Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #192482 > unrolled thread
| Started by | Long Wind <longwind2@yahoo.com> |
|---|---|
| First post | 2018-02-16 03:00 +0100 |
| Last post | 2018-02-16 12:20 +0100 |
| Articles | 6 — 3 participants |
Back to article view | Back to linux.debian.user
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
how to config usb wireless card? Long Wind <longwind2@yahoo.com> - 2018-02-16 03:00 +0100
Re: how to config usb wireless card? bw <bwtnguy@yahoo.com> - 2018-02-16 06:40 +0100
Re: how to config usb wireless card? Long Wind <longwind2@yahoo.com> - 2018-02-16 07:30 +0100
Re: how to config usb wireless card? deloptes <deloptes@gmail.com> - 2018-02-16 08:30 +0100
Re: how to config usb wireless card? Long Wind <longwind2@yahoo.com> - 2018-02-16 11:20 +0100
(solved) Re: how to config usb wireless card? Long Wind <longwind2@yahoo.com> - 2018-02-16 12:20 +0100
| From | Long Wind <longwind2@yahoo.com> |
|---|---|
| Date | 2018-02-16 03:00 +0100 |
| Subject | how to config usb wireless card? |
| Message-ID | <vjDtD-2aH-3@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
i have stretch and now i plug a usb card: [ 132.944064] usb 1-7: new high-speed USB device number 4 using ehci-pci [ 133.252061] usb 1-7: New USB device found, idVendor=0b05, idProduct=1706 [ 133.252066] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 133.252069] usb 1-7: Product: 802.11g WLAN Drive [ 133.252073] usb 1-7: Manufacturer: ASUS [ 133.676096] usb 1-7: reset high-speed USB device number 4 using ehci-pci [ 134.005949] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0003 [ 134.023050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 134.024767] usbcore: registered new interface driver rt2500usb but how to config to use it?? Thanks!
[toc] | [next] | [standalone]
| From | bw <bwtnguy@yahoo.com> |
|---|---|
| Date | 2018-02-16 06:40 +0100 |
| Message-ID | <vjGUx-4zX-3@gated-at.bofh.it> |
| In reply to | #192482 |
On Fri, 16 Feb 2018, Long Wind wrote: > i have stretch and now i plug a usb card: > [ 132.944064] usb 1-7: new high-speed USB device number 4 using ehci-pci > [ 133.252061] usb 1-7: New USB device found, idVendor=0b05, idProduct=1706 > [ 133.252066] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 133.252069] usb 1-7: Product: 802.11g WLAN Drive > [ 133.252073] usb 1-7: Manufacturer: ASUS > [ 133.676096] usb 1-7: reset high-speed USB device number 4 using ehci-pci > [ 134.005949] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0003 > [ 134.023050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 134.024767] usbcore: registered new interface driver rt2500usb > > but how to config to use it?? Thanks! > There are more than several ways to use wifi right now, I haven't used them all. https://wiki.debian.org/WiFi/HowToUse We should probably add the networkd that is built in to systemd now. I haven't used it, and don't really have documentation handy. The best I have found is man systemd-networkd I will probably get around to it someday. I have a similar device, pretty good, requires no firmware but weak scanning compared to others. Mine is an old, old Netopia rt2500usb dongle. I've used it with ifupdown, and also with networkmanager (needs wifi.scan-rand-mac-address=0) and it's okay. Not my favorite. Basically, I have only used three methods, ifupdown, wpa_cli, and networkmanager. They all really have different uses, depends if you need a mobile solution? need a gui? use vpn? Will the connection always be up? This kind of question is like saying, "What topping should I put on my pizza?"
[toc] | [prev] | [next] | [standalone]
| From | Long Wind <longwind2@yahoo.com> |
|---|---|
| Date | 2018-02-16 07:30 +0100 |
| Message-ID | <vjHGV-5bD-1@gated-at.bofh.it> |
| In reply to | #192488 |
[Multipart message — attachments visible in raw view] — view raw
Thank bw!i've installed wicd-gtkit shows only wired interface, no wireless interface.
i've not explored other methodsthey're likely more hard
On Friday, February 16, 2018 1:36 PM, bw <bwtnguy@yahoo.com> wrote:
On Fri, 16 Feb 2018, Long Wind wrote:
> i have stretch and now i plug a usb card:
> [ 132.944064] usb 1-7: new high-speed USB device number 4 using ehci-pci
> [ 133.252061] usb 1-7: New USB device found, idVendor=0b05, idProduct=1706
> [ 133.252066] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 133.252069] usb 1-7: Product: 802.11g WLAN Drive
> [ 133.252073] usb 1-7: Manufacturer: ASUS
> [ 133.676096] usb 1-7: reset high-speed USB device number 4 using ehci-pci
> [ 134.005949] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0003
> [ 134.023050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 134.024767] usbcore: registered new interface driver rt2500usb
>
> but how to config to use it?? Thanks!
>
There are more than several ways to use wifi right now, I haven't used
them all.
https://wiki.debian.org/WiFi/HowToUse
We should probably add the networkd that is built in to systemd now. I
haven't used it, and don't really have documentation handy. The best I
have found is man systemd-networkd I will probably get around to it
someday.
I have a similar device, pretty good, requires no firmware but weak
scanning compared to others. Mine is an old, old Netopia rt2500usb
dongle. I've used it with ifupdown, and also with networkmanager
(needs wifi.scan-rand-mac-address=0) and it's okay. Not my favorite.
Basically, I have only used three methods, ifupdown, wpa_cli, and
networkmanager.
They all really have different uses, depends if you need a mobile
solution? need a gui? use vpn? Will the connection always be up?
This kind of question is like saying, "What topping should I put on my
pizza?"
[toc] | [prev] | [next] | [standalone]
| From | deloptes <deloptes@gmail.com> |
|---|---|
| Date | 2018-02-16 08:30 +0100 |
| Message-ID | <vjICZ-5NV-1@gated-at.bofh.it> |
| In reply to | #192489 |
Long Wind wrote:
> Thank bw!i've installed wicd-gtkit shows only wired interface, no wireless
> interface. i've not explored other methodsthey're likely more hard
Try
rfkill list
and see if something is blocked. Use rfkill to unblock it
Try
iwconfig
to see if interface is available and use iwconfig to power up.
regards
[toc] | [prev] | [next] | [standalone]
| From | Long Wind <longwind2@yahoo.com> |
|---|---|
| Date | 2018-02-16 11:20 +0100 |
| Message-ID | <vjLhv-7DW-5@gated-at.bofh.it> |
| In reply to | #192491 |
[Multipart message — attachments visible in raw view] — view raw
Thank Deloptes!
i've tried "rfkill list", it says no to both hard and soft blocked
my energy is limited and i'll try other methods later on.
On Friday, February 16, 2018 3:21 PM, deloptes <deloptes@gmail.com> wrote:
Long Wind wrote:
> Thank bw!i've installed wicd-gtkit shows only wired interface, no wireless
> interface. i've not explored other methodsthey're likely more hard
Try
rfkill list
and see if something is blocked. Use rfkill to unblock it
Try
iwconfig
to see if interface is available and use iwconfig to power up.
regards
[toc] | [prev] | [next] | [standalone]
| From | Long Wind <longwind2@yahoo.com> |
|---|---|
| Date | 2018-02-16 12:20 +0100 |
| Subject | (solved) Re: how to config usb wireless card? |
| Message-ID | <vjMdz-8hs-5@gated-at.bofh.it> |
| In reply to | #192488 |
[Multipart message — attachments visible in raw view] — view raw
i'll look closely at:
https://wiki.debian.org/WiFi/HowToUse
and try them later on.
Thank to all those who reply!
On Friday, February 16, 2018 1:36 PM, bw <bwtnguy@yahoo.com> wrote:
On Fri, 16 Feb 2018, Long Wind wrote:
> i have stretch and now i plug a usb card:
> [ 132.944064] usb 1-7: new high-speed USB device number 4 using ehci-pci
> [ 133.252061] usb 1-7: New USB device found, idVendor=0b05, idProduct=1706
> [ 133.252066] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 133.252069] usb 1-7: Product: 802.11g WLAN Drive
> [ 133.252073] usb 1-7: Manufacturer: ASUS
> [ 133.676096] usb 1-7: reset high-speed USB device number 4 using ehci-pci
> [ 134.005949] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0003
> [ 134.023050] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 134.024767] usbcore: registered new interface driver rt2500usb
>
> but how to config to use it?? Thanks!
>
There are more than several ways to use wifi right now, I haven't used
them all.
https://wiki.debian.org/WiFi/HowToUse
We should probably add the networkd that is built in to systemd now. I
haven't used it, and don't really have documentation handy. The best I
have found is man systemd-networkd I will probably get around to it
someday.
I have a similar device, pretty good, requires no firmware but weak
scanning compared to others. Mine is an old, old Netopia rt2500usb
dongle. I've used it with ifupdown, and also with networkmanager
(needs wifi.scan-rand-mac-address=0) and it's okay. Not my favorite.
Basically, I have only used three methods, ifupdown, wpa_cli, and
networkmanager.
They all really have different uses, depends if you need a mobile
solution? need a gui? use vpn? Will the connection always be up?
This kind of question is like saying, "What topping should I put on my
pizza?"
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.user
csiph-web