Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1284980

Re: [PATCH v2 77/71] ncr5380: Fix wait for 53C80 registers registers after PDMA

Show all headers | View raw

On Mon, 7 Dec 2015, Ondrej Zary wrote:

> The check for 53C80 registers accessibility was commented out because
> it was broken (inverted). Fix and enable it.
> 
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
>  drivers/scsi/g_NCR5380.c |   37 ++++++-------------------------------
>  1 file changed, 6 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 038dddf..a7479c6 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -603,14 +603,10 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
>  	if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
>  		printk("53C400r: no 53C80 gated irq after transfer");
>  
> -#if 0
> -	/*
> -	 *	DON'T DO THIS - THEY NEVER ARRIVE!
> -	 */
> -	printk("53C400r: Waiting for 53C80 registers\n");
> -	while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
> +	/* wait for 53C80 registers to be available */
> +	while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
>  		;

In the previous patch, udelay(4) was added to a CSR_GATED_53C80_IRQ 
polling loop. It is interesting that you don't need it here when polling 
CSR_53C80_REG.

> -#endif
> +
>  	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
>  		printk(KERN_ERR "53C400r: no end dma signal\n");
>  		
> @@ -632,7 +628,6 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
>  	struct NCR5380_hostdata *hostdata = shost_priv(instance);
>  	int blocks = len / 128;
>  	int start = 0;
> -	int i;
>  
>  	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
>  	NCR5380_write(hostdata->c400_blk_cnt, blocks);
> @@ -681,36 +676,16 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
>  		blocks--;
>  	}
>  
> -#if 0
> -	printk("53C400w: waiting for registers to be available\n");
> -	THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
> -	printk("53C400w: Got em\n");
> -#endif
> -
> -	/* Let's wait for this instead - could be ugly */
> -	/* All documentation says to check for this. Maybe my hardware is too
> -	 * fast. Waiting for it seems to work fine! KLL
> -	 */
> -	while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) {
> +	/* wait for 53C80 registers to be available */
> +	while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
>  		udelay(4); /* DTC436 chip hangs without this */

... based on the above, this udelay is probably not needed.

(Or perhaps it is only needed once, in between the final host_buf register 
access and the first ctl_status access??)

Is there any reference in the docs to timing sensitivity?

>  		/* FIXME - no timeout */
>  	}
>  
> -	/*
> -	 * I know. i is certainly != 0 here but the loop is new. See previous
> -	 * comment.
> -	 */

Thanks for cleaning up this mess!

-- 

> -	if (i) {
> -		if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
> -			printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
> -	} else
> -		printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
> -
> -#if 0
>  	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
>  		printk(KERN_ERR "53C400w: no end dma signal\n");
>  	}
> -#endif
> +
>  	while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
>  		; 	// TIMEOUT
>  	return 0;
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 77/71] ncr5380: Fix wait for 53C80 registers registers after PDMA Ondrej Zary <linux@rainbow-software.org> - 2015-12-07 00:20 +0100
  Re: [PATCH v2 77/71] ncr5380: Fix wait for 53C80 registers registers  after PDMA Finn Thain <fthain@telegraphics.com.au> - 2015-12-07 04:20 +0100
    Re: [PATCH v2 77/71] ncr5380: Fix wait for 53C80 registers registers after PDMA Ondrej Zary <linux@rainbow-software.org> - 2015-12-07 09:10 +0100

csiph-web