Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #204212 > unrolled thread

OT: HDD Adapter for fujitsu Server 2,5" to 3,5"

Back to article view | Back to linux.debian.user

Contents

  OT: HDD Adapter for fujitsu Server 2,5" to 3,5" basti <mailinglist@unix-solution.de> - 2019-01-08 18:40 +0100
    Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5" Dan Ritter <dsr@randomstring.org> - 2019-01-08 18:50 +0100
    Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5" Joe <joe@jretrading.com> - 2019-01-08 20:10 +0100
      Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5" basti <mailinglist@unix-solution.de> - 2019-01-08 21:00 +0100
        Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5" Dan Ritter <dsr@randomstring.org> - 2019-01-08 21:10 +0100
        Re: OT: HDD Adapter for fujitsu Server 2,5" to 3,5" Joe <joe@jretrading.com> - 2019-01-08 21:20 +0100

#204212 — OT: HDD Adapter for fujitsu Server 2,5" to 3,5"

Hallo,
we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
FSC A3C40056861 or A3C40032808.

All I have found is an Howto to glue the SSD into the A3C40056861 but I
think it's not an good idea if I must change the SSD for some reason.

I don't want to have extra electrical parts inside of the adapter and
between the backplane and the ssd if possible.

Are there any experience with this?

Best Regards

[toc] | [next] | [standalone]

#204214

basti wrote: 
> Hallo,
> we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
> SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
> FSC A3C40056861 or A3C40032808.
> 
> All I have found is an Howto to glue the SSD into the A3C40056861 but I
> think it's not an good idea if I must change the SSD for some reason.
> 
> I don't want to have extra electrical parts inside of the adapter and
> between the backplane and the ssd if possible.
> 
> Are there any experience with this?

I don't know your specifics, but these:
https://www.icydock.com/goods.php?id=80

go inside most caddys and position the 2.5" disk so that the
interfaces are where the 3.5" SATA standard expects them.

-dsr-

[toc] | [prev] | [next] | [standalone]

#204215

On Tue, 8 Jan 2019 18:29:39 +0100
basti <mailinglist@unix-solution.de> wrote:

> Hallo,
> we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
> SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
> FSC A3C40056861 or A3C40032808.
> 
> All I have found is an Howto to glue the SSD into the A3C40056861 but
> I think it's not an good idea if I must change the SSD for some
> reason.
> 
> I don't want to have extra electrical parts inside of the adapter and
> between the backplane and the ssd if possible.
> 
> Are there any experience with this?

Yes, I bought an adaptor plate recently on Ebay but it wasn't anywhere
near right, I had to cut and drill a bit of aluminium to attach to it
to make it all fit. I had the impression from the advertisement that
they were 'standard'.

-- 
Joe

[toc] | [prev] | [next] | [standalone]

#204217

On 08.01.19 20:06, Joe wrote:
> On Tue, 8 Jan 2019 18:29:39 +0100
> basti <mailinglist@unix-solution.de> wrote:
> 
>> Hallo,
>> we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
>> SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
>> FSC A3C40056861 or A3C40032808.
>>
>> All I have found is an Howto to glue the SSD into the A3C40056861 but
>> I think it's not an good idea if I must change the SSD for some
>> reason.
>>
>> I don't want to have extra electrical parts inside of the adapter and
>> between the backplane and the ssd if possible.
>>
>> Are there any experience with this?
> 
> Yes, I bought an adaptor plate recently on Ebay but it wasn't anywhere
> near right, I had to cut and drill a bit of aluminium to attach to it
> to make it all fit. I had the impression from the advertisement that
> they were 'standard'.
> 

Perhaps I will try this one.

https://www.sabrent.com/product/BK-PCBS/2-5-ssd-sata-hard-drive-desktop-3-5-sata-bay-converter-mounting-kit/

And write some feedback next weeks.

[toc] | [prev] | [next] | [standalone]

#204219

basti wrote: 
> 
> 
> On 08.01.19 20:06, Joe wrote:
> > On Tue, 8 Jan 2019 18:29:39 +0100
> > basti <mailinglist@unix-solution.de> wrote:
> > 
> >> Hallo,
> >> we have some Fujitsu TX 150 Server with 3,5" HDD and want to install
> >> SSD's (2,5"). We are looking for an adapter usable for HDD Caddy
> >> FSC A3C40056861 or A3C40032808.
> >>
> >> All I have found is an Howto to glue the SSD into the A3C40056861 but
> >> I think it's not an good idea if I must change the SSD for some
> >> reason.
> >>
> >> I don't want to have extra electrical parts inside of the adapter and
> >> between the backplane and the ssd if possible.
> >>
> >> Are there any experience with this?
> > 
> > Yes, I bought an adaptor plate recently on Ebay but it wasn't anywhere
> > near right, I had to cut and drill a bit of aluminium to attach to it
> > to make it all fit. I had the impression from the advertisement that
> > they were 'standard'.
> > 
> 
> Perhaps I will try this one.
> 
> https://www.sabrent.com/product/BK-PCBS/2-5-ssd-sata-hard-drive-desktop-3-5-sata-bay-converter-mounting-kit/
> 

That should work. I hope the side screw holes are at the right
height, though.

-dsr-

[toc] | [prev] | [next] | [standalone]

#204220

On Tue, 8 Jan 2019 20:57:00 +0100
basti <mailinglist@unix-solution.de> wrote:


> 
> Perhaps I will try this one.
> 
> https://www.sabrent.com/product/BK-PCBS/2-5-ssd-sata-hard-drive-desktop-3-5-sata-bay-converter-mounting-kit/
> 
> And write some feedback next weeks.
> 

I've just bought a USB drive enclosure from them, which seems well
enough made.

-- 
Joe

[toc] | [prev] | [standalone]

Back to top | Article view | linux.debian.user

csiph-web