Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1198660

[PATCH v10 3/5] mtd: nand: vf610_nfc: add device tree bindings

Show all headers | View raw

Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 .../devicetree/bindings/mtd/vf610-nfc.txt          | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/vf610-nfc.txt

diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
new file mode 100644
index 0000000..cae5f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
@@ -0,0 +1,45 @@
+Freescale's NAND flash controller (NFC)
+
+This variant of the Freescale NAND flash controller (NFC) can be found on
+Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc"
+- reg: address range of the NFC
+- interrupts: interrupt of the NFC
+- nand-bus-width: see nand.txt
+- nand-ecc-mode: see nand.txt
+- nand-on-flash-bbt: see nand.txt
+- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
+- assigned-clock-rates: The NAND bus timing is derived from this clock
+    rate and should not exceed maximum timing for any NAND memory chip
+    in a board stuffing. Typical NAND memory timings derived from this
+    clock are found in the SoC hardware reference manual. Furthermore,
+    there might be restrictions on maximum rates when using hardware ECC.
+
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+
+Required properties for hardware ECC:
+- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt)
+- nand-ecc-step-size: step size equals page size, currently only 2k pages are
+    supported
+
+Example:
+
+	nfc: nand@400e0000 {
+		compatible = "fsl,vf610-nfc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x400e0000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks VF610_CLK_NFC>;
+		clock-names = "nfc";
+		assigned-clocks = <&clks VF610_CLK_NFC>;
+		assigned-clock-rates = <33000000>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v10 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610 Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
  [PATCH v10 5/5] ARM: dts: vf-colibri: enable NAND flash controller Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
  [PATCH v10 3/5] mtd: nand: vf610_nfc: add device tree bindings Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
  [PATCH v10 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC support Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
    Re: [PATCH v10 2/5] mtd: nand: vf610_nfc: add hardware BCH-ECC  support Stefan Agner <stefan@agner.ch> - 2015-08-03 11:40 +0200
  [PATCH v10 4/5] ARM: dts: vf610twr: add NAND flash controller peripherial Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
  [PATCH v10 1/5] mtd: nand: vf610_nfc: Freescale NFC for VF610, MPC5125 and others Stefan Agner <stefan@agner.ch> - 2015-08-03 11:30 +0200
  Re: [PATCH v10 0/5] mtd: nand: vf610_nfc: Freescale NFC for VF610 Albert ARIBAUD <albert.aribaud@3adev.fr> - 2015-08-03 12:40 +0200

csiph-web