Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1283242

Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled

From Nicolas Pitre <nico@fluxnic.net>
Newsgroups linux.kernel
Subject Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled
Date 2015-12-03 19:30 +0100
Message-ID <qBGNH-fM-3@gated-at.bofh.it> (permalink)
References (4 earlier) <qBARY-4KT-1@gated-at.bofh.it> <qBCh4-5K6-13@gated-at.bofh.it> <qBELU-7sA-1@gated-at.bofh.it> <qBFeW-7CN-25@gated-at.bofh.it> <qBFRE-879-9@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Thu, 3 Dec 2015, Russell King - ARM Linux wrote:

> On Thu, Dec 03, 2015 at 04:41:18PM +0000, Russell King - ARM Linux wrote:
> > On Thu, Dec 03, 2015 at 04:12:06PM +0000, Peter Rosin wrote:
> > > * uaccess_with_memcpy.c:__copy_to_user() has a mode in which it copies
> > >   "non-atomically" (if faulthandler_disabled() returns 0). If a fault
> > >   happens during __copy_to_user, what prevents some other thread from
> > >   clobbering DACR?
> > 
> > See the second point above.  Moreover, if we sleep in down_read(),
> > then __switch_to() reads the current DACR value and saves it in the
> > thread information, and will restore that value when resuming the
> > thread - even if the thread has been migrated to a different CPU.
> 
> I thought this was correct, but it isn't - that's what my original solution
> did, but I think when Will reviewed it, we decided it wasn't necessary -
> and it isn't necessary for every single case with the exception of this
> one.  This is exactly what's going wrong: the down_read() in these paths
> calls into the scheduler, which switches away.  When we come back, the
> DACR value is reset by the other thread to 0x51.
> 
> There's a few ways to solve this:
> 
> 1. Make the thread switching code save and restore the DACR register as
>    it would do for domains.  This imposes an overhead on every single
>    context switch whether or not we happen to be in this _single_
>    troublesome code.  (Patch attached - as there's several, I'm attaching
>    them.)
> 
> 2. Add additional code to the uaccess-with-memcpy stuff to reset the
>    DACR value prior to using memcpy() or memset().  (Patch attached.)
> 
> 3. Make uaccess-with-memcpy depend on !CPU_SW_DOMAINS_PAN (suggested by
>    Will)
> 
> 4. Delete the uaccess-with-memcpy code (also suggested by Will.)
> 
> I think the best thing I can do is say... "Discuss amongst yourselves" :)

Personally, I'd advocate for #2 or #4.  Prior commit 0f64b247e6 I was 
already leaning towards #4.

So if some people are still relying on uaccess-with-memcpy and #2 fixes 
it then it's all good.  I'd suggest surrounding the DACR accesses with 
#ifdef CONFIG_CPU_SW_DOMAIN_PAN in the final patch.


Nicolas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-03 09:40 +0100
  Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-03 12:10 +0100
    RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-03 12:50 +0100
      Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-03 13:00 +0100
        RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-03 13:10 +0100
          Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-03 14:40 +0100
            RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-03 17:20 +0100
              Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-03 17:50 +0100
                Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-03 18:30 +0100
                Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Nicolas Pitre <nico@fluxnic.net> - 2015-12-03 19:30 +0100
                Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-05 14:50 +0100
                RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-03 22:40 +0100
                Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-10 01:30 +0100
                RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-10 16:40 +0100
                Re: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-12-10 17:30 +0100
                RE: Domain faults when CONFIG_CPU_SW_DOMAIN_PAN is enabled Peter Rosin <peda@axentia.se> - 2015-12-10 19:40 +0100

csiph-web