[PATCH 0/5] Enable SPI ethernet on MSM8960 CDP

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Stephen Boyd <sboyd@codeaurora.org>
Newsgroups	linux.kernel
Subject	[PATCH 0/5] Enable SPI ethernet on MSM8960 CDP
Date	Tue, 16 Jun 2015 22:40:01 +0200
Message-ID	<pC5Oh-4ZG-9@gated-at.bofh.it> (permalink)
X-Original-To	Andy Gross <agross@codeaurora.org>
X-Mailer	git-send-email 2.3.0.rc1.33.g42e4583
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	24
Organization	linux.* mail to news gateway
X-Original-Cc	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org
X-Original-Date	Tue, 16 Jun 2015 13:31:11 -0700
X-Original-Message-ID	<1434486676-21812-1-git-send-email-sboyd@codeaurora.org>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	aioe.org linux.kernel:1166384

Show key headers only | View raw

These patches enable the ks8851 SPI ethernet adapter found on
MSM8960 CDPs.

Stephen Boyd (5):
  ARM: dts: qcom: Replace gpio node with pinctrl node
  ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes
  ARM: dts: qcom: Add MSM8960 CDP RPM regulators
  ARM: dts: qcom: Add ks8851 node for wired ethernet
  ARM: qcom_defconfig: Enable options for KS8851 ethernet

 arch/arm/boot/dts/qcom-msm8960-cdp.dts | 302 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi    |  49 +++++-
 arch/arm/configs/qcom_defconfig        |   3 +
 3 files changed, 351 insertions(+), 3 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/5] Enable SPI ethernet on MSM8960 CDP Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200
  [PATCH 2/5] ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200
  [PATCH 4/5] ARM: dts: qcom: Add ks8851 node for wired ethernet Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200
  [PATCH 3/5] ARM: dts: qcom: Add MSM8960 CDP RPM regulators Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200
  [PATCH 1/5] ARM: dts: qcom: Replace gpio node with pinctrl node Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200
  [PATCH 5/5] ARM: qcom_defconfig: Enable options for KS8851 ethernet Stephen Boyd <sboyd@codeaurora.org> - 2015-06-16 22:40 +0200

csiph-web