Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1201088

Re: [PATCH] can: xilinx: fix RX FIFO overflow error handling

Show all headers | View raw

Michal,
Kedar,

Any feedback regarding my patch?
Have you ever experienced such a problem?

Andrea SCIAN

*DAVE Embedded Systems*
via Talponedo 29/A 33080 Porcia (PN) - Italy
Telephone: +39.0434.921215
Telefax: +39.0434.1994030
web: www.dave.eu <http://www.dave.eu>


Il 24/07/2015 06:15, Michal Simek ha scritto:
> + Kedar
>
> On 07/23/2015 11:13 PM, Andrea Scian wrote:
>> Simply resetting the peripheral on RX FIFO overflow in not enough,
>> because we also need to re-initialize the whole device.
>> Also always enable RX FIFO overflow interrupt otherwise we may hang
>> until another interrupt arrives (this happens if FIFO overrun and just
>> read from CAN bus with candump)
>>
>> Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
>> ---
>>
>> You can reproduce the problem with the following test-bed
>> * connect a Zynq based board to a PC with a CAN bus adapter (e.g. PCAN USB)
>> * start sending lots of CAN messages to Zynq system
>> * configure and start xilinx CAN driver
>> ** canconfig can0 bitrate 1000000
>> ** canconfig can0 start
>> * try to send/receive messages (cansend/candump)
>> * if you send a CAN message you'll get the RX FIFO error and additional messages
>> will not be received
>> * if you try to get messages you simple don't receive them (no interrupt triggered)
>> * with canconfig stop/start the hang goes away (if the others peers stop sending
>> send lots of messages ;-) )
>>
>> I tested the patch over xilinx-2014.04 kernel, but the patch applies cleanly to
>> mainline too.
>>
>> If someone has a better understanding of Xilinx CAN driver, please let me know if
>> it's better to handle the error in a different manner.
>>
>> Maybe the bus off handler need the same threadment too.
>>
>> TIA,
>>
>> Andrea Scian
>>
>> ---
>>   drivers/net/can/xilinx_can.c |    5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
>> index 5e8b560..c278177 100644
>> --- a/drivers/net/can/xilinx_can.c
>> +++ b/drivers/net/can/xilinx_can.c
>> @@ -100,6 +100,7 @@ enum xcan_reg {
>>   #define XCAN_INTR_ALL		(XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\
>>   				 XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \
>>   				 XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \
>> +				 XCAN_IXR_RXOFLW_MASK | \
>>   				 XCAN_IXR_ARBLST_MASK | XCAN_IXR_RXOK_MASK)
>>
>>   /* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */
>> @@ -526,6 +527,7 @@ static int xcan_rx(struct net_device *ndev)
>>   	return 1;
>>   }
>>
>> +static void xcan_chip_stop(struct net_device *ndev);
>>   /**
>>    * xcan_err_interrupt - error frame Isr
>>    * @ndev:	net_device pointer
>> @@ -597,7 +599,8 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
>>   	if (isr & XCAN_IXR_RXOFLW_MASK) {
>>   		stats->rx_over_errors++;
>>   		stats->rx_errors++;
>> -		priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
>> +		xcan_chip_stop(ndev);
>> +		xcan_chip_start(ndev);
>>   		if (skb) {
>>   			cf->can_id |= CAN_ERR_CRTL;
>>   			cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH] can: xilinx: fix RX FIFO overflow error handling Andrea Scian - DAVE Embedded Systems <andrea.scian@dave.eu> - 2015-08-05 22:10 +0200

csiph-web