Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1216682

Re: [PATCH V3] perf: x86: Improve accuracy of perf/sched clock

Show all headers | View raw

On 21/08/15 12:05, Adrian Hunter wrote:
> When TSC is stable perf/sched clock is based on it.
> However the conversion from cycles to nanoseconds
> is not as accurate as it could be.  Because
> CYC2NS_SCALE_FACTOR is 10, the accuracy is +/- 1/2048
> 
> The change is to calculate the maximum shift that
> results in a multiplier that is still a 32-bit number.
> For example all frequencies over 1 GHz will have
> a shift of 32, making the accuracy of the conversion
> +/- 1/(2^33).  That is achieved by using the
> 'clocks_calc_mult_shift()' function.
> 
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>

Ping?

> ---
> 
> 
> Changes in V3:
> 
> 	Use clocks_calc_mult_shift() instead of open-coded
> 	calculation
> 
> Changes in V2:
> 
> 	Remove definition of CYC2NS_SCALE_FACTOR
> 	Amend comments
> 
> 
>  arch/x86/kernel/tsc.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> index c8d52cb4cb6e..39ec3d07affd 100644
> --- a/arch/x86/kernel/tsc.c
> +++ b/arch/x86/kernel/tsc.c
> @@ -167,21 +167,20 @@ static void cyc2ns_write_end(int cpu, struct cyc2ns_data *data)
>   *              ns = cycles * cyc2ns_scale / SC
>   *
>   *      And since SC is a constant power of two, we can convert the div
> - *  into a shift.
> + *  into a shift. The larger SC is, the more accurate the conversion, but
> + *  cyc2ns_scale needs to be a 32-bit value so that 32-bit multiplication
> + *  (64-bit result) can be used.
>   *
> - *  We can use khz divisor instead of mhz to keep a better precision, since
> - *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
> + *  We can use khz divisor instead of mhz to keep a better precision.
>   *  (mathieu.desnoyers@polymtl.ca)
>   *
>   *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
>   */
>  
> -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
> -
>  static void cyc2ns_data_init(struct cyc2ns_data *data)
>  {
>  	data->cyc2ns_mul = 0;
> -	data->cyc2ns_shift = CYC2NS_SCALE_FACTOR;
> +	data->cyc2ns_shift = 0;
>  	data->cyc2ns_offset = 0;
>  	data->__count = 0;
>  }
> @@ -215,14 +214,14 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
>  
>  	if (likely(data == tail)) {
>  		ns = data->cyc2ns_offset;
> -		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
> +		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, data->cyc2ns_shift);
>  	} else {
>  		data->__count++;
>  
>  		barrier();
>  
>  		ns = data->cyc2ns_offset;
> -		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
> +		ns += mul_u64_u32_shr(cyc, data->cyc2ns_mul, data->cyc2ns_shift);
>  
>  		barrier();
>  
> @@ -256,12 +255,11 @@ static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
>  	 * time function is continuous; see the comment near struct
>  	 * cyc2ns_data.
>  	 */
> -	data->cyc2ns_mul =
> -		DIV_ROUND_CLOSEST(NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR,
> -				  cpu_khz);
> -	data->cyc2ns_shift = CYC2NS_SCALE_FACTOR;
> +	clocks_calc_mult_shift(&data->cyc2ns_mul, &data->cyc2ns_shift, cpu_khz,
> +			       NSEC_PER_MSEC, 0);
> +
>  	data->cyc2ns_offset = ns_now -
> -		mul_u64_u32_shr(tsc_now, data->cyc2ns_mul, CYC2NS_SCALE_FACTOR);
> +		mul_u64_u32_shr(tsc_now, data->cyc2ns_mul, data->cyc2ns_shift);
>  
>  	cyc2ns_write_end(cpu, data);
>  
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH V2] perf: x86: Improve accuracy of perf/sched clock Thomas Gleixner <tglx@linutronix.de> - 2015-08-20 21:40 +0200
  Re: [PATCH V2] perf: x86: Improve accuracy of perf/sched clock Adrian Hunter <adrian.hunter@intel.com> - 2015-08-21 08:50 +0200
    [PATCH V3] perf: x86: Improve accuracy of perf/sched clock Adrian Hunter <adrian.hunter@intel.com> - 2015-08-21 11:10 +0200
      Re: [PATCH V3] perf: x86: Improve accuracy of perf/sched clock Adrian Hunter <adrian.hunter@intel.com> - 2015-09-01 10:40 +0200
        Re: [PATCH V3] perf: x86: Improve accuracy of perf/sched clock Peter Zijlstra <peterz@infradead.org> - 2015-09-01 11:00 +0200

csiph-web