Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1215736

Re: [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume support

Show all headers | View raw

On Fri, 28 Aug 2015, Han Xu wrote:

> From: Huang Shijie <b32955@freescale.com>
> 
> i.MX6SX supports deep sleep mode(DSM) that may turn off GPMI/BCH power
> during suspend, add gpmi nand suspend/resume function to release DMA
> channel in suspend function and re-init GPMI/BCH controller during
> resume function.
>

Just a question regarding gpmi_pm_resume() errror reporting
Is there a reason that the retrun value of gpmi_extra_init() is not checked ?
gpmi_extra_init() can retrun -ENOMEM or -EINVAL via return enable_edo_mode(),
while the -EINVAL would produce a dev_err message, -ENOMEM does not so maybe
this also wants to include a if(ret) {...} ? - something like the below
 
> Although it is not necessary to restore GPMI/BCH registers value for
> i.MX6QDL, the code doesn't distinguish different platforms to keep the
> code simple.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>
> Signed-off-by: Han Xu <han.xu@freescale.com>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 45 +++++++++++++++++++++++++++++++++-
>  1 file changed, 44 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 1b8f350..dfd0ba1 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1,7 +1,7 @@
>  /*
>   * Freescale GPMI NAND Flash Driver
>   *
> - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
> + * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
>   * Copyright (C) 2008 Embedded Alley Solutions, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -2036,9 +2036,52 @@ static int gpmi_nand_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static int gpmi_pm_suspend(struct device *dev)
> +{
> +	struct gpmi_nand_data *this = dev_get_drvdata(dev);
> +
> +	release_dma_channels(this);
> +	return 0;
> +}
> +
> +static int gpmi_pm_resume(struct device *dev)
> +{
> +	struct gpmi_nand_data *this = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = acquire_dma_channels(this);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* re-init the GPMI registers */
> +	this->flags &= ~GPMI_TIMING_INIT_OK;
> +	ret = gpmi_init(this);
> +	if (ret) {
> +		dev_err(this->dev, "Error setting GPMI : %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* re-init the BCH registers */
> +	ret = bch_set_geometry(this);
> +	if (ret) {
> +		dev_err(this->dev, "Error setting BCH : %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* re-init others */
> +	gpmi_extra_init(this);

report failure of enable_edo_mode() ?

	if (ret) {
		dev_err(this->dev, "Error enabling EDO mode : %d\n", ret);
		return ret;
	}

> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops gpmi_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
> +};
> +
>  static struct platform_driver gpmi_nand_driver = {
>  	.driver = {
>  		.name = "gpmi-nand",
> +		.pm = &gpmi_pm_ops,
>  		.of_match_table = gpmi_nand_id_table,
>  	},
>  	.probe   = gpmi_nand_probe,
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume  support Nicholas Mc Guire <der.herr@hofr.at> - 2015-08-29 11:20 +0200
  Re: [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume  support Huang Shijie <shijie.huang@arm.com> - 2015-09-01 10:20 +0200

csiph-web