Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1292859

Re: [PATCH 2/3] Add support for monitoring gpio switches

Show all headers | View raw

On 11/12/15 09:08, Linus Walleij wrote:
> On Fri, Dec 4, 2015 at 6:31 PM, Martyn Welch
> <martyn.welch@collabora.co.uk> wrote:
>
>> Select Chromebooks have gpio attached to switches used to cause the
>> firmware to enter alternative modes of operation and/or control other
>> device characteristics (such as write protection on flash devices). This
>> patch adds a driver that exposes a read-only interface to allow these
>> signals to be read from user space.
>>
>> This functionality has been generalised to provide support for any device
>> with device tree support which needs to identify a gpio as being used for a
>> specific task.
>>
>> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
>
> If you want to do this thing, also propose a device tree binding document
> for "gpio-switch".
>
> But first (from Documentation/gpio/drivers-on-gpio.txt):
>
> - gpio-keys: drivers/input/keyboard/gpio_keys.c is used when your GPIO line
>    can generate interrupts in response to a key press. Also supports debounce.
>

This one generates input events from gpio. I'm not looking to generate 
events.

> - gpio-keys-polled: drivers/input/keyboard/gpio_keys_polled.c is used when your
>    GPIO line cannot generate interrupts, so it needs to be periodically polled
>    by a timer.
>

Ditto (but using a polled mechanism rather than interrupts)

> - extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an
>    external connector status, such as a headset line for an audio driver or an
>    HDMI connector. It will provide a better userspace sysfs interface than GPIO.
>

This appears to be exclusively for monitoring insertion events, or am I 
missing something?

> So you mean none of these apply for this case?
>

No, I'm looking for a mechanism to identify GPIO as connected to a 
specific signal, which is provided across multiple devices, but which 
might be implemented subtly differently on different platforms (i.e. 
active high/low) and on different GPIO lines.

> Second: what you want to do is export a number of GPIOs with certain names
> to userspace. This is something very generic and should be implemented
> as such, not as something Chromebook-specific.
>

I'd agree that my first implementation was ChromeBook specific, but I'm 
fairly sure that my last attempt wasn't. I've mentioned ChromeBooks as 
an example of an existing use case.

> Patches like that has however already been suggested, and I have NACKed
> them because the GPIO sysfs ABI is insane, and that is why I am refactoring
> the world to create a proper chardev ABI for GPIO instead. See:
> http://marc.info/?l=linux-gpio&m=144550276512673&w=2
>

I can certainly understand the rationale for the changes that you are 
proposing, though do worry that it does make it a bit tougher to use 
from scripting languages. I see that the question of how to provide 
functionality equivalent to the above was raised and no answer was 
forthcoming. Is there a plan for supporting the identification of a GPIO 
line serving a specific purpose?

What is the status of the mentioned patch series?

Martyn

> So for the moment, NACK on this, please participate in creating the
> *right* ABI for GPIO instead of trying to shoehorn stuff into the dying
> sysfs ABI.
>
> Yours,
> Linus Walleij
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 2/3] Add support for monitoring gpio switches Martyn Welch <martyn.welch@collabora.co.uk> - 2015-12-16 11:20 +0100
  Re: [PATCH 2/3] Add support for monitoring gpio switches Linus Walleij <linus.walleij@linaro.org> - 2015-12-22 10:30 +0100

csiph-web