Re: [PATCH v2 4/8] dt-bindings: Add a binding for Mediatek Video Encoder

From	Matthias Brugger <matthias.bgg@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 4/8] dt-bindings: Add a binding for Mediatek Video Encoder
Date	2015-12-14 12:40 +0100
Message-ID	<qFzDY-5yq-9@gated-at.bofh.it> (permalink)
References	<qEsEz-2v0-3@gated-at.bofh.it> <qEsEz-2v0-17@gated-at.bofh.it> <qEzG1-7up-9@gated-at.bofh.it> <qFwG6-3zr-25@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw


On 14/12/15 09:26, tiffany lin wrote:
> On Fri, 2015-12-11 at 11:29 -0600, Rob Herring wrote:
>> On Fri, Dec 11, 2015 at 05:55:39PM +0800, Tiffany Lin wrote:
>>> Add a DT binding documentation of Video Encoder for the
>>> MT8173 SoC from Mediatek.
>>>
>>> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>
>> A question and minor issue below, otherwise:
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>>
>>> ---
>>>   .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
>>>   1 file changed, 58 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>> new file mode 100644
>>> index 0000000..510cd81
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>> @@ -0,0 +1,58 @@
>>> +Mediatek Video Codec
>>> +
>>> +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
>>> +supports high resolution encoding functionalities.
>>> +
>>> +Required properties:
>>> +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
>>> +- reg : Physical base address of the video codec registers and length of
>>> +  memory mapped region.
>>> +- interrupts : interrupt number to the cpu.
>>> +- mediatek,larb : must contain the local arbiters in the current Socs.

This looks strange, shouldn't it be "larb" instead of "mediatek,larb".
At least the example does not use the mediatek prefix.

>>> +- clocks : list of clock specifiers, corresponding to entries in
>>> +  the clock-names property;
>>> +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
>>> +- iommus : list of iommus specifiers should be enabled for hw encode.
>>> +  There are 2 cells needed to enable/disable iommu.
>>> +  The first one is local arbiter index(larbid), and the other is port
>>> +  index(portid) within local arbiter. Specifies the larbid and portid
>>> +  as defined in dt-binding/memory/mt8173-larb-port.h.
>>> +- mediatek,vpu : the node of video processor unit

Same here.

Regards,
Matthias

>>> +
>>> +Example:
>>> +vcodec_enc: vcodec@0x18002000 {
>>> +    compatible = "mediatek,mt8173-vcodec-enc";
>>> +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
>>> +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
>>> +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
>>> +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
>>> +    larb = <&larb3>,
>>> +           <&larb5>;
>>> +    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
>>
>> Is this the same iommu as the VPU? If so, you can't have a mixed number
>> of cells.
> Yes, its same iommus as the VPU.
> Now we use two parameters for iommus.
> We will fix this in next version.
>
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
>>> +    vpu = <&vpu>;
>>
>> Need to update the example.
> Sorry, I didn't get it.
> Do you means update VPU binding document "media/mediatek-vpu.txt"?
>
>>
>>> +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
>>> +             <&topckgen CLK_TOP_VENC_LT_SEL>,
>>> +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
>>> +    clock-names = "vencpll",
>>> +                  "venc_lt_sel",
>>> +                  "vcodecpll_370p5_ck";
>>> +  };
>>> --
>>> 1.7.9.5
>>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Thread

Re: [PATCH v2 4/8] dt-bindings: Add a binding for Mediatek Video  Encoder tiffany lin <tiffany.lin@mediatek.com> - 2015-12-14 09:30 +0100
  Re: [PATCH v2 4/8] dt-bindings: Add a binding for Mediatek Video  Encoder Matthias Brugger <matthias.bgg@gmail.com> - 2015-12-14 12:40 +0100
    Re: [PATCH v2 4/8] dt-bindings: Add a binding for Mediatek Video  Encoder tiffany lin <tiffany.lin@mediatek.com> - 2015-12-15 09:30 +0100

csiph-web