Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1291909
| From | Jiang Liu <jiang.liu@linux.intel.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed |
| Date | 2015-12-15 09:00 +0100 |
| Message-ID | <qFSGD-14V-11@gated-at.bofh.it> (permalink) |
| References | <qEqMr-19l-17@gated-at.bofh.it> <qFuXD-2r2-15@gated-at.bofh.it> <qFvh0-2xT-15@gated-at.bofh.it> <qFy5c-4ms-13@gated-at.bofh.it> |
| Organization | Intel |
[Multipart message — attachments visible in raw view] - view raw
On 2015/12/14 17:54, Borislav Petkov wrote:
> On Mon, Dec 14, 2015 at 02:54:02PM +0800, Huang, Ying wrote:
>> No, there are no other systems reporting the same issue. I will queue
>> more tests for make sure this is not a false positive.
>
> I can trigger this too with my guest here.
>
> I have these two ontop of rc5:
>
> cc22b9b83f6a x86/irq: Enhance __assign_irq_vector() to rollback in case of failure
> 45dd79e03e1e x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer
> 9f9499ae8e64 Linux 4.4-rc5
>
> and my guest stalls while booting.
>
> The new thing I see in dmesg is this:
>
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> +..MP-BIOS bug: 8254 timer not connected to IO-APIC
> +...trying to set up timer (IRQ0) through the 8259A ...
> +..... (found apic 0 pin 2) ...
> +....... failed.
> +...trying to set up timer as Virtual Wire IRQ...
> +..... failed.
> +...trying to set up timer as ExtINT IRQ...
> +..... works.
> +APIC calibration not consistent with PM-Timer: 111ms instead of 100ms
> +APIC delta adjusted to PM-Timer: 6248393 (6997337)
>
> which leads to boot stalling and timeoutting when loading the hdd
> driver:
Hi Boris and Ying,
Aha, found a possible regression. Could you please help to
apply the attached bugfix patch ontop of "cc22b9b83f6a x86/irq:
Enhance __assign_irq_vector() to rollback in case of failure"?
Hi Ying, I have push this patch to github so it should reach
0day test farm soon:)
Thanks,
Gerry
>
> ...
> [ 3.973447] console [netcon0] enabled
> [ 3.976099] netconsole: network logging started
> [ 3.979604] rtc_cmos 00:00: setting system clock to 2015-12-14 10:45:35 UTC (1450089935)
> [ 3.985348] PM: Checking hibernation image partition /dev/sdb1
> [ 6.600706] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
> [ 6.613651] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
> [ 6.636905] usb 1-1: Product: QEMU USB Tablet
> [ 6.642248] usb 1-1: Manufacturer: QEMU
> [ 6.647109] usb 1-1: SerialNumber: 42
> [ 7.580995] ata2.00: qc timeout (cmd 0xa0)
> [ 7.589300] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 7.750715] ata2.01: NODEV after polling detection
> [ 7.759605] ata2.00: configured for MWDMA2
> [ 8.585691] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
> [ 8.602467] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
> [ 12.760846] ata2.00: qc timeout (cmd 0xa0)
> [ 12.786543] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 12.796576] ata2.00: limiting speed to MWDMA2:PIO3
> [ 12.958455] ata2.01: NODEV after polling detection
> [ 12.969693] ata2.00: configured for MWDMA2
> [ 17.972782] ata2.00: qc timeout (cmd 0xa0)
> [ 17.978967] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
> [ 17.983495] ata2.00: disabled
> [ 17.986352] ata2: soft resetting link
> [ 18.146586] ata2.01: NODEV after polling detection
> [ 18.151413] ata2: EH complete
> [ 32.745227] ata1: lost interrupt (Status 0x50)
> [ 32.748470] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 32.756586] ata1.00: failed command: READ DMA
> [ 32.761251] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 32.761251] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 32.773928] ata1.00: status: { DRDY }
> [ 32.777028] ata1: soft resetting link
> [ 32.934437] ata1.01: NODEV after polling detection
> [ 32.946663] ata1.00: configured for MWDMA2
> [ 32.949964] ata1.00: device reported invalid CHS sector 0
> [ 32.953793] ata1: EH complete
> [ 63.849089] ata1: lost interrupt (Status 0x50)
> [ 63.857470] ata1.00: limiting speed to MWDMA1:PIO4
> [ 63.860982] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
> [ 63.865862] ata1.00: failed command: READ DMA
> [ 63.883697] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
> [ 63.883697] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> [ 63.899573] ata1.00: status: { DRDY }
> [ 63.902649] ata1: soft resetting link
> [ 64.062580] ata1.01: NODEV after polling detection
> [ 64.073800] ata1.00: configured for MWDMA1
> [ 64.076813] ata1.00: device reported invalid CHS sector 0
> [ 64.096188] ata1: EH complete
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Re: [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-14 07:40 +0100
Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed "Huang\, Ying" <ying.huang@intel.com> - 2015-12-14 08:00 +0100
Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed Borislav Petkov <bp@alien8.de> - 2015-12-14 11:00 +0100
Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-15 09:00 +0100
Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed Borislav Petkov <bp@alien8.de> - 2015-12-15 11:10 +0100
Re: [LKP] [lkp] [x86/irq] 4c24cee6b2: IP-Config: Auto-configuration of network failed Thomas Gleixner <tglx@linutronix.de> - 2015-12-19 21:40 +0100
[Bugfix v2 5/5] x86/irq: Trivial cleanups for x86 vector allocation code Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-23 15:20 +0100
[Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-23 15:20 +0100
[Bugfix v2 3/5] x86/irq: Fix a race window in x86_vector_free_irqs() Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-23 15:20 +0100
Re: [Bugfix v2 3/5] x86/irq: Fix a race window in x86_vector_free_irqs() Thomas Gleixner <tglx@linutronix.de> - 2015-12-29 14:50 +0100
[Bugfix v2 2/5] x86/irq: Enhance __assign_irq_vector() to rollback in case of failure Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-23 15:20 +0100
Re: [Bugfix v2 2/5] x86/irq: Enhance __assign_irq_vector() to rollback in case of failure Thomas Gleixner <tglx@linutronix.de> - 2015-12-30 20:00 +0100
[Bugfix v2 4/5] x86/irq: Fix a race condition between vector assigning and cleanup Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-23 15:20 +0100
Re: [Bugfix v2 4/5] x86/irq: Fix a race condition between vector assigning and cleanup Borislav Petkov <bp@alien8.de> - 2015-12-23 19:50 +0100
Re: [Bugfix v2 4/5] x86/irq: Fix a race condition between vector assigning and cleanup Thomas Gleixner <tglx@linutronix.de> - 2015-12-30 18:30 +0100
Re: [Bugfix v2 4/5] x86/irq: Fix a race condition between vector assigning and cleanup Thomas Gleixner <tglx@linutronix.de> - 2015-12-31 00:00 +0100
Re: [Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Borislav Petkov <bp@alien8.de> - 2015-12-23 20:20 +0100
Re: [Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Jeremiah Mahler <jmmahler@gmail.com> - 2015-12-24 06:20 +0100
Re: [Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Jiang Liu <jiang.liu@linux.intel.com> - 2015-12-28 09:30 +0100
Re: [Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Jeremiah Mahler <jmmahler@gmail.com> - 2015-12-29 04:30 +0100
Re: [Bugfix v2 1/5] x86/irq: Do not reuse struct apic_chip_data.old_domain as temporary buffer Joe Lawrence <joe.lawrence@stratus.com> - 2015-12-24 15:40 +0100
csiph-web