Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1288221

Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for Exynos4x12

Show key headers only | View raw

On 2015년 12월 10일 14:57, Krzysztof Kozlowski wrote:
> On 09.12.2015 13:08, Chanwoo Choi wrote:
>> This patch adds the bus noes using VDD_INT for Exynos4x12 SoC.
>> Exynos4x12 has the following AXI buses to translate data between
>> DRAM and sub-blocks.
>>
>> Following list specifies the detailed relation between DRAM and sub-blocks:
>> - ACLK100 clock for PERIL/PERIR/MFC(PCLK)
>> - ACLK160 clock for CAM/TV/LCD
>> : The minimum clock of ACLK160 should be over 160MHz.
>>   When drop the clock under 160MHz, show the broken image.
>> - ACLK133 clock for FSYS
>> - GDL clock for LEFTBUS
>> - GDR clock for RIGHTBUS
>> - SCLK_MFC clock for MFC
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos4x12.dtsi | 112 ++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 112 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
>> index 3bcf0939755e..8bc4aee156b5 100644
>> --- a/arch/arm/boot/dts/exynos4x12.dtsi
>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
>> @@ -354,6 +354,118 @@
>>  			opp-microvolt = <950000>;
>>  		};
>>  	};
>> +
>> +	bus_leftbus: bus_leftbus {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_DIV_GDL>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_leftbus_opp_table>;
>> +		status = "disabled";
>> +	};
>> +
>> +	bus_rightbus: bus_rightbus {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_DIV_GDR>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_leftbus_opp_table>;
>> +		status = "disabled";
>> +	};
> 
> These two nodes are symmetrical. The MFC below and other buses in other
> DTS share opps. How about changing the binding so multiple clocks could
> be specified at once ("bus0", "bus1")? I think there is no need for a
> bus device for each clock.

The your commented method is possible.

But, I focus on implementing the generic bus frequency driver.

If specific bus device-tree node includes the one more clocks,
when adding the new Exynos SoC, the exynos-bus.c should be added
for new Exynos SoC. Because, each Exynos SoC has the different
set of bus device.

If we use my approach, we don't need to modify the exynos-bus.c
driver to support for the bus frequency of new Exynos SoC.

Best Regards,
Chanwoo Choi

> 
> Best regards,
> Krzysztof
> 
>> +
>> +	bus_display: bus_display {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_ACLK160>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_display_opp_table>;
>> +		status = "disabled";
>> +	};
>> +
>> +	bus_fsys: bus_fsys {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_ACLK133>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_fsys_opp_table>;
>> +		status = "disabled";
>> +	};
>> +
>> +	bus_peri: bus_peri {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_ACLK100>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_peri_opp_table>;
>> +		status = "disabled";
>> +	};
>> +
>> +	bus_mfc: bus_mfc {
>> +		compatible = "samsung,exynos-bus";
>> +		clocks = <&clock CLK_SCLK_MFC>;
>> +		clock-names = "bus";
>> +		operating-points-v2 = <&bus_leftbus_opp_table>;
>> +		status = "disabled";
>> +	};
>> +
>> +	bus_leftbus_opp_table: opp_table3 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp00 {
>> +			opp-hz = /bits/ 64 <100000000>;
>> +			opp-microvolt = <900000>;
>> +		};
>> +		opp01 {
>> +			opp-hz = /bits/ 64 <134000000>;
>> +			opp-microvolt = <925000>;
>> +		};
>> +		opp02 {
>> +			opp-hz = /bits/ 64 <160000000>;
>> +			opp-microvolt = <950000>;
>> +		};
>> +		opp03 {
>> +			opp-hz = /bits/ 64 <200000000>;
>> +			opp-microvolt = <1000000>;
>> +		};
>> +	};
>> +
>> +	bus_display_opp_table: opp_table4 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp00 {
>> +			opp-hz = /bits/ 64 <160000000>;
>> +			opp-microvolt = <950000>;
>> +		};
>> +		opp01 {
>> +			opp-hz = /bits/ 64 <200000000>;
>> +			opp-microvolt = <1000000>;
>> +		};
>> +	};
>> +
>> +	bus_fsys_opp_table: opp_table5 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp00 {
>> +			opp-hz = /bits/ 64 <100000000>;
>> +			opp-microvolt = <900000>;
>> +		};
>> +		opp01 {
>> +			opp-hz = /bits/ 64 <134000000>;
>> +			opp-microvolt = <925000>;
>> +		};
>> +	};
>> +
>> +	bus_peri_opp_table: opp_table6 {
>> +		compatible = "operating-points-v2";
>> +		opp-shared;
>> +
>> +		opp00 {
>> +			opp-hz = /bits/ 64 <50000000>;
>> +			opp-microvolt = <900000>;
>> +		};
>> +		opp01 {
>> +			opp-hz = /bits/ 64 <100000000>;
>> +			opp-microvolt = <925000>;
>> +		};
>> +	};
>>  };
>>  
>>  &combiner {
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-09 05:20 +0100
  Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-12-10 07:00 +0100
    Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-10 07:10 +0100
      Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-12-10 07:40 +0100
        Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-10 07:50 +0100
          Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-12-10 08:00 +0100
            Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-10 08:10 +0100
              Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-12-10 08:20 +0100
                Re: [PATCH v2 14/19] ARM: dts: Add bus nodes using VDD_INT for  Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-10 08:20 +0100

csiph-web