Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1282963
| From | Sekhar Nori <nsekhar@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] irqchip: omap-intc: fix spurious irq handling |
| Date | 2015-12-03 12:30 +0100 |
| Message-ID | <qBAfh-4hh-35@gated-at.bofh.it> (permalink) |
| References | <qlfeO-xB-15@gated-at.bofh.it> <qlk4O-7Aj-23@gated-at.bofh.it> <qlyAN-3Ow-5@gated-at.bofh.it> <qlzGy-5pm-29@gated-at.bofh.it> <qlGym-6Uz-15@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Tony, On Tuesday 20 October 2015 08:22 PM, Tony Lindgren wrote: > * John Ogness <john.ogness@linutronix.de> [151020 00:33]: >> On 2015-10-20, Sekhar Nori <nsekhar@ti.com> wrote: >>>> Do you know what really is causing the spurious interrupts in your >>>> case? >>> >>> No, not yet. >> >> According to the TRM this is normal behavior if conditions that might >> affect priority are changed during priority sorting. >> >> 6.2.5 ARM A8 INTC Spurious Interrupt Handling >> >> The spurious flag indicates whether the result of the sorting (a >> window of 10 INTC functional clock cycles after the interrupt >> assertion) is invalid. The sorting is invalid if: >> >> - The interrupt that triggered the sorting is no longer active >> during the sorting. >> >> - A change in the mask has affected the result during the sorting >> time. >> >>>> In all the cases I've seen, the spurious interrupts were caused by a >>>> missing flush of posted write acking the IRQ at the device driver. >>>> for the _previously triggered_ INTC interrupt. >>>> >>>> If you have a reproducable case, I suggest you test that by printing >>>> out the previous interrupt to check if that makes sense. And then see >>>> if adding the missing read back to that interrupt handler fixes the >>>> issue. >>> >>> Okay, thats good to know. Thanks for the hints and history of your debug >>> on OMAP3. The issue is not easily reproducible in my case. But if I try >>> hard enough, I can get hit it though. So I can surely try your hints. >> >> I can reproduce the situation very easily. After running a test for a >> few minutes and printing out the previous interrupt, I have the >> following list. These are the irq numbers seen by the handler before the >> spurious interrupt triggered. >> >> INT12 - EDMACOMPINT - TPCC (EDMA) >> INT41 - 3PGSWRXINT0 - CPSW (Ethernet) >> INT42 - 3PGSWTXINT0 - CPSW (Ethernet) >> INT68 - TINT2 - DMTIMER2 >> INT72 - UART0INT - UART0 >> >> From this I do not think we can put the blame on any single driver. I >> trigger this situation very easily by putting a load of 7,000+ >> interrupts per second on the system. This means we have 70,000 INTC >> clock cycles per second where a change in the interrupt priority >> conditions would cause the priority sorting to become invalid and thus >> cause the spurious interrupt. >> >> I'm not sure if we can/should do anything more than Sekhar's patch of >> acknowledging the spurious interrupt so the priority sorting algorithm >> can run again. > > OK thanks for testing. My guess from the above list would be EDMA > or CPSW missing a flush of posted write. Maybe try adding a readback > of the related device revision register after acking the interrupt into > TPCC interrupt handler and CPSW interrupt handler(s)? I could get back to debugging this only now. I have converted __raw_writel to writel() and also added readback from the same register in both EDMA and CPSW drivers. But I am still able to reproduce the spurious irq reports. > The timer2 and uart0 seem to be false positives here naturally. I also added readback in 8250 driver. I haven't touched the timer driver, but I guess if that driver had an issue, it should have come out much earlier. I also saw that sometimes previous irq was the TI LCDC interrupt. Added readback there too. Did not help. > I would not yet rule out the "previous interrupt" theory until you have > tried that. We really want to know the root cause of the issue, just > printing out spurious interrupt does not fix the problem :) While we cannot rule out a software issue completely, the description in TRM around spurious interrupts suggests it can happen even with no role of software. May I suggest we go ahead and add this patch to the kernel after addressing Thomas's comment? At least it will prevent kernel from locking up with flood of prints when a spurious irq happens and allows easier debug by others too. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
Re: [PATCH] irqchip: omap-intc: fix spurious irq handling Sekhar Nori <nsekhar@ti.com> - 2015-12-03 12:30 +0100
Re: [PATCH] irqchip: omap-intc: fix spurious irq handling Tony Lindgren <tony@atomide.com> - 2015-12-03 16:10 +0100
Re: [PATCH] irqchip: omap-intc: fix spurious irq handling Sekhar Nori <nsekhar@ti.com> - 2015-12-03 16:30 +0100
Re: [PATCH] irqchip: omap-intc: fix spurious irq handling Tony Lindgren <tony@atomide.com> - 2015-12-03 16:40 +0100
csiph-web