Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #203126 > unrolled thread

Non-GUI Arduino IDE ?

Back to article view | Back to linux.debian.user

Contents

  Non-GUI Arduino IDE ? Jason <electron@emypeople.net> - 2018-12-07 17:40 +0100
    Re: Non-GUI Arduino IDE ? Joe <joe@jretrading.com> - 2018-12-07 17:50 +0100
    Re: Non-GUI Arduino IDE ? Joe <joe@jretrading.com> - 2018-12-07 17:50 +0100
    Re: Non-GUI Arduino IDE ? Dan Purgert <dan@djph.net> - 2018-12-07 18:20 +0100
      Re: Non-GUI Arduino IDE ? deloptes <deloptes@gmail.com> - 2018-12-07 19:20 +0100
      Re: Non-GUI Arduino IDE ? Jason <electron@emypeople.net> - 2018-12-08 00:00 +0100
        Re: Non-GUI Arduino IDE ? Linux-Fan <Ma_Sys.ma@web.de> - 2018-12-08 01:10 +0100
        Re: Non-GUI Arduino IDE ? Erik Christiansen <dvalin@internode.on.net> - 2018-12-08 03:40 +0100
          Re: Non-GUI Arduino IDE ? Jason <electron@emypeople.net> - 2018-12-08 18:00 +0100
        Re: Non-GUI Arduino IDE ? Dan Purgert <dan@djph.net> - 2018-12-08 13:20 +0100
    Re: Non-GUI Arduino IDE ? conover@rahul.net (John Conover) - 2018-12-07 18:20 +0100
    Re: Non-GUI Arduino IDE ? Cindy-Sue Causey <butterflybytes@gmail.com> - 2018-12-07 18:20 +0100
      Re: Non-GUI Arduino IDE ? Jason <electron@emypeople.net> - 2018-12-08 00:00 +0100
    Re: Non-GUI Arduino IDE ? Ryan Nowakowski <tubaman@fattuba.com> - 2018-12-09 02:30 +0100

#203126 — Non-GUI Arduino IDE ?

Does anyone know if there is a console based Arduino IDE available for 
Debian? I am interested in making a portable programmer that could be 
taken out on a job to edit and upload Arduino programs on site, without 
messing with a mouse.

Thanks,
-- 
Jason

[toc] | [next] | [standalone]

#203127

On Fri, 7 Dec 2018 10:28:48 -0600
Jason <electron@emypeople.net> wrote:

> Does anyone know if there is a console based Arduino IDE available
> for Debian? I am interested in making a portable programmer that
> could be taken out on a job to edit and upload Arduino programs on
> site, without messing with a mouse.
> 

Or this?

https://github.com/sudar/Arduino-Makefile

-- 
Joe

[toc] | [prev] | [next] | [standalone]

#203128

On Fri, 7 Dec 2018 10:28:48 -0600
Jason <electron@emypeople.net> wrote:

> Does anyone know if there is a console based Arduino IDE available
> for Debian? I am interested in making a portable programmer that
> could be taken out on a job to edit and upload Arduino programs on
> site, without messing with a mouse.
>

Does this look useful?

https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc

-- 
Joe

[toc] | [prev] | [next] | [standalone]

#203129

Jason wrote:
> Does anyone know if there is a console based Arduino IDE available for 
> Debian? I am interested in making a portable programmer that could be 
> taken out on a job to edit and upload Arduino programs on site, without 
> messing with a mouse.

Don't know of any IDEs for the commandline, but you can always use
avrdude straight from the commandline to handle writing the compiled hex
to the thing.

-- 
|_|O|_| Registered Linux user #585947
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: 05CA 9A50 3F2E 1335 4DC5  4AEE 8E11 DDF3 1279 A281

[toc] | [prev] | [next] | [standalone]

#203132

Dan Purgert wrote:

> Don't know of any IDEs for the commandline, but you can always use
> avrdude straight from the commandline to handle writing the compiled hex
> to the thing.

I did not use it with Arduino, but with few different Atmel chips it worked
just fine from the command line.

regards

[toc] | [prev] | [next] | [standalone]

#203140

On Fri, Dec 07, 2018 at 05:05:30PM -0000, Dan Purgert wrote:
> Jason wrote:
> > Does anyone know if there is a console based Arduino IDE available for 
> > Debian? I am interested in making a portable programmer that could be 
> > taken out on a job to edit and upload Arduino programs on site, without 
> > messing with a mouse.
> 
> Don't know of any IDEs for the commandline, but you can always use
> avrdude straight from the commandline to handle writing the compiled hex
> to the thing.

And what could I use to create the compiled hex?

Thanks,
-- 
Jason

[toc] | [prev] | [next] | [standalone]

#203146

[Multipart message — attachments visible in raw view] — view raw

Jason writes:

> On Fri, Dec 07, 2018 at 05:05:30PM -0000, Dan Purgert wrote:
> > Jason wrote:
> > > Does anyone know if there is a console based Arduino IDE available for
> > > Debian? I am interested in making a portable programmer that could be
> > > taken out on a job to edit and upload Arduino programs on site, without
> > > messing with a mouse.
> >
> > Don't know of any IDEs for the commandline, but you can always use
> > avrdude straight from the commandline to handle writing the compiled hex
> > to the thing.
>
> And what could I use to create the compiled hex?

Hello,

I was able to get to run a blinking program on an Arduino Nano v3 with the  
following codes (two files, .hex and .o file are generated as part of the  
process):

-- BEGIN Makefile --
# depends: avr-libc, avrdude, gcc-avr

build:
	avr-gcc -Os -DF_CPU=16000000UL -mmcu=atmega328p -c -o led.o led.c
	avr-gcc -mmcu=atmega328p led.o -o led
	avr-objcopy -O ihex -R .eeprom led led.hex

upload:
	avrdude -F -V -c arduino -p ATMEGA328P -P /dev/ttyUSB0 \
					-b 57600 -U flash:w:led.hex
-- END Makefile --

-- BEGIN led.c --
#include <avr/io.h>
#include <util/delay.h>

#define BLINK_DELAY_MS 2000

void main()
{
	/* PB5(SCK) = 17 = D13 = LED3 */

	/* set pin 5 of PORTB for output*/
	DDRB |= _BV(DDB5);

	while(1) {
		/*
		 * _BV: Bit mask for port: /usr/lib/avr/include/avr/iom328p.h
		 *                         /usr/lib/avr/include/avr/sfr_defs.h
		 */

		/* set pin 5 high to turn led on */
		PORTB |= _BV(PORTB5);
		_delay_ms(BLINK_DELAY_MS);

		/* set pin 5 low to turn led off */
		PORTB &= ~_BV(PORTB5);
		_delay_ms(BLINK_DELAY_MS);
	}
}
-- END led.c --

It is invoked as follows

$ make build
$ make upload

and assumes that the Arduino is recognized under /dev/ttyUSB0.

HTH
Linux-Fan

[toc] | [prev] | [next] | [standalone]

#203150

On 07.12.18 16:42, Jason wrote:
> On Fri, Dec 07, 2018 at 05:05:30PM -0000, Dan Purgert wrote:
> > Jason wrote:
> > > Does anyone know if there is a console based Arduino IDE available for 
> > > Debian? I am interested in making a portable programmer that could be 
> > > taken out on a job to edit and upload Arduino programs on site, without 
> > > messing with a mouse.
> > 
> > Don't know of any IDEs for the commandline, but you can always use
> > avrdude straight from the commandline to handle writing the compiled hex
> > to the thing.
> 
> And what could I use to create the compiled hex?

The Arduino IDE uses the GNU toolchain behind the scenes. There are
people who use the toolchain on the commandline, eschewing the GUI.
Since the AVR crosscompiler and binutils will already be installed with
the IDE, it is just a matter of editing sourcefiles with your favourite
text editor, then running "make". If the IDE doesn't produce a makefile,
instead using something nonstandard, you could look at the upthread
link to Arduino-Makefile.

As I program AVRs directly (without bootloader), using avrdude, I had to
check the manpage to see if it is compatible with the Arduino
bootloader:

» The Arduino (which is very similar to the STK500 1.x) is supported via
   its own programmer type specification ``arduino''.
«

That would presumably merely use a laptop USB port to interface to the
Arduino target board.

It looks pretty straightforward, but reading a few of the hits for a google
of "arduino gnu toolchain", it seems that after editing the source with
e.g. vim or emacs, the Arduino IDE itself can be commandline invoked
without any GUI:

» Alternatively, if any of the following command line options is given,
  no graphical interface will be shown and instead a one-off verify
  (compile) or upload will be done.
«

https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc

(I think that link has already been cited upthread.)

Erik

[toc] | [prev] | [next] | [standalone]

#203173

On Sat, Dec 08, 2018 at 01:33:42PM +1100, Erik Christiansen wrote:
> On 07.12.18 16:42, Jason wrote:
> > On Fri, Dec 07, 2018 at 05:05:30PM -0000, Dan Purgert wrote:
> > > Jason wrote:
> > > > Does anyone know if there is a console based Arduino IDE available for 
> > > > Debian? I am interested in making a portable programmer that could be 
> > > > taken out on a job to edit and upload Arduino programs on site, without 
> > > > messing with a mouse.
> > > 
> > > Don't know of any IDEs for the commandline, but you can always use
> > > avrdude straight from the commandline to handle writing the compiled hex
> > > to the thing.
> > 
> > And what could I use to create the compiled hex?
> 
> The Arduino IDE uses the GNU toolchain behind the scenes. There are
> people who use the toolchain on the commandline, eschewing the GUI.
> Since the AVR crosscompiler and binutils will already be installed with
> the IDE, it is just a matter of editing sourcefiles with your favourite
> text editor, then running "make". If the IDE doesn't produce a makefile,
> instead using something nonstandard, you could look at the upthread
> link to Arduino-Makefile.
> 
> As I program AVRs directly (without bootloader), using avrdude, I had to
> check the manpage to see if it is compatible with the Arduino
> bootloader:
> 
> » The Arduino (which is very similar to the STK500 1.x) is supported via
>    its own programmer type specification ``arduino''.
> «
> 
> That would presumably merely use a laptop USB port to interface to the
> Arduino target board.
> 
> It looks pretty straightforward, but reading a few of the hits for a google
> of "arduino gnu toolchain", it seems that after editing the source with
> e.g. vim or emacs, the Arduino IDE itself can be commandline invoked
> without any GUI:
> 
> » Alternatively, if any of the following command line options is given,
>   no graphical interface will be shown and instead a one-off verify
>   (compile) or upload will be done.
> «
> 
> https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc
> 
> (I think that link has already been cited upthread.)

Indeed, it has been, and this looks to be the simplest option, using the 
Arduino IDE with command line options.

Thank you Joe, John Conover, Dan Purgert, deloptes, Linux-Fan, Cindy-Sue 
Causey, Erik Christiansen for your helpful ideas.

-- 
Jason

[toc] | [prev] | [next] | [standalone]

#203163

Jason wrote:
> On Fri, Dec 07, 2018 at 05:05:30PM -0000, Dan Purgert wrote:
>> Jason wrote:
>> > Does anyone know if there is a console based Arduino IDE available for 
>> > Debian? I am interested in making a portable programmer that could be 
>> > taken out on a job to edit and upload Arduino programs on site, without 
>> > messing with a mouse.
>> 
>> Don't know of any IDEs for the commandline, but you can always use
>> avrdude straight from the commandline to handle writing the compiled hex
>> to the thing.
>
> And what could I use to create the compiled hex?

Arduino IDE elsewhere -- I understood it as "I need to patch devices in
the field, after we made an enhancement in the office".


-- 
|_|O|_| Registered Linux user #585947
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: 05CA 9A50 3F2E 1335 4DC5  4AEE 8E11 DDF3 1279 A281

[toc] | [prev] | [next] | [standalone]

#203130

Hi Jason.

Maybe, http://www.johncon.com/john/archive/sprawACM0.txt,
http://www.johncon.com/john/archive/sprawACM0.tar.gz, but I don't know
the "Upload", etc., commands to the Arduino. If you do, (or can find
out,) you can add them at the bottom of sprawACM0.c, second function
up, (where the "switch" statement is the command interpreter.)

Just an idea ...

    John

Jason writes:
> Does anyone know if there is a console based Arduino IDE available for 
> Debian? I am interested in making a portable programmer that could be 
> taken out on a job to edit and upload Arduino programs on site, without 
> messing with a mouse.
> 

-- 

John Conover, conover@rahul.net, http://www.johncon.com/

[toc] | [prev] | [next] | [standalone]

#203131

On 12/7/18, Jason <electron@emypeople.net> wrote:
> Does anyone know if there is a console based Arduino IDE available for
> Debian? I am interested in making a portable programmer that could be
> taken out on a job to edit and upload Arduino programs on site, without
> messing with a mouse.


My apologies if this is just noise. This is out of my realm of
experience, BUT "apt-cache search" shared:

arduino-mk - Program your Arduino from the command line

Its description (from "apt-cache show"):

"Full-screen character mode text editor :: THE (The Hessling Editor)
is a text editor that uses both command line commands and key bindings
to operate. It is intended to be similar to the VM/CMS System Product
Editor, XEDIT and to KEDIT from Mansfield Software."

I reread your request then reran the search with "arduino ide". That
landed these:

arduino - AVR development board IDE and built-in libraries
junior-programming - Debian Jr. programming
flashrom - Identify, read, write, erase, and verify BIOS/ROM/flash chips
libmosquitto1 - MQTT version 3.1/3.1.1 client library
libmosquittopp1 - MQTT version 3.1/3.1.1 client C++ library
mosquitto - MQTT version 3.1/3.1.1 compatible message broker
mosquitto-clients - Mosquitto command line MQTT clients

DISCLAIMER: That doesn't mean those necessarily fit the "IDE" part of
your need, though. The way "apt-cache search" works, those could
possibly only include words that contain "ide" as part of their
spelling. It's a trade-off for having a feature that sure pulls up a
lot of handy information on occasion.

A slight variation using "arduino cli" received:

arduino-core - Code, examples, and libraries for the Arduino platform
arduino-mk - Program your Arduino from the command line
libmosquitto1 - MQTT version 3.1/3.1.1 client library
libmosquittopp1 - MQTT version 3.1/3.1.1 client C++ library
mosquitto-clients - Mosquitto command line MQTT clients

Hope that helps lead to something else if none of it is quite
appropriate. That arduino-mk description is creating a visual image of
elinks' format for me.

PS I'm going to take a peek at that junior-programming option. Its
description makes it sound like it just might communicate at about the
speed of my brain these days. Highlighting it in case someone might
want to test drive it with actual kids. :D

Cindy :)
-- 
Cindy-Sue Causey
Talking Rock, Pickens County, Georgia, USA

* runs with birdseed *

[toc] | [prev] | [next] | [standalone]

#203142

On Fri, Dec 07, 2018 at 12:13:07PM -0500, Cindy-Sue Causey wrote:
> On 12/7/18, Jason <electron@emypeople.net> wrote:
> > Does anyone know if there is a console based Arduino IDE available for
> > Debian? I am interested in making a portable programmer that could be
> > taken out on a job to edit and upload Arduino programs on site, without
> > messing with a mouse.
> 
> 
> My apologies if this is just noise. This is out of my realm of
> experience, BUT "apt-cache search" shared:
> 
> arduino-mk - Program your Arduino from the command line
> 


Thanks, all, for your suggestions; arduino-mk sounds most like what I'm 
after if it does what it says it does.

--
Jason

[toc] | [prev] | [next] | [standalone]

#203190

[Multipart message — attachments visible in raw view] — view raw

I'm a big fan of platform IO
https://platformio.org/

It's not really an IDE, but instead a bunch of command line tools that replace the functions of the Arduino IDE.

On December 7, 2018 10:28:48 AM CST, Jason <electron@emypeople.net> wrote:
>Does anyone know if there is a console based Arduino IDE available for 
>Debian? I am interested in making a portable programmer that could be 
>taken out on a job to edit and upload Arduino programs on site, without
>
>messing with a mouse.
>
>Thanks,
>-- 
>Jason

[toc] | [prev] | [standalone]

Back to top | Article view | linux.debian.user

csiph-web