Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1216143

Re: [PATCH 05/11] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory

Show all headers | View raw

On 08.06.2015 17:14, Lorenzo Pieralisi wrote:
> On Mon, Jun 08, 2015 at 03:57:38AM +0100, Hanjun Guo wrote:
>
> [...]
>
>>>>>>>> Why can't we make use of the ECAM implementation used by
>>>>>>>> pci-host-generic
>>>>>>>> and drivers/pci/access.c?
>>>>>>>
>>>>>>> We had that question when I had posted MMCFG patch set separately,
>>>>>>> please see:
>>>>>>> https://lkml.org/lkml/2015/3/11/492
>>>>>>
>>>>>> Yes, but the real question is, why do we need to have PCI config space
>>>>>> up and running before a bus struct is even created ? I think the
>>>>>> reason is
>>>>>> the PCI configuration address space format (ACPI 6.0, Table 5-27, page
>>>>>> 108):
>>>>>>
>>>>>> "PCI Configuration space addresses must be confined to devices on
>>>>>> PCI Segment Group 0, bus 0. This restriction exists to accommodate
>>>>>> access to fixed hardware prior to PCI bus enumeration".
>>>>>>
>>>>>> On HW reduced platforms I do not even think this is required at all,
>>>>>> we have to look into this to avoid code duplication that might well
>>>>>> turn out useless.
>>>>>
>>>>> This is only for the fixed hardware, which will be not available for
>>>>> ARM64 (reduced hardware mode), but in Generic Hardware Programming
>>>>> Model, we using OEM-provided ACPI Machine Language (AML) code to access
>>>>> generic hardware registers, this will be available for reduced hardware
>>>>> too.
>>>>>
>>>>> So in ACPI spec, it says: (ACPI 6.0 page 66, last paragraph)
>>>>>
>>>>> ACPI defines eight address spaces that may be accessed by generic
>>>>> hardware implementations. These include:
>>>>> * System I/O space
>>>>> * System memory space
>>>>> * PCI configuration space
>>>>> * Embedded controller space
>>>>> * System Management Bus (SMBus) space
>>>>> * CMOS
>>>>> * PCI BAR Target
>>>>> * IPMI space
>>>>>
>>>>> So if any device using the PCI address space for control, such
>>>>> as a system reset control device, its address space can be reside
>>>>> in PCI configuration space (who can prevent a OEM do that crazy
>>>>> thing? :) ), and it should be accessible before the PCI bus is
>>>>> created.
>>>>
>>>> Us, by changing attitude and questioning features whose usefulness
>>>> is questionable. I will look into this and raise the point, I am not
>>>> thrilled by the idea of adding another set of PCI accessor functions
>>>> and drivers because we have to access a register through PCI before
>>>> enumerating the bus (and on arm64 this is totally useless since
>>>> we are not meant to support fixed HW anyway). Maybe we can make acpica
>>>> code use a "special" stub (ACPI specific, PCI configuration space address
>>>> space has restrictions anyway), I have to review this set in its
>>>> entirety to see how to do that (and I would kindly ask you to do
>>>> it too, before saying it is not possible to implement it).
>>>
>>> I'm willing to do that, actually, if we don't need a mechanism to
>>> access PCI config space before the bus is created, the code can be
>>> simplified a lot.
>>
>> After more investigation on the spec and the ACPI core code, I'm
>> still not convinced that accessing to PCI config space before PCI
>> bus creating is impossible, also there is no enough ARM64 hardware
>> to prove that too. But I think we can go in this way, reuse the
>> ECAM implementation by pci-host-generic for now, and implement the PCI
>> accessor functions before enumerating PCI bus when needed in the
>> future, does it make sense?
>
> You mean we rewrite the patch to make sure we can use the PCI host generic
> driver with MCFG and we leave the acpica PCI config call empty stubs on
> arm64 (as they are now) ?
>

Hi Bjorn, Rafael,

Lorenzo pointed out very important problem we are having with PCI config 
space access for ARM64. Please refer to the above discussion and add 
your 2 cents. Can we forget about accessing PCI config space (for 
Hardware Reduced profile) before PCI bus creation? If not, do you see a 
way to use drivers/pci/access.c accessors here, like acpica change? Any 
opinion is very appreciated.

Regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 05/11] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka  ECAM) and ACPI code out of arch/x86/ directory Tomasz Nowicki <tomasz.nowicki@linaro.org> - 2015-08-31 13:10 +0200

csiph-web