Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1220898

Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to bus clock

Show all headers | View raw

On Mon, Sep 7, 2015 at 1:18 PM, Vaibhav Hiremath
<vaibhav.hiremath@linaro.org> wrote:

> Different bus clock may need different pin setting.
> For example, fast bus clock like 208Mhz need pin drive fast
> while slow bus clock prefer pin drive slow to guarantee
> signal quality.
>
> So this patch creates two states,
>   - Default (slow/normal) pin state
>   - And fast pin state for higher freq bus speed.
>
> And selection of pin state is done based on timing mode.
>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> Signed-off-by: Kevin Liu <kliu5@marvell.com>
(...)
> +       pxa->pinctrl = devm_pinctrl_get(dev);
> +       if (!IS_ERR(pxa->pinctrl)) {
> +               pxa->pins_default = pinctrl_lookup_state(pxa->pinctrl, "default");
> +               if (IS_ERR(pxa->pins_default))
> +                       dev_err(dev, "could not get default pinstate\n");
> +               pxa->pins_fast = pinctrl_lookup_state(pxa->pinctrl, "fast");
> +               if (IS_ERR(pxa->pins_fast))
> +                       dev_info(dev, "could not get fast pinstate\n");
> +       }

This is exactly how I think it should be used from a pin control
point of view.

If you depended on CONFIG_PM you could use
pinctrl_pm_select_default_state() but for this simple scenario
this is fine.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
From a pinctrl point of view.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH-v2 0/7] mmc: sdhci-pxav3: Enable support for PXA1928 SDCHI controller Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:30 +0200
  [PATCH-v2 6/7] mmc: sdhci: add new quirk for setting BUS_POWER & BUS_VLT fields Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:30 +0200
  [PATCH-v2 7/7] mmc: sdhci: enable SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON for pxa1928 Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:30 +0200
  [PATCH-v2 1/7] mmc: sdhci-pxav3: Enable pxa1928 device support Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:30 +0200
  [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:30 +0200
    Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according  to bus clock Jisheng Zhang <jszhang@marvell.com> - 2015-09-08 09:00 +0200
      Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-08 12:00 +0200
    Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according  to bus clock Jisheng Zhang <jszhang@marvell.com> - 2015-09-08 09:00 +0200
      Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-08 11:40 +0200
        Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according  to bus clock Jisheng Zhang <jszhang@marvell.com> - 2015-09-08 12:00 +0200
          Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according  to bus clock Jisheng Zhang <jszhang@marvell.com> - 2015-09-08 12:10 +0200
            Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-08 14:20 +0200
          Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-08 12:10 +0200
    Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Linus Walleij <linus.walleij@linaro.org> - 2015-09-08 16:50 +0200
      Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-08 17:10 +0200
        Re: [PATCH-v2 4/7] mmc: sdhci-pxav3: Add pinctl setting according to  bus clock Linus Walleij <linus.walleij@linaro.org> - 2015-09-09 10:50 +0200

csiph-web