Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1217662
| From | Felipe Balbi <balbi@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts |
| Date | 2015-09-02 16:40 +0200 |
| Message-ID | <q4hmH-7PP-51@gated-at.bofh.it> (permalink) |
| References | <q4hcZ-7Er-3@gated-at.bofh.it> <q4hd0-7Er-31@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
[Multipart message — attachments visible in raw view] - view raw
On Wed, Sep 02, 2015 at 05:24:19PM +0300, Roger Quadros wrote:
> From: Felipe Balbi <balbi@ti.com>
>
> Add support to use interrupt names,
>
> Following are the interrupt names
>
> Peripheral Interrupt - peripheral
> HOST Interrupt - host
> OTG Interrupt - otg
>
> [Roger Q]
> - If any of these are missing we use the
> first available IRQ resource so that we don't
> break with older DTBs.
this is what original commit did:
commit ecd5f71cfd663bcd4efd2f29824acd8b2ba9715d
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Jan 3 13:49:38 2014 -0600
usb: dwc3: cleanup IRQ resources
In order to make it easier for the driver to
figure out which modes of operation it has,
and because some dwc3 integrations have rather
fuzzy IRQ routing, we now require three different
IRQ numbers (peripheral, host, otg).
In order to do that and maintain backwards compatibility,
we still maintain support for the old IRQ resource name,
but if you *really* want to have proper peripheral/host/otg
support, you should make sure your resources are correct.
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 60580a01cdd2..1f01031873b7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -556,10 +556,22 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
+ struct platform_device *pdev = to_platform_device(dev);
int ret;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
+ if (dwc->gadget_irq < 0) {
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+ if (dwc->gadget_irq < 0) {
+ dev_err(dev, "missing IRQ\n");
+ return dwc->gadget_irq;
+ } else {
+ dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+ }
+ }
+
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
@@ -568,6 +580,22 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_HOST:
+ dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
+ if (dwc->xhci_irq < 0) {
+ dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+ if (dwc->xhci_irq < 0) {
+ dev_err(dev, "missing Host IRQ\n");
+ return dwc->xhci_irq;
+ } else {
+ dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+ }
+
+ dwc->xhci_resources[1].start = dwc->xhci_irq;
+ dwc->xhci_resources[1].end = dwc->xhci_irq;
+ dwc->xhci_resources[1].flags = IORESOURCE_IRQ;
+ dwc->xhci_resources[1].name = "xhci";
+ }
+
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
ret = dwc3_host_init(dwc);
if (ret) {
@@ -576,6 +604,28 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_OTG:
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc3_peripheral");
+ if (dwc->gadget_irq < 0) {
+ dwc->gadget_irq = platform_get_irq_byname(pdev, "dwc_usb3");
+ if (dwc->gadget_irq < 0) {
+ dev_err(dev, "missing IRQ\n");
+ return dwc->gadget_irq;
+ } else {
+ dev_warn(dev, "dwc_usb3 resource is deprecated\n");
+ }
+
+ dwc->xhci_irq = dwc->gadget_irq;
+ dwc->otg_irq = dwc->gadget_irq;
+ } else {
+ dwc->xhci_irq = platform_get_irq_byname(pdev, "dwc3_host");
+ if (dwc->xhci_irq < 0) {
+ dev_err(dev, "missing Host IRQ\n");
+ return dwc->xhci_irq;
+ }
+
+ dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
+ }
+
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
ret = dwc3_otg_init(dwc);
if (ret) {
@@ -647,18 +697,6 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->mem = mem;
dwc->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "missing IRQ\n");
- return -ENODEV;
- }
- dwc->xhci_resources[1].start = res->start;
- dwc->xhci_resources[1].end = res->end;
- dwc->xhci_resources[1].flags = res->flags;
- dwc->xhci_resources[1].name = res->name;
-
- dwc->otg_irq = platform_get_irq_byname(pdev, "dwc3_otg");
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "missing memory resource\n");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 8e2e579b4b1e..0b02186fad6f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -671,6 +671,8 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @gadget_irq: IRQ number for Peripheral IRQs
+ * @xhci_irq: IRQ number for Host IRQs
* @otg_irq: IRQ number for OTG IRQs
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
@@ -747,6 +749,8 @@ struct dwc3 {
enum usb_dr_mode dr_mode;
+ int gadget_irq;
+ int xhci_irq;
int otg_irq;
/* used for suspend/resume */
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a8cf87b3de01..2a6e5155fc89 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1567,15 +1567,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
struct dwc3_ep *dep;
unsigned long flags;
int ret = 0;
- int irq;
u32 reg;
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
- ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
- IRQF_SHARED, "dwc3", dwc);
+ ret = request_threaded_irq(dwc->gadget_irq, dwc3_interrupt,
+ dwc3_thread_interrupt, IRQF_SHARED, "dwc3", dwc);
if (ret) {
dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
- irq, ret);
+ dwc->gadget_irq, ret);
goto err0;
}
@@ -1668,7 +1666,7 @@ err2:
err1:
spin_unlock_irqrestore(&dwc->lock, flags);
- free_irq(irq, dwc);
+ free_irq(dwc->gadget_irq, dwc);
err0:
return ret;
@@ -1679,7 +1677,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
{
struct dwc3 *dwc = gadget_to_dwc(g);
unsigned long flags;
- int irq;
spin_lock_irqsave(&dwc->lock, flags);
@@ -1691,8 +1688,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
spin_unlock_irqrestore(&dwc->lock, flags);
- irq = platform_get_irq(to_platform_device(dwc->dev), 0);
- free_irq(irq, dwc);
+ free_irq(dwc->gadget_irq, dwc);
return 0;
}
>
> - Use gadget_irq in gadget driver.
>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/usb/dwc3/core.c | 12 ++++++++++++
> drivers/usb/dwc3/core.h | 7 +++++++
> drivers/usb/dwc3/gadget.c | 2 +-
> 3 files changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 2e36a9b..38b31df 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -958,6 +958,18 @@ static int dwc3_probe(struct platform_device *pdev)
> dwc->xhci_resources[1].flags = res->flags;
> dwc->xhci_resources[1].name = res->name;
>
> + dwc->otg_irq = platform_get_irq_byname(pdev, "otg");
> + if (dwc->otg_irq < 0)
> + dwc->otg_irq = res->start;
> +
> + dwc->gadget_irq = platform_get_irq_byname(pdev, "peripheral");
> + if (dwc->gadget_irq < 0)
> + dwc->gadget_irq = res->start;
> +
> + dwc->xhci_irq = platform_get_irq_byname(pdev, "host");
> + if (dwc->xhci_irq < 0)
> + dwc->xhci_irq = res->start;
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res) {
> dev_err(dev, "missing memory resource\n");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 4b85330..bd32cb2 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -742,6 +742,9 @@ struct dwc3_scratchpad_array {
> * @maximum_speed: maximum speed requested (mainly for testing purposes)
> * @revision: revision register contents
> * @dr_mode: requested mode of operation
> + * @xhci_irq: IRQ number for XHCI IRQs
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @otg_irq: IRQ number for OTG IRQs
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> * @usb2_generic_phy: pointer to USB2 PHY
> @@ -847,6 +850,10 @@ struct dwc3 {
>
> enum usb_dr_mode dr_mode;
>
> + int gadget_irq;
> + int xhci_irq;
> + int otg_irq;
> +
> /* used for suspend/resume */
> u32 dcfg;
> u32 gctl;
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 0c25704..1148ec8 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1533,7 +1533,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
> int irq;
> u32 reg;
>
> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> + irq = dwc->gadget_irq;
> ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
> IRQF_SHARED, "dwc3", dwc);
> if (ret) {
> --
> 2.1.4
>
--
balbi
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v4 0/9] usb: dwc3: add dual-role support Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
[PATCH v4 1/9] usb: dwc3: add dual-role support Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 1/9] usb: dwc3: add dual-role support Felipe Balbi <balbi@ti.com> - 2015-09-02 16:40 +0200
Re: [PATCH v4 1/9] usb: dwc3: add dual-role support Roger Quadros <rogerq@ti.com> - 2015-09-03 14:30 +0200
Re: [PATCH v4 1/9] usb: dwc3: add dual-role support Felipe Balbi <balbi@ti.com> - 2015-09-03 18:10 +0200
Re: [PATCH v4 1/9] usb: dwc3: add dual-role support Roger Quadros <rogerq@ti.com> - 2015-09-04 11:10 +0200
[PATCH v4 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Felipe Balbi <balbi@ti.com> - 2015-09-02 16:50 +0200
Re: [PATCH v4 6/9] usb: dwc3: save/restore OTG registers during suspend/resume Roger Quadros <rogerq@ti.com> - 2015-09-03 16:00 +0200
[PATCH v4 3/9] usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 3/9] usb: dwc3: dwc3-omap: Make the wrapper interrupt shared Felipe Balbi <balbi@ti.com> - 2015-09-02 16:40 +0200
[PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Felipe Balbi <balbi@ti.com> - 2015-09-02 16:50 +0200
Re: [PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros <rogerq@ti.com> - 2015-09-03 16:00 +0200
Re: [PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Felipe Balbi <balbi@ti.com> - 2015-09-03 18:00 +0200
Re: [PATCH v4 5/9] usb: dwc3: core: make dual-role work with OTG irq Roger Quadros <rogerq@ti.com> - 2015-09-04 11:20 +0200
[PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Felipe Balbi <balbi@ti.com> - 2015-09-02 16:50 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros <rogerq@ti.com> - 2015-09-03 16:10 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2015-09-02 19:30 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2015-09-03 16:10 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2015-09-03 16:20 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros <rogerq@ti.com> - 2015-09-03 16:20 +0200
Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role Roger Quadros <rogerq@ti.com> - 2015-09-03 16:10 +0200
[PATCH v4 2/9] usb: dwc3: core.h: add some register definitions Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
[PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Roger Quadros <rogerq@ti.com> - 2015-09-02 16:30 +0200
Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Felipe Balbi <balbi@ti.com> - 2015-09-02 16:40 +0200
Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Roger Quadros <rogerq@ti.com> - 2015-09-03 14:50 +0200
Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Felipe Balbi <balbi@ti.com> - 2015-09-03 18:00 +0200
Re: [PATCH v4 4/9] usb: dwc3: core: Adapt to named interrupts Roger Quadros <rogerq@ti.com> - 2015-09-04 11:20 +0200
csiph-web