Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1203303
| From | Russell King <rmk+kernel@arm.linux.org.uk> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling |
| Date | 2015-08-08 18:10 +0200 |
| Message-ID | <pVeR5-3EB-31@gated-at.bofh.it> (permalink) |
| References | <pVeR3-3EB-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The FSL kernel detects the HDMI vendor id, and uses this to set
hdmi->edid_cfg.hdmi_cap, which is then used to set mdvi appropriately,
rather than detecting whether we are outputting a CEA mode. Update
the dw_hdmi code to use this logic, but lets eliminate the mdvi
variable, prefering the more verbose "hdmi->sink_is_hdmi" instead.
Use the generic drm_detect_hdmi_monitor() to detect a HDMI sink.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/gpu/drm/bridge/dw_hdmi.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 2e211b8331ed..7f764716f3c4 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -82,7 +82,6 @@ static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
};
struct hdmi_vmode {
- bool mdvi;
bool mdataenablepolarity;
unsigned int mpixelclock;
@@ -123,6 +122,7 @@ struct dw_hdmi {
struct i2c_adapter *ddc;
void __iomem *regs;
+ bool sink_is_hdmi;
spinlock_t audio_lock;
struct mutex audio_mutex;
@@ -913,11 +913,10 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
{
int i, ret;
- bool cscon = false;
+ bool cscon;
/*check csc whether needed activated in HDMI mode */
- cscon = (is_color_space_conversion(hdmi) &&
- !hdmi->hdmi_data.video_mode.mdvi);
+ cscon = hdmi->sink_is_hdmi && is_color_space_conversion(hdmi);
/* HDMI Phy spec says to do the phy initialization sequence twice */
for (i = 0; i < 2; i++) {
@@ -1094,9 +1093,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
- inv_val |= (vmode->mdvi ?
- HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE :
- HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE);
+ inv_val |= hdmi->sink_is_hdmi ?
+ HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
+ HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF);
@@ -1236,10 +1235,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
if (!hdmi->vic) {
dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n");
- hdmi->hdmi_data.video_mode.mdvi = true;
} else {
dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic);
- hdmi->hdmi_data.video_mode.mdvi = false;
}
if ((hdmi->vic == 6) || (hdmi->vic == 7) ||
@@ -1275,10 +1272,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
dw_hdmi_enable_video_path(hdmi);
/* not for DVI mode */
- if (hdmi->hdmi_data.video_mode.mdvi) {
- dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
- } else {
- dev_dbg(hdmi->dev, "%s CEA mode\n", __func__);
+ if (hdmi->sink_is_hdmi) {
+ dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
/* HDMI Initialization Step E - Configure audio */
hdmi_clk_regenerator_update_pixel_clock(hdmi);
@@ -1286,6 +1281,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
/* HDMI Initialization Step F - Configure AVI InfoFrame */
hdmi_config_AVI(hdmi, mode);
+ } else {
+ dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
}
hdmi_video_packetize(hdmi);
@@ -1294,7 +1291,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
hdmi_tx_hdcp_config(hdmi);
dw_hdmi_clear_overflow(hdmi);
- if (hdmi->cable_plugin && !hdmi->hdmi_data.video_mode.mdvi)
+ if (hdmi->cable_plugin && hdmi->sink_is_hdmi)
hdmi_enable_overflow_interrupts(hdmi);
return 0;
@@ -1444,6 +1441,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
edid->width_cm, edid->height_cm);
+ hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/12] dw-hdmi development Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 05/12] drm: bridge/dw_hdmi: add support for interlaced video modes Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 12/12] drm: bridge/dw_hdmi: improve HDMI enable/disable handling Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
Re: [PATCH 0/9] dw-hdmi audio support Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 2/9] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values in N calculation Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 5/9] drm: bridge/dw_hdmi: avoid being recursive in N calculation Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 4/9] drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 8/9] drm: bridge/dw_hdmi: replace CTS calculation for the ACR Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
Re: [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-10 17:50 +0200
Re: [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Yakir Yang <ykk@rock-chips.com> - 2015-08-10 18:30 +0200
[PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
Re: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Takashi Iwai <tiwai@suse.de> - 2015-08-10 12:10 +0200
Re: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-10 12:40 +0200
Re: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Takashi Iwai <tiwai@suse.de> - 2015-08-10 14:30 +0200
Re: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-10 19:00 +0200
Re: [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Mark Brown <broonie@kernel.org> - 2015-08-10 20:20 +0200
Re: [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver David Airlie <airlied@linux.ie>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jaroslav Kysela <perex@perex.cz>, linux-rockchip@lists.infradead.org, Mark Brown <broonie@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Yakir Yang <ykk@rock-chips.com>, Andy Yan <andy.yan@rock-chips.com>, Jon Nettleton <jon.nettleton@gmail.com>, linux-arm-kernel@lists.infradead.org Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-14 16:00 +0200
Re: [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-14 16:10 +0200
Re: [alsa-devel] [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Takashi Iwai <tiwai@suse.de> - 2015-08-14 16:40 +0200
[PATCH 3/9] drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
[PATCH 08/12] drm: bridge/dw_hdmi: avoid enabling interface in mode_set Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 04/12] gpu: imx: fix support for interlaced modes Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 03/12] gpu: imx: simplify sync polarity setting Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 01/12] drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 02/12] drm: bridge/dw_hdmi: don't support any pixel doubled modes Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 11/12] drm: bridge/dw_hdmi: add connector mode forcing Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:10 +0200
[PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling Russell King <rmk+kernel@arm.linux.org.uk> - 2015-08-08 18:20 +0200
Re: [PATCH 00/12] dw-hdmi development Thierry Reding <thierry.reding@gmail.com> - 2015-08-10 14:30 +0200
Re: [PATCH 00/12] dw-hdmi development Russell King - ARM Linux <linux@arm.linux.org.uk> - 2015-08-18 12:40 +0200
csiph-web