Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1287798

Re: [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type

From Rob Herring <robh@kernel.org>
Newsgroups linux.kernel
Subject Re: [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type
Date 2015-12-09 21:10 +0100
Message-ID <qDTdM-4yA-7@gated-at.bofh.it> (permalink)
References <qDI8G-5O6-13@gated-at.bofh.it> <qDI8G-5O6-19@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

On Wed, Dec 09, 2015 at 10:18:10AM +0200, Peter Ujfalusi wrote:
> This change makes the DT file to be easier to read since the memcpy
> channels array does not need the '/bits/ 16' to be specified, which might
> confuse some people.

Why? I don't see the point of this change and plus you are breaking 
compatibility with the change. There was little reason to do 16-bit 
values to start with, but that's now the ABI.
 
Rob

> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  Documentation/devicetree/bindings/dma/ti-edma.txt |  5 ++---
>  drivers/dma/edma.c                                | 22 ++++++++++------------
>  include/linux/platform_data/edma.h                |  2 +-
>  3 files changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index d3d0a4fb1c73..ae8b8f1d6e69 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -22,8 +22,7 @@ Required properties:
>  Optional properties:
>  - ti,hwmods:	Name of the hwmods associated to the eDMA CC
>  - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
> -		these channels will be SW triggered channels. The list must
> -		contain 16 bits numbers, see example.
> +		these channels will be SW triggered channels. See example.
>  - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
>  		the driver, they are allocated to be used by for example the
>  		DSP. See example.
> @@ -56,7 +55,7 @@ edma: edma@49000000 {
>  	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
>  
>  	/* Channel 20 and 21 is allocated for memcpy */
> -	ti,edma-memcpy-channels = /bits/ 16 <20 21>;
> +	ti,edma-memcpy-channels = <20 21>;
>  	/* The following PaRAM slots are reserved: 35-45 and 100-110 */
>  	ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
>  				       /bits/ 16 <100 10>;
> diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
> index 2af8f32bba0b..89fc17f3a6ff 100644
> --- a/drivers/dma/edma.c
> +++ b/drivers/dma/edma.c
> @@ -1752,16 +1752,14 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
>  	return ret;
>  }
>  
> -static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
> +static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
>  {
> -	s16 *memcpy_ch = memcpy_channels;
> -
>  	if (!memcpy_channels)
>  		return false;
> -	while (*memcpy_ch != -1) {
> -		if (*memcpy_ch == ch_num)
> +	while (*memcpy_channels != -1) {
> +		if (*memcpy_channels == ch_num)
>  			return true;
> -		memcpy_ch++;
> +		memcpy_channels++;
>  	}
>  	return false;
>  }
> @@ -1775,7 +1773,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
>  {
>  	struct dma_device *s_ddev = &ecc->dma_slave;
>  	struct dma_device *m_ddev = NULL;
> -	s16 *memcpy_channels = ecc->info->memcpy_channels;
> +	s32 *memcpy_channels = ecc->info->memcpy_channels;
>  	int i, j;
>  
>  	dma_cap_zero(s_ddev->cap_mask);
> @@ -1996,16 +1994,16 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
>  	prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
>  	if (prop) {
>  		const char pname[] = "ti,edma-memcpy-channels";
> -		size_t nelm = sz / sizeof(s16);
> -		s16 *memcpy_ch;
> +		size_t nelm = sz / sizeof(s32);
> +		s32 *memcpy_ch;
>  
> -		memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
> +		memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
>  					 GFP_KERNEL);
>  		if (!memcpy_ch)
>  			return ERR_PTR(-ENOMEM);
>  
> -		ret = of_property_read_u16_array(dev->of_node, pname,
> -						 (u16 *)memcpy_ch, nelm);
> +		ret = of_property_read_u32_array(dev->of_node, pname,
> +						 (u32 *)memcpy_ch, nelm);
>  		if (ret)
>  			return ERR_PTR(ret);
>  
> diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
> index 105700e62ea1..0a533f94438f 100644
> --- a/include/linux/platform_data/edma.h
> +++ b/include/linux/platform_data/edma.h
> @@ -76,7 +76,7 @@ struct edma_soc_info {
>  	struct edma_rsv_info	*rsv;
>  
>  	/* List of channels allocated for memcpy, terminated with -1 */
> -	s16			*memcpy_channels;
> +	s32			*memcpy_channels;
>  
>  	s8	(*queue_priority_mapping)[2];
>  	const s16	(*xbar_chans)[2];
> -- 
> 2.6.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to 32bit Peter Ujfalusi <peter.ujfalusi@ti.com> - 2015-12-09 09:20 +0100
  [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Peter Ujfalusi <peter.ujfalusi@ti.com> - 2015-12-09 09:20 +0100
    Re: [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel  array from 16bit to 32bit type Rob Herring <robh@kernel.org> - 2015-12-09 21:10 +0100
      Re: [PATCH for 4.4 1/2] dmaengine: edma: DT: Change memcpy channel  array from 16bit to 32bit type Rob Herring <robh@kernel.org> - 2015-12-09 21:10 +0100
  Re: [PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to 32bit Arnd Bergmann <arnd@arndb.de> - 2015-12-09 10:10 +0100
  Re: [PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to  32bit Tony Lindgren <tony@atomide.com> - 2015-12-09 21:20 +0100
    Re: [PATCH for 4.4 0/2] DT/dmaengine: edma: Convert 16bit arrays to  32bit Vinod Koul <vinod.koul@intel.com> - 2015-12-10 04:10 +0100

csiph-web