Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1224284
| From | Arthur Marsh <arthur.marsh@internode.on.net> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver |
| Date | 2015-09-14 18:10 +0200 |
| Message-ID | <q8Eun-2He-37@gated-at.bofh.it> (permalink) |
| References | <q6T4t-3Lr-5@gated-at.bofh.it> <q8sjv-24u-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Jiang Liu wrote on 14/09/15 12:38: > Hi Authur, > As suggested by Bjorn, patch 1-2 set implement a PCI device > driver to manage eata PCI devices. And patch 3 tries to support PCI > device hot-removal for eata, but I have no change to test due to > limited knowledge about scsi subsystem and lacking of hardware for > tests. > So you could please help to test patch 1-2? Patch 3 is just > for comments. > Thanks! > Gerry > > Jiang Liu (3): > eata: Use IDA to manage eata board IDs > eata: Implement PCI driver to manage eata PCI devices > eata: Enhance eata driver to support PCI device hot-removal > > drivers/scsi/eata.c | 232 +++++++++++++++++++++++++++------------------------ > 1 file changed, 125 insertions(+), 107 deletions(-) > With patches 1 and 2 applied, I get a successful boot with IRQ mapping: [ 1.147056] EATA0: IRQ 10 mapped to IO-APIC IRQ 17. [ 1.160404] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio. [ 1.160469] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y. [ 1.160541] EATA0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64. [ 1.160600] EATA0: wide SCSI support enabled, max_id 16, max_lun 8. [ 1.160658] EATA0: SCSI channel 0 enabled, host target ID 7. [ 1.161207] scsi host0: EATA/DMA 2.0x rev. 8.10.00 but I still get errors when trying to do a kexec reboot, see http://www.users.on.net/~arthur.marsh/20150915547.jpg roughly it reads (after the synchronising SCSI cache reboot messages) and a long period of a dark screen: sd 0:0:6:0: abort, mbox 63. EATA0: abort, mbox 63 is in use. sd 0:0:6:0: reset, enter. EATA0: reset, mbox 63 in reset. EATA0: reset, board reset done, enabling interrupts. EATA0: reset, interrupts disabled, loops 100469. EATA0: reset, mbox 63 locked, DID_RESET, done. EATA0: reset, exit, done. sd 0:0:6:0: qcomm, mbox 0, adapter busy, will start sd 0:0:6:0: abort, mbox 0. EATA0: abort, timeout error. sd 0:0:6:0: reset, enter. EATA0: reset, exit, timeout error. sd 0:0:6:0 Device offlinled - not ready after error recovery sd 0:0:6:0 rejecting I/O to offline device sd 0:0:6:0 rejecting I/O to offline device sd 0:0:6:0 [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK starting new kernel It would be great if this problem could be fixed. Arthur. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-08 09:30 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-08 11:10 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-08 11:50 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Bjorn Helgaas <bhelgaas@google.com> - 2015-09-08 18:30 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-08 19:00 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Bjorn Helgaas <bhelgaas@google.com> - 2015-09-09 21:20 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-10 11:00 +0200
[Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 05:10 +0200
Re: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Hannes Reinecke <hare@suse.de> - 2015-09-14 10:30 +0200
Re: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 10:40 +0200
RE: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal "Ballabio, Dario" <dario.ballabio@emc.com> - 2015-09-14 10:40 +0200
Re: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Christoph Hellwig <hch@infradead.org> - 2015-09-16 15:50 +0200
Re: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-17 08:50 +0200
Re: [Bugfix 3/3] eata: Enhance eata driver to support PCI device hot-removal Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-18 17:10 +0200
[RFT v3] eata: Convert eata driver as normal PCI and platform device drivers Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-22 09:30 +0200
[Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 05:10 +0200
[Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 05:10 +0200
Re: [Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Hannes Reinecke <hare@suse.de> - 2015-09-14 10:20 +0200
Re: [Bugfix 2/3] eata: Implement PCI driver to manage eata PCI devices Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 10:40 +0200
[Bugfix 1/3] eata: Use IDA to manage eata board IDs Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-14 05:10 +0200
Re: [Bugfix 1/3] eata: Use IDA to manage eata board IDs Hannes Reinecke <hare@suse.de> - 2015-09-14 10:10 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-14 18:10 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-15 04:40 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-16 07:10 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-16 09:40 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Jiang Liu <jiang.liu@linux.intel.com> - 2015-09-16 10:30 +0200
Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-16 13:40 +0200
Re: [Bugfix] PCI, x86: Correctly allocate IRQs for PCI devices managed by non-PCI drivers Arthur Marsh <arthur.marsh@internode.on.net> - 2015-09-09 21:10 +0200
csiph-web