Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1180301

Re: [PATCH 1/2] serial: 8250: Fix autoconfig_irq() to avoid race conditions

Show all headers | View raw

On 06/05/2015 05:57 AM, Taichi Kageyama wrote:
> The following race conditions can happen if a serial is used as console.
>   Case1. CPU_B handles an interrupt from a serial
>     autoconfig_irq() fails whether the interrupt is raised or not
>     if CPU_B is disabled to handle interrupts for longer than it expects.
>   Case2. CPU_B clears UART_IER just after CPU_A sets UART_IER
>     A serial may not make an interrupt.
>     autoconfig_irq() can fail if the interrupt is not raised.
>   Case3. CPU_A sets UART_IER just after CPU_B clears UART_IER
>     This is an unexpected behavior for uart_console_write().
> 
>   CPU_A [autoconfig_irq]      CPU_B [serial8250_console_write]
>   -----------------------------------------------------------------
>   probe_irq_on()              spin_lock_irqsave(&port->lock,)
>   serial_outp(,UART_IER,0x0f) serial_out(,UART_IER,0)
>   udelay(20);                 uart_console_write()
>   probe_irq_off()
>                               spin_unlock_irqrestore(&port->lock,)
>   -----------------------------------------------------------------
> 
> If autoconfig_irq() fails, the console doesn't work in interrupt mode,
> the mode cannot be changed anymore, and "input overrun"
> (which can make operation mistakes) happens easily.
> This problem happens with high rate every boot once it occurs
> because the boot sequence is always almost same.

Reviewed-by: Peter Hurley <peter@hurleysoftware.com>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH 1/2] serial: 8250: Fix autoconfig_irq() to avoid race  conditions Peter Hurley <peter@hurleysoftware.com> - 2015-07-09 01:40 +0200

csiph-web