Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1286270

[PATCH v6 4/8] spi: imx: defer spi initialization, if DMA engine is

Show all headers | View raw

If SPI device supports DMA mode, but DMA controller is not yet
available due to e.g. a delay in the corresponding kernel module
initialization, retry to initialize SPI driver later on instead of
falling back into PIO only mode.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
---
 drivers/spi/spi-imx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index c123060..d98c33c 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1222,6 +1222,9 @@ static int spi_imx_probe(struct platform_device *pdev)
 	 */
 	if (is_imx51_ecspi(spi_imx)) {
 		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master, res);
+		if (ret == -EPROBE_DEFER)
+			goto out_clk_put;
+
 		if (ret < 0)
 			dev_err(&pdev->dev, "dma setup error %d, use pio\n",
 				ret);
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v6 0/8]  Improvements for SPI IMX driver for Freescale ECSPI controller, continuation Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 4/8] spi: imx: defer spi initialization, if DMA engine is Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 2/8] spi: imx: enable loopback only for ECSPI controller family Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 6/8] spi: imx: remove dead RX DMA tail handling code Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 8/8] spi: imx: add support for all SPI word width for DMA Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 1/8] spi: imx: fix loopback mode setup after controller reset Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 3/8] spi: imx: return error from dma channel request Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 5/8] spi: imx: allow only WML aligned transfers to use DMA Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100
  [PATCH v6 7/8] spi: imx: replace fixed timeout with calculated Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-12-08 07:50 +0100

csiph-web