Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1211857

Re: [PATCH v3 1/1] USB:option:add ZTE PIDs

Show all headers | View raw

On Wed, Aug 19, 2015 at 08:51:17AM -0700, Liu.Zhao wrote:
> 
> This is intended to add ZTE device PIDs on kernel.
> 
> 
> 
> Signed-off-by: Liu.Zhao <lzsos369@163.com>
> ---
>  drivers/usb/serial/option.c | 36 ++++++++++++++++++++++++++++--------
>  1 file changed, 28 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 876423b..e26db28 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -278,13 +278,17 @@ static void option_instat_callback(struct urb *urb);
>  #define ZTE_PRODUCT_MF622			0x0001
>  #define ZTE_PRODUCT_MF628			0x0015
>  #define ZTE_PRODUCT_MF626			0x0031
> -#define ZTE_PRODUCT_AC2726			0xfff1
> -#define ZTE_PRODUCT_MG880			0xfffd
> -#define ZTE_PRODUCT_CDMA_TECH			0xfffe
> -#define ZTE_PRODUCT_AC8710T			0xffff
> +#define ZTE_PRODUCT_ZM8620_X	        	0x0396
> +#define ZTE_PRODUCT_ME3620_MBIM	        	0x0426
> +#define ZTE_PRODUCT_ME3620_X	        	0x1432
> +#define ZTE_PRODUCT_ME3620_L	        	0x1433
>  #define ZTE_PRODUCT_MC2718			0xffe8
>  #define ZTE_PRODUCT_AD3812			0xffeb
>  #define ZTE_PRODUCT_MC2716			0xffed
> +#define ZTE_PRODUCT_AC2726			0xfff1
> +#define ZTE_PRODUCT_MG880			0xfffd
> +#define ZTE_PRODUCT_CDMA_TECH	        	0xfffe
> +#define ZTE_PRODUCT_AC8710T			0xffff

Reordering the current entries is not needed, but if you do it then you
must mention it in the commit message above.

Also make sure to not change any formatting; checkpatch is now
complaining about whitespace issues (always run checkpatch before
submitting).

>  #define BENQ_VENDOR_ID				0x04a5
>  #define BENQ_PRODUCT_H10			0x4068
> @@ -544,6 +548,14 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = {
>  	.sendsetup = BIT(1) | BIT(2) | BIT(3),
>  };
>  
> +static const struct option_blacklist_info zte_me3620andzm8620_xl_blacklist = {
> +	.reserved = BIT(3) | BIT(4) | BIT(5),
> +};

Use two structs for this: zte_me3620_blacklist and zm8620_xl_blacklist
even if they reserve the same ports.

> +
> +static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
> +	.reserved = BIT(2) | BIT(3) | BIT(4),
> +};
> +
>  static const struct option_blacklist_info huawei_cdc12_blacklist = {
>  	.reserved = BIT(1) | BIT(2),
>  };
> @@ -1581,16 +1593,24 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
> -	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
> -	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
> -	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
> -	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
>  	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
>  	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
> +	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
> +	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
> +	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
> +	 .driver_info = (kernel_ulong_t)&zte_me3620andzm8620_xl_blacklist },
> +	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
> +	 .driver_info = (kernel_ulong_t)&zte_me3620andzm8620_xl_blacklist },
> +	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
> +	 .driver_info = (kernel_ulong_t)&zte_me3620andzm8620_xl_blacklist },
> +	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
> +	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },

If really want to reorder the current entries, then at least make sure
the end result is indeed sorted.

>  	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
>  	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
>  	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },

Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v3 1/1] USB:option:add ZTE PIDs Johan Hovold <johan@kernel.org> - 2015-08-24 09:30 +0200
  Re: [PATCH v3 1/1] USB:option:add ZTE PIDs Bjørn Mork <bjorn@mork.no> - 2015-08-24 10:00 +0200
    Re: [PATCH v3 1/1] USB:option:add ZTE PIDs Johan Hovold <johan@kernel.org> - 2015-08-24 14:40 +0200

csiph-web