Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1217173

Re: [PATCH] net/bonding: send arp in interval if no active slave

Show all headers | View raw

On Tue, 01.09.2015 at 00:21 +0200 Jarod Wilson wrote:
> On 2015-08-17 4:51 PM, Uwe Koziolek wrote:
>> On Mon, Aug 17, 2015 at 09:14PM +0200, Jay Vosburgh wrote:
>>> Uwe Koziolek <uwe.koziolek@redknee.com> wrote:
>>>
>>>> On2015-08-17 07:12 PM,Jarod Wilson wrote:
> ...
>>>>> Uwe, can you perhaps further enlighten us as to what num_grat_arp
>>>>> settings were tried that didn't help? I'm still of the mind that if
>>>>> num_grat_arp *didn't* help, we probably need to do something keyed 
>>>>> off
>>>>> num_grat_arp.
>>>> The bonding slaves are connected to high available switches, each 
>>>> of the
>>>> slaves is connected to a different switch. If the bond is starting, 
>>>> only
>>>> the selected slave sends one arp-request. If a matching 
>>>> arp_response was
>>>> received, this slave and the bond is going into state up, sending the
>>>> gratitious arps...
>>>> But if you got no arp reply the next slave was selected.
>>>> With most of the newer switches, not overloaded, or with other 
>>>> software
>>>> bugs, or with a single switch configuration, you would get a arp
>>>> response
>>>> on the first arp request.
>>>> But in case of high availability configuration with non perfect 
>>>> switches
>>>> like HP ProCurve 54xx, also with some Cisco models, you may not get a
>>>> response on the first arp request.
>>>>
>>>> I have seen network snoops, there the switches are not responding 
>>>> to the
>>>> first arp request on slave 1, the second arp request was sent on 
>>>> slave 2
>>>> but the response was received on slave one,  and all following arp
>>>> requests are anwsered on the wrong slave for a longer time.
>>>     Could you elaborate on the exact "high availability
>>> configuration" here, including the model(s) of switch(es) involved?
>>>
>>>     Is this some kind of race between the switch or switches
>>> updating the forwarding tables and the bond flip flopping between the
>>> slaves?  E.g., source MAC from ARP sent on slave 1 is used to populate
>>> the forwarding table, but (for whatever reason) there is no reply.  ARP
>>> on slave 2 is sent (using the same source MAC, unless you set
>>> fail_over_mac), but forwarding tables still send that MAC to slave 
>>> 1, so
>>> reply is sent there.
>> High availability:
>> 2 managed switches with routing capabilities have an interconnect.
>> One slave of a bonding interface is connected to the first switch, the
>> second slave is connected to the other switch.
>> The switch models are HP ProCurve 5406 and HP ProCurve 5412. As far as i
>> remember also HP E 3500 and  E 3800 are also
>> affected, for the affected Cisco models I can't answer today.
>> Affected single switch configurations was not seen.
>>
>> Yes, race conditions with delayed upgrades of the forwarding tables is a
>> well matching explanation for the problem.
>>
>>>> The proposed change sents up to 3 arp requests on a down bond using 
>>>> the
>>>> same slave, delayed by arp_interval.
>>>> Using problematic switches i have seen the the arp response on the 
>>>> right
>>>> slave at latest on the second arp request. So the bond is going into
>>>> state
>>>> up.
>>>>
>>>> How does it works:
>>>> The bonds in up state are handled on the beginning of 
>>>> bond_ab_arp_probe
>>>> procedure, the other part of this procedure is handling the slave
>>>> change.
>>>> The proposed change is bypassing the slave change for 2 additional 
>>>> calls
>>>> of bond_ab_arp_probe.
>>>> Now the retries are not only for an up bond available, they are also
>>>> implemented for a down bond.
>>>     Does this delay failover or bringup on switches that are not
>>> "problematic"?  I.e., if arp_interval is, say, 1000 (1 second), will
>>> this impact failover / recovery times?
>>>
>>>     -J
>> It depends.
>> failover times are not impacted, this is handled different.
>> Only the transition from a down bonding interface (bond and all slaves
>> are down) to the state up can be increased by up to 2 times 
>> arp_interval,
>> If the selected interface did not came up .If well working switches are
>> used, and everything other is also ok, there are no impacts.
>
> Jay, any further thoughts on this given Uwe's reply? Uwe, did you have 
> a chance to get affected Cisco model numbers too?
>
The affected Cisco model was a C3750.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH] net/bonding: send arp in interval if no active slave Jarod Wilson <jarod@redhat.com> - 2015-09-01 00:30 +0200
  Re: [PATCH] net/bonding: send arp in interval if no active slave Uwe Koziolek <uwe.koziolek@redknee.com> - 2015-09-02 01:40 +0200

csiph-web