Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1294624

Re: [PATCH v2] mmc: sdhci: restore behavior when setting VDD via external regulator

Show all headers | View raw

On 18 December 2015 at 09:11, Ludovic Desroches
<ludovic.desroches@atmel.com> wrote:
> Hi Ulf, Jisheng,
>
> On Fri, Dec 11, 2015 at 03:48:04PM +0100, Ulf Hansson wrote:
>> + Ludovic (We had some discussions around this code recently as well)
>>
>> On 11 December 2015 at 14:36, Jisheng Zhang <jszhang@marvell.com> wrote:
>> > After commit 52221610dd84 ("mmc: sdhci: Improve external VDD regulator
>> > support"), for the VDD is supplied via external regulators, we ignore
>> > the code to convert a VDD voltage request into one of the standard
>> > SDHCI voltage levels, then program it in the SDHCI_POWER_CONTROL. This
>> > brings two issues:
>> >
>> > 1. SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk isn't handled properly any
>> > more.
>> >
>> > 2. What's more, once SDHCI_POWER_ON bit is set, some controllers such
>> > as the sdhci-pxav3 used in marvell berlin SoCs require the voltage
>> > levels programming in the SDHCI_POWER_CONTROL register, even the VDD
>> > is supplied by external regulator. So the host in marvell berlin SoCs
>> > still works fine after the commit. However, commit 3cbc6123a93d ("mmc:
>> > sdhci: Set SDHCI_POWER_ON with external vmmc") sets the SDHCI_POWER_ON
>> > bit, this would make the host in marvell berlin SoCs won't work any
>> > more with external vmmc.
>> >
>> > This patch restores the behavior when setting VDD through external
>> > regulator by moving the call of mmc_regulator_set_ocr() to the end
>> > of sdhci_set_power() function.
>> >
>> > After this patch, the sdcard on Marvell Berlin SoC boards work again.
>> >
>> > Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
>> > Fixes: 52221610dd84 ("mmc: sdhci: Improve external VDD ...")
>
> Reviewed-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>
> Even if the patch sounds good for me, I wanted to test it. As planned,
> with this patch, I can describe my vcc regulator without breaking the
> behavior of my sdhci controller.
>

Okay! According to the reasoning and testing, this change seems like a
good idea!

I have now queued the v2 for next.

Thanks!

Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2] mmc: sdhci: restore behavior when setting VDD via  external regulator Ludovic Desroches <ludovic.desroches@atmel.com> - 2015-12-18 09:20 +0100
  Re: [PATCH v2] mmc: sdhci: restore behavior when setting VDD via  external regulator Ulf Hansson <ulf.hansson@linaro.org> - 2015-12-18 11:00 +0100

csiph-web