[PATCH v6 3/4] arm64: Juno: Add HDLCD support to the Juno boards.

Path	csiph.com!eternal-september.org!feeder.eternal-september.org!aioe.org!bofh.it!news.nic.it!robomod
From	Liviu Dudau <Liviu.Dudau@arm.com>
Newsgroups	linux.kernel
Subject	[PATCH v6 3/4] arm64: Juno: Add HDLCD support to the Juno boards.
Date	Fri, 11 Dec 2015 16:10:03 +0100
Message-ID	<qExuz-69x-41@gated-at.bofh.it> (permalink)
References	<qExuy-69x-3@gated-at.bofh.it>
X-Original-To	David Airlie <airlied@linux.ie>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, Rob Herring <robh+dt@kernel.org>, Sudeep Holla <sudeep.holla@arm.com>, Jon Medhurst <tixy@linaro.org>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Rob Herring <robh@kernel.org>, Russell King <rmk+kernel@arm.linux.org.uk>
X-Mailer	git-send-email 2.6.4
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	95
Organization	linux.* mail to news gateway
X-Original-Cc	Pawel Moll <pawel.moll@arm.com>, Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Punit Agrawal <punit.agrawal@arm.com>, DRI devel <dri-devel@lists.freedesktop.org>, devicetree <devicetree@vger.kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Andrew Morton <akpm@linux-foundation.org>, LAKML <linux-arm-kernel@lists.infradead.org>, LKML <linux-kernel@vger.kernel.org>
X-Original-Date	Fri, 11 Dec 2015 15:04:46 +0000
X-Original-Message-ID	<1449846287-21398-4-git-send-email-Liviu.Dudau@arm.com>
X-Original-References	<1449846287-21398-1-git-send-email-Liviu.Dudau@arm.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1289661

Show key headers only | View raw

ARM's Juno board has two HDLCD controllers, each linked to an NXP
TDA19988 HDMI transmitter that provides output encoding. Add them
to the device tree.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index dd5158e..8ee094a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -92,8 +92,8 @@
 			scpi_clk: scpi_clocks@3 {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
-				clock-indices = <3>, <4>;
-				clock-output-names = "pxlclk0", "pxlclk1";
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
 			};
 		};
 
@@ -123,6 +123,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint@0 {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint@0 {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -141,14 +169,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter@70 {
+		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint@0 {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter@71 {
+		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint@0 {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};
 
-- 
2.6.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v6 3/4] arm64: Juno: Add HDLCD support to the Juno boards. Liviu Dudau <Liviu.Dudau@arm.com> - 2015-12-11 16:10 +0100

csiph-web