Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1198471

[PATCH v3 0/5] clk: hisilicon: support stub clock

From Leo Yan <leo.yan@linaro.org>
Newsgroups linux.kernel
Subject [PATCH v3 0/5] clk: hisilicon: support stub clock
Date 2015-08-03 03:20 +0200
Message-ID <pTcA1-4np-1@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


This series adds support for hisilicon stub clock driver. On hi6220,
the bootloader needs load the firmware image and set info for OPPs;
after run into kernel, the stub clock driver is used to communicate
w/t firmware for cpu dynamic frequency scaling.

In patch series v1/v2, the stub clock driver simply writes request in
sram and send ipc to firmware; For patch series v3, the firmware has
been upgraded to use mailbox, so stub clock driver will call standard
mailbox APIs to request mailbox channel and send message to firmware.

These patches have been tested on 96board hikey and is used by cpufreq
driver.

Changes from v2:
* Use platform_device's probe for clock's initialization
* Use mailbox channel for clock frequency change

Changes from v1:
* Refine parameter checking for init flow
* Remove unnecessary debugging info
* Modify to check spinlock pointer when register clocks


Leo Yan (5):
  clk: hisi: refine parameter checking for init
  dt-bindings: arm: Hi6220: add doc for SRAM controller
  dt-bindings: clk: Hi6220: Document stub clock driver
  clk: Hi6220: add stub clock driver
  arm64: dts: add Hi6220's stub clock node

 .../bindings/arm/hisilicon/hisilicon.txt           |  18 ++
 .../devicetree/bindings/clock/hi6220-clock.txt     |  19 +-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi          |  23 ++
 drivers/clk/hisilicon/Kconfig                      |   2 +-
 drivers/clk/hisilicon/Makefile                     |   2 +-
 drivers/clk/hisilicon/clk-hi6220-stub.c            | 279 +++++++++++++++++++++
 drivers/clk/hisilicon/clk.c                        |  11 +-
 7 files changed, 343 insertions(+), 11 deletions(-)
 create mode 100644 drivers/clk/hisilicon/clk-hi6220-stub.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[PATCH v3 0/5] clk: hisilicon: support stub clock Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
  [PATCH v3 2/5] dt-bindings: arm: Hi6220: add doc for SRAM controller Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
  [PATCH v3 3/5] dt-bindings: clk: Hi6220: Document stub clock driver Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
  [PATCH v3 5/5] arm64: dts: add Hi6220's stub clock node Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
  [PATCH v3 4/5] clk: Hi6220: add stub clock driver Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
    Re: [PATCH v3 4/5] clk: Hi6220: add stub clock driver Stephen Boyd <sboyd@codeaurora.org> - 2015-08-03 23:40 +0200
      Re: [PATCH v3 4/5] clk: Hi6220: add stub clock driver Leo Yan <leo.yan@linaro.org> - 2015-08-04 08:30 +0200
  [PATCH v3 1/5] clk: hisi: refine parameter checking for init Leo Yan <leo.yan@linaro.org> - 2015-08-03 03:20 +0200
    Re: [PATCH v3 1/5] clk: hisi: refine parameter checking for init Stephen Boyd <sboyd@codeaurora.org> - 2015-08-03 23:50 +0200

csiph-web