Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1286698

Re: [PATCH v3] bus: uniphier-system-bus: add UniPhier System Bus driver

From Arnd Bergmann <arnd@arndb.de>
Newsgroups linux.kernel
Subject Re: [PATCH v3] bus: uniphier-system-bus: add UniPhier System Bus driver
Date 2015-12-08 18:10 +0100
Message-ID <qDtW1-59U-21@gated-at.bofh.it> (permalink)
References <qDtjj-4FX-11@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Wednesday 09 December 2015 01:21:58 Masahiro Yamada wrote:
> The UniPhier System Bus is an external that connects on-board devices
> to the UniPhier SoC.  Each bank (chip select) is dynamically mapped
> to the CPU-viewed address base via the bus controller.  The bus
> controller must be configured before any access to the bus.
> 
> This driver parses the "ranges" property of the System Bus node and
> initialized the bus controller.  After the bus becomes ready, devices
> below it are populated.
> 
> Note:
> Each bank can be mapped anywhere in the supported address space;
> there is nothing preventing us from assigning bank 0 on 0x42000000,
> 0x43000000, or anywhere as long as such region is not used by others.
> So, the "ranges" is just one possible software configuration, which
> does not seem to fit in device tree because device tree is a hardware
> description language.  However, of_translate_address() requires
> "ranges" in every bus node between CPUs and device mapped on the CPU
> address space.  In other words, "ranges" properties must be statically
> defined in device tree.  After some discussion, I decided the dynamic
> address reassignment by the driver is too bothersome.  Instead, the
> device tree should provide a reasonable translation setup that the OS
> can rely on.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Rob Herring <robh@kernel.org>

Looks very nice.

Acked-by: Arnd Bergmann <arnd@arndb.de>

Just a little thought about one thing I found odd:

> +static int uniphier_system_bus_check_overlap(
> +					struct uniphier_system_bus_priv tmp)
> +{

Did you intentionally pass this by value? Maybe do it explicitly using a pointer
and memcpy to a local variable, which has a similar effect. Alternatively
just check each newly probed child node for conflicts with any of the
previous children. That is slightly more expensive at O(n^2) instead of O(n)
but n is always small here and you can avoid sorting first.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v3] bus: uniphier-system-bus: add UniPhier System Bus driver Masahiro Yamada <yamada.masahiro@socionext.com> - 2015-12-08 17:30 +0100
  Re: [PATCH v3] bus: uniphier-system-bus: add UniPhier System Bus driver Arnd Bergmann <arnd@arndb.de> - 2015-12-08 18:10 +0100
    Re: [PATCH v3] bus: uniphier-system-bus: add UniPhier System Bus driver Masahiro Yamada <yamada.masahiro@socionext.com> - 2015-12-09 05:00 +0100

csiph-web