Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1191681

Re: [PATCH v3 1/4] i2c: tegra: implement slave mode

Show all headers | View raw

On 24.07.2015 12:27, Wolfram Sang wrote:
> Still doesn't work for me and I think I understand why. Do you run your
> I2C controller in slave mode only?

Yes.

> That might work, but using it in
> master/slave mode simultanously won't work yet as I see it:
>
> * After every transfer (as master), clocks get disabled. I assume the IP
>    core won't be able to detect its own address then.

At the begin of my work on this patchset I even denied clock disable 
call if slave is registered (to minimize code that can affect transfer). 
If only slave mode is used, then this logic is not needed.

>
> * There is this code in tegra_i2c_init():
>
> 	if (!i2c_dev->is_dvc) {
> 		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
> 		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
> 		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
> 		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
> 		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
>
> 	}
>
>    It probably messes up the slave initialization in tegra_reg_slave().
>    At least I see that the slave address gets overwritten when I peek
>    the register after boot.
>

tegra_i2c_init is called on probe and resume. Also it is called in case 
of xfer fail. If xfer is ok, then I think slave addr must be kept unchanged.

> Does that make sense to you?

As far as I understand it is a loopback mode. Probably it will not work 
(Stephen Warren already mentioned this).
But we can try to run it.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v3 1/4] i2c: tegra: implement slave mode Wolfram Sang <wsa@the-dreams.de> - 2015-07-24 11:30 +0200
  Re: [PATCH v3 1/4] i2c: tegra: implement slave mode Andrey Danin <danindrey@mail.ru> - 2015-07-24 12:20 +0200
    Re: [PATCH v3 1/4] i2c: tegra: implement slave mode Wolfram Sang <wsa@the-dreams.de> - 2015-07-24 13:00 +0200

csiph-web