Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1218793
| From | kernel@martin.sperl.org |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v5 2/6] ARM: bcm2835: add DT for the bcm2835 auxiliar devices |
| Date | 2015-09-04 11:50 +0200 |
| Message-ID | <q4VN8-6Mk-7@gated-at.bofh.it> (permalink) |
| References | <q4VN8-6Mk-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
From: Martin Sperl <kernel@martin.sperl.org>
Add device tree definitions for auxiliar bcm2835 devices:
* spi1
* spi2
* uart1
This also include a device to get used by the relevant
device-drivers (via a shared register) to enable/disable
the HW-block.
The aux-interrupt-register (0x7e21500) is intentionally left
out of scope, so that in the future it is still possible to
implement a separate interrupt-driver - if deemed necessary.
The spi (and also uart) drivers are able to use shared interrupts,
so there is no real need for an interrupt driver.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
---
arch/arm/boot/dts/bcm2835.dtsi | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f..4e6fc61 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -158,6 +158,43 @@
arm-pmu {
compatible = "arm,arm1176-pmu";
};
+
+ aux_enable: aux_enable@0x7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ reg = <0x7e215004 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart1: uart@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <1 29>;
+ brcm,aux-enable = <&aux_enable 1>;
+ status = "disabled";
+ };
+
+ spi1: spi@7e215080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ brcm,aux-enable = <&aux_enable 2>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@7e2150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ brcm,aux-enable = <&aux_enable 4>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
clocks {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
[PATCH v5 2/6] ARM: bcm2835: add DT for the bcm2835 auxiliar devices kernel@martin.sperl.org - 2015-09-04 11:50 +0200
csiph-web