Re: [PATCH v2 0/3] ARM: keystone: add ecc error interrupt handling

From	Stephen Boyd <sboyd@codeaurora.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 0/3] ARM: keystone: add ecc error interrupt handling
Date	2015-06-25 23:40 +0200
Message-ID	<pFn2i-42w-23@gated-at.bofh.it> (permalink)
References	<pFgka-2TH-9@gated-at.bofh.it> <pFgWR-3SG-15@gated-at.bofh.it> <pFmzg-3uF-9@gated-at.bofh.it> <pFn2i-42w-25@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 06/25/2015 02:30 PM, santosh shilimkar wrote:
> On 6/25/2015 2:02 PM, Stephen Boyd wrote:
>> On 06/25/2015 08:04 AM, santosh shilimkar wrote:
>>> On 6/25/2015 7:31 AM, Vitaly Andrianov wrote:
>>>> This patch series adds support for arm L1/L2 ecc and ddr3 ecc error
>>>> handling
>>>> for Keystone devices
>>>>
>>>> Change Log
>>>>
>>>> v2:
>>>> - removing unused and sorting headers of keystone.c are moved to a
>>>> separate
>>>>     patch.
>>>> - l1l2 ecc and ddr3 ecc error handling are split it to separate
>>>> patches
>>>> - removed unused headers from keystone_ecc.c
>>>> - platsmp.c removed from the patch.
>>>> - return IRQ_HANDLED for 1 bit error in l1l2 ecc handler
>>>> - checked and handled existing echttps://lwn.net/Articles/593336/c
>>>> error before enabling ddr3 interrupt
>>>> - 1 bit ddr3 interrupt is disabled, because it is handled by hardware
>>>> and
>>>>     there is no reason to handle it by software
>>>>
>>> This version looks good to me. As already commented, I would have liked
>>> the patch 2/3(L2 ECC) code in ARM generic code so will give some more
>>> time for others to come back. Otherwise I will queue this up for next
>>> window.
>>
>> Why not make this into an edac driver? I sent out an L1/L2 error
>> detection edac driver for Krait processors a year ago, but it stalled
>> due to some DT binding stuff[1]. This looks fairly similar.
>>
> Indeed the error detection part is very similar(expected as well
> considering the same processor L2 regs). I am not sure we need
> full driver only for that but at least the IRQ error handler
> related code can reside together. Lets see what RMK thinks
> on this.
>

There's an existing one for highbank (drivers/edac/highbank_l2_edac.c)
and there was a patch set for the pl310 as well[1]. I don't think we
want any architecture specific code for this, just use the EDAC framework.

[1] https://lkml.org/lkml/2014/3/2/87

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v2 0/3] ARM: keystone: add ecc error interrupt handling Stephen Boyd <sboyd@codeaurora.org> - 2015-06-25 23:40 +0200
  Re: [PATCH v2 0/3] ARM: keystone: add ecc error interrupt handling Stephen Boyd <sboyd@codeaurora.org> - 2015-07-02 02:20 +0200

csiph-web