Re: [PATCH] ath3k: Add support of 0489:e076 AR3012 device

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Dmitry Tunin <hanipouspilot@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH] ath3k: Add support of 0489:e076 AR3012 device
Date	Sat, 06 Jun 2015 22:40:01 +0200
Message-ID	<pyt2N-2DV-5@gated-at.bofh.it> (permalink)
References	<pyq4V-6LY-11@gated-at.bofh.it>
X-Original-To	Marcel Holtmann <marcel@holtmann.org>, Gustavo Padovan <gustavo@padovan.org>, Johan Hedberg <johan.hedberg@gmail.com>
Dkim-Signature	v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type:content-transfer-encoding; bh=rc09o5TerxlFauE4qrr9gQsrSh6w9jvbTJlKNI1Rkww=; b=D+Cv/r1XYKg22ZDy4M3tpoUXfbJXxQJIi5aoJ9pmb6Xn4n5qrrp8fQ5KqNKStkTiJE 0Ldl6xbQHAMNgw4D+tQiGcrP4kMTX5Ru2Nof/LHqdMDC98H7EBgo8XlPhoerl91t2npc FLPNeScCGFIf9vXzHgdU6q64Zo9JAnWht9BkcGBtWKLwFgqNB7q8nNXscPhJ5isO441Q MYDPx0Gk7IaNNy+62DRdVyMEh8U2ZeiqfBHGmpQumyOVSmRM/0o1xO5rgxTq7zhr4T3E ElgPFEzwXMx8mPvvb52klwyjX8Uqin5oxJCI1UilMA+dIstm1nEuL7iBDpjmg3kXFBCx +MAA==
X-Received	by 10.152.18.163 with SMTP id x3mr9121207lad.70.1433622788337; Sat, 06 Jun 2015 13:33:08 -0700 (PDT)
User-Agent	Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
MIME-Version	1.0
Content-Type	text/plain; charset=windows-1251; format=flowed
Content-Transfer-Encoding	8bit
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	111
Organization	linux.* mail to news gateway
X-Original-Cc	linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org
X-Original-Date	Sat, 06 Jun 2015 23:33:05 +0300
X-Original-Message-ID	<55735901.9050303@gmail.com>
X-Original-References	<1433611540-30860-1-git-send-email-hanipouspilot@gmail.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	aioe.org linux.kernel:1159947

Show key headers only | View raw


06.06.2015 20:25, Dmitry Tunin пишет:
> BugLink: https://bugs.launchpad.net/bugs/1462614
>
> This device requires new firmware files
>   AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to
> /lib/firmware/ar3k/ that are not included in linux-firmware yet.
>
> T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e076 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
>   drivers/bluetooth/ath3k.c | 2 ++
>   drivers/bluetooth/btusb.c | 1 +
>   2 files changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 8c81af6..ee64764 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
>   	{ USB_DEVICE(0x0489, 0xe057) },
>   	{ USB_DEVICE(0x0489, 0xe056) },
>   	{ USB_DEVICE(0x0489, 0xe05f) },
> +	{ USB_DEVICE(0x0489, 0xe076) },
>   	{ USB_DEVICE(0x0489, 0xe078) },
>   	{ USB_DEVICE(0x04c5, 0x1330) },
>   	{ USB_DEVICE(0x04CA, 0x3004) },
> @@ -137,6 +138,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
>   	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
> +	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 94c6c04..c9be776 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -179,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = {
>   	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
> +	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
>   	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
I added /sys/kernel/debug/usb/devices when firmware was not loaded.
When I added firmware files it shows

T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=05 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e076 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Shall I change the commit message, or is it OK?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH] ath3k: Add support of 0489:e076 AR3012 device Dmitry Tunin <hanipouspilot@gmail.com> - 2015-06-06 22:40 +0200

csiph-web