Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1182800

[PATCH 2/2] ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2

From Roger Quadros <rogerq@ti.com>
Newsgroups linux.kernel
Subject [PATCH 2/2] ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
Date 2015-07-13 15:10 +0200
Message-ID <pLLED-5rE-37@gated-at.bofh.it> (permalink)
References <pLLEC-5rE-17@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


The VBUS line of USB2 is connected to VBUS detect logic on
the PMIC. Use the palmas-usb driver to report VBUS events
to the USB driver.

As the palmas-usb driver supports GPIO based ID reporting
provide the GPIO for ID pin as well.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/am57xx-beagle-x15.dts | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78..bd185e0 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -98,13 +98,6 @@
 		pinctrl-0 = <&extcon_usb1_pins>;
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb2_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -495,6 +488,16 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-gpio-id-detection;
+			id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&extcon_usb2_pins>;
+		};
+
 	};
 
 	tmp102: tmp102@48 {
@@ -624,6 +627,14 @@
 };
 
 &usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
 	dr_mode = "peripheral";
 };
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[PATCH 0/2] extcon: palmas: am57xx-beagle-x15: use palmas for VBUS/ID detection Roger Quadros <rogerq@ti.com> - 2015-07-13 15:10 +0200
  [PATCH 1/2] extcon: palmas: Support GPIO based USB ID detection Roger Quadros <rogerq@ti.com> - 2015-07-13 15:10 +0200
  [PATCH 2/2] ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 Roger Quadros <rogerq@ti.com> - 2015-07-13 15:10 +0200

csiph-web