Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1210976

Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support

Show key headers only | View raw

On 2015/8/21 15:38, Jaehoon Chung wrote:
> On 08/21/2015 04:27 PM, Shawn Lin wrote:
>> On 2015/8/21 14:35, Jaehoon Chung wrote:
>>> On 08/21/2015 03:30 PM, Shawn Lin wrote:
>>>> On 2015/8/21 14:27, Jaehoon Chung wrote:
>>>>> Hi, Shawn.
>>>>>
>>>>> Is this based on Ulf's repository?
>>>>
>>>>
>>>> no, it's based on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" ：）
>>>
>>> Oh..I will rebase to Ulf's next branch on this weekend.
>>> Then could you rebase this patch? And i added more comments at below.. :)
>>>
>>
>> Okay, I will rebase to Ulf's next.
>>
>>> Best Regards,
>>> Jaehoon Chung
>>>
>>>>
>>
>> [...]
>>
>>>>>> index ec6dbcd..7e1d13b 100644
>>>>>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>>>>>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>>>>>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
>>>>>>         host->pdata = pdev->dev.platform_data;
>>>>>>
>>>>>>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>>>> +    /* Get registers' physical base address */
>>>>>> +    host->phy_regs = (void *)(regs->start);
>>>>>>         host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>>>>>         if (IS_ERR(host->regs))
>>>>>>             return PTR_ERR(host->regs);
>>>>>
>>>>> Is this board specific code? If so, separate the patch.
>>
>> It's might not board specific code.
>> dmaengine need dw_mmc's *physical* fifo address for data transfer, so I get controller physical address  here in order to calculate physical fifo address.
>>
>> regs is from dt-bindings, for instance:
>>           dwmmc0@12200000 {
>>                   compatible = "snps,dw-mshc";
>>                    clocks = <&clock 351>, <&clock 132>;
>>                   clock-names = "biu", "ciu";
>>                   reg = <0x12200000 0x1000>;
>>                   interrupts = <0 75 0>;
>>                   #address-cells = <1>;
>>                   #size-cells = <0>;
>>           };
>>
>> so, host->phy_regs will be 0x12200000 .
>>
>> [...]
>>
>>>>>> +static void dw_mci_dmac_complete_dma(void *arg)
>>>>>>     {
>>>>>> +    struct dw_mci *host = arg;
>>>>>>         struct mmc_data *data = host->data;
>>>>>>
>>>>>>         dev_vdbg(host->dev, "DMA complete\n");
>>>>>>
>>>>>> +    if (host->use_dma == TRANS_MODE_EDMAC)
>>>>>> +        if (data && (data->flags & MMC_DATA_READ))
>>>>>
>>>>> Combine one condition.
>>
>> okay.
>>
>> [...]
>>
>>>>>> +    u32 fifo_offset = host->fifo_reg - host->regs;
>>>>>> +    int ret = 0;
>>>>>> +
>>>>>> +    /* Set external dma config: burst size, burst width */
>>>>>> +    cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
>>>>>
>>>>> host->phy_regs is not assigned?
>>
>> we got it at dw_mci_pltfm_register. See comments above. :)
>>
>> [...]
>>
>>>>>>             mmc->max_blk_count = mmc->max_req_size / 512;
>>>>>> +    } else if (host->use_dma == TRANS_MODE_EDMAC) {
>>>>>> +            mmc->max_segs = 64;
>>>>>> +            mmc->max_blk_size = 65536;
>>>>>> +            mmc->max_blk_count = 65535;
>>>>>> +            mmc->max_req_size =
>>>>>> +                    mmc->max_blk_size * mmc->max_blk_count;
>>>>>> +            mmc->max_seg_size = mmc->max_req_size;
>>>>>
>>>>> Fix the indention
>>
>> Hmm..I check it attentively but can't find the indention . Might it's because you apply it against Ulf's repo?
>>
>>>>>
>>
>> [...]
>>
>>>>>>
>>>>>> -    /* Alloc memory for sg translation */
>>>>>> -    host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
>>>>>> -                      &host->sg_dma, GFP_KERNEL);
>>>>>> -    if (!host->sg_cpu) {
>>>>>> -        dev_err(host->dev, "%s: could not alloc DMA memory\n",
>>>>>> -            __func__);
>>>>>> +    /* Check tansfer mode */
>>>>>> +    trans_mode = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
>>>>>> +    if (trans_mode == 0) {
>>>>>> +        trans_mode = TRANS_MODE_IDMAC;
>>>>>> +    } else if (trans_mode == 1 || trans_mode == 2) {
>>>>>> +        trans_mode = TRANS_MODE_EDMAC;
>>>>>> +    } else {
>>>>>> +        trans_mode = TRANS_MODE_PIO;
>>>>>
>>>>> what are trans_mode "0, 1, 2"?
>>>>> (00 - none) is NO-DMA interface, isn't? is it IDMAC mode?
>>>>>
>>
>> No, I guess the databook's ambiguous description confuse everybody.
>>
>> I got double comfirm from my ASCI team as well as Synoposys
>> 2b'00: NO-DMA interface -->  It support IDMAC actually
>> 2b'01 & 2b'02: DW_DMA & GENERIC_DMA --> Support 2 types of external dma.
>> 2b'02: NON-DW-DMA --> only support PIO
>
> Then Could you add the comment about this?
> Use definition instead of "0, 1, 2". Developer don't know meaning that is 0, 1, 2.
>

Okay. :)))

> Best Regards,
> Jaehoon Chung
>
>>
>> refer to the description below:
>> Parameter Name: DMA_INTERFACE
>> Legal Values: 0-3
>> Default Value: 0
>> Description:
>>   0- No DMA Interface
>>   1- DesignWare DMA Interface
>>   2- Generic DMA Interface
>>   3- Non DW DMA Interface
>> In DesignWare DMA mode, request/acknowledge protocol meets DW_ahb_dmac
>> controller protocol. In this mode, host data bus is also used for DMA transfers.Generic DMA-type interface has simpler request/acknowledge handshake and has dedicated read/write data bus for DMA transfers. Non DW DMAC interface uses dw_dma_single interface in addition to the existing interface and uses host data bus for DMA transfers. This is configurable only if INTERNAL_DMAC=0.
>>
>>>>>>             goto no_dma;
>>>>>>         }
>>>
>>>>>> +        dev_info(host->dev, "Using external DMA controller.\n");
>>>>>> +    }
>>>>>>
>>>>>>         if (!host->dma_ops)
>>>>>>             goto no_dma;
>>>>>> @@ -2562,12 +2720,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
>>>>>>             goto no_dma;
>>>>>>         }
>>>>>>
>>>>>> -    host->use_dma = 1;
>>>>>> +    host->use_dma = trans_mode;
>>>>>
>>>>> Also confuse, if trans_mode is assigned host->use_dma, can mode value be directly assigned to host->use_dma?
>>>>>
>>
>> Good idea, I will do it.  :)
>>
>>>>> trans_mode = TRAMS_MODE_PIO;
>>>>> host->use_dma = trans_mode;
>>>>>
>>
>> [...]
>>
>>>>>>
>>>>>> @@ -2890,7 +3047,7 @@ int dw_mci_probe(struct dw_mci *host)
>>>>>>          * Get the host data width - this assumes that HCON has been set with
>>>>>>          * the correct values.
>>>>>>          */
>>>>>> -    i = (mci_readl(host, HCON) >> 7) & 0x7;
>>>>>> +    i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
>>>>>
>>>>> This is not related with supporting external dma interface.
>>>>> Separate this.
>>>>>
>>
>> Okay, It will be split into another one.
>>
>>>>>>         if (!i) {
>>>>>>             host->push_data = dw_mci_push_data16;
>>>>>>             host->pull_data = dw_mci_pull_data16;
>>
>>
>>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>


-- 
Best Regards
Shawn Lin

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support Shawn Lin <shawn.lin@rock-chips.com> - 2015-08-20 10:50 +0200
  Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support Jaehoon Chung <jh80.chung@samsung.com> - 2015-08-21 08:30 +0200
    Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface  support Shawn Lin <shawn.lin@rock-chips.com> - 2015-08-21 08:40 +0200
      Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support Jaehoon Chung <jh80.chung@samsung.com> - 2015-08-21 08:40 +0200
        Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface  support Shawn Lin <shawn.lin@rock-chips.com> - 2015-08-21 09:30 +0200
          Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface support Jaehoon Chung <jh80.chung@samsung.com> - 2015-08-21 09:40 +0200
            Re: [RFC PATCH v6 1/9] mmc: dw_mmc: Add external dma interface  support Shawn Lin <shawn.lin@rock-chips.com> - 2015-08-21 09:50 +0200

csiph-web