[PATCH v2 0/6] SPMI regulator driver

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Stephen Boyd <sboyd@codeaurora.org>
Newsgroups	linux.kernel
Subject	[PATCH v2 0/6] SPMI regulator driver
Date	Fri, 12 Jun 2015 02:40:01 +0200
Message-ID	<pAlaN-5CK-3@gated-at.bofh.it> (permalink)
X-Original-To	Mark Brown <brooni@kernel.org>
X-Mailer	git-send-email 2.3.0.rc1.33.g42e4583
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	47
Organization	linux.* mail to news gateway
X-Original-Cc	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, David Collins <collinsd@codeaurora.org>
X-Original-Date	Thu, 11 Jun 2015 17:31:01 -0700
X-Original-Message-ID	<1434069067-1371-1-git-send-email-sboyd@codeaurora.org>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	aioe.org linux.kernel:1163683

Show key headers only | View raw

This patchset adds support for the regulators found on Qualcomm's
SPMI PMICs. The first patch is the "basic" driver that doesn't have
any non-standard features. The next 4 patches add ways to configure some
of the non-standard features that are generic but aren't supported
in the regulator framework. And the final patch adds support
for the non-standard features and some vendor specific features to
the SPMI regulator driver.

Changes since v1:
 * Split driver into standard and non-standard patches to ease review
 * New patches to regulator framework for non-standard features
 * Added bypass support
 * Namespaced macros
 * Switch to set_load() ops instead of get_optimum_mode()
 * Consolidated range finding code
 * Used delay op to calculate how long to delay after setting voltage on FTSMPS

Stephen Boyd (6):
  regulator: Add QCOM SPMI regulator driver
  regulator: Add system_load constraint
  regulator: Add pull down support
  regulator: Add soft start support
  regulator: Add input current limit support
  regulator: qcom-spmi: Add vendor specific configuration

 .../bindings/regulator/qcom,spmi-regulator.txt     |  183 +++
 .../devicetree/bindings/regulator/regulator.txt    |    5 +
 drivers/regulator/Kconfig                          |   11 +
 drivers/regulator/Makefile                         |    1 +
 drivers/regulator/core.c                           |   27 +
 drivers/regulator/of_regulator.c                   |   12 +
 drivers/regulator/qcom_spmi-regulator.c            | 1678 ++++++++++++++++++++
 include/linux/regulator/driver.h                   |   10 +
 include/linux/regulator/machine.h                  |    8 +
 9 files changed, 1935 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
 create mode 100644 drivers/regulator/qcom_spmi-regulator.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 0/6] SPMI regulator driver Stephen Boyd <sboyd@codeaurora.org> - 2015-06-12 02:40 +0200
  Re: [PATCH v2 0/6] SPMI regulator driver Stephen Boyd <sboyd@codeaurora.org> - 2015-06-12 02:40 +0200
  [PATCH v2 3/6] regulator: Add pull down support Stephen Boyd <sboyd@codeaurora.org> - 2015-06-12 02:40 +0200
  [PATCH v2 4/6] regulator: Add soft start support Stephen Boyd <sboyd@codeaurora.org> - 2015-06-12 02:40 +0200

csiph-web