIODIC and ONESHOT macro Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 20/69] clocksource/drivers/digicolor: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 19/69] clocksource/drivers/orion: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 37/69] clocksource/drivers/h8300: Cleanup startup and remove module code. Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 30/69] clocksource/drivers/nomadik_mtu: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 40/69] clocksource/drivers/h8300_tpu: Remove pointless headers for TPU Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 39/69] clocksource/drivers/h8300_tpu: Remove unused macros Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 35/69] clocksource/drivers/Kconfig: Add missing GENERIC_CLOCKEVENTS dependency Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 27/69] clocksource/drivers/cadence_ttc: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 13/69] clocksource/drivers/tango: Add COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 17/69] clocksource/drivers/armada-370-xp: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 38/69] clocksource/drivers/h8300_timer8: Fix compilation error with dev_warn Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 42/69] clocksource/drivers/h8300_timer8: Remove unused macros Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 36/69] clocksource/drivers/dw_apb_timer_of: Implement ARM delay timer Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 26/69] clocksource/drivers/vt8500: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 22/69] clocksource/drivers/sun4i: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 12/69] clocksource/drivers/pxa_timer: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 23/69] clocksource/drivers/sun5i: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 28/69] clocksource/drivers/asm9260: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 18/69] clocksource/drivers/meson6: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 32/69] clocksource/drivers/exynos_mct: Fix Kconfig and add COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 24/69] clocksource/drivers/tegra2: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 29/69] clocksource/drivers/lpc32xx: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 33/69] clocksource/drivers/samsung-pwm: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:40 +0100
[PATCH 14/69] clocksource/drivers/pistachio: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 08/69] clocksource/drivers/qcom: Make COMPILE_TEST enabled for ARM architecture Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 09/69] clocksource/drivers/st_lpc: Fix Kconfig dependency Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 02/69] clocksource/drivers/mtk_timer: Fix pr_warn() messages in mtk_timer_init Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
Re: [PATCH 02/69] clocksource/drivers/mtk_timer: Fix pr_warn() messages in mtk_timer_init Matthias Brugger <matthias.bgg@gmail.com> - 2015-12-30 19:20 +0100
[PATCH 15/69] clocksource/drivers/mediatek: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
Re: [PATCH 15/69] clocksource/drivers/mediatek: Add the COMPILE_TEST option Matthias Brugger <matthias.bgg@gmail.com> - 2015-12-30 19:20 +0100
[PATCH 10/69] clocksource/drivers/st_lpc: Add the COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 06/69] time: Define dummy functions for the generic sched clock Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 16/69] clocksource/drivers/rockchip: Add COMPILE_TEST option Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
[PATCH 04/69] clocksource/drivers/tegra: Allow timer irq affinity change Daniel Lezcano <daniel.lezcano@linaro.org> - 2015-12-18 15:50 +0100
csiph-web