Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #190257 > unrolled thread

Re: Re: Problem with Canon FS4000US film scanner and VueScan on Wheezy

Back to article view | Back to linux.debian.user

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: Re: Problem with Canon FS4000US film scanner and VueScan on Wheezy Jean-Francois Bosc <jfbosc@free.fr> - 2017-12-25 14:20 +0100

#190257 — Re: Re: Problem with Canon FS4000US film scanner and VueScan on Wheezy

Hi Boudewijn,

this is getting a bit old, but I recently moved to Debian Stretch, and gave
a little more time to this problem. I noticed that udev raises an error saying
"... was not an MTP device", and after some search on the net I managed to make
VueScan work by adding a specific udev rule :

root@debian:~# cat /etc/udev/rules.d/69-FS4000US-MTP.rules 
ATTR{idVendor}=="04a9", ATTR{idProduct}=="3042", SYMLINK+="libmtp-%k", MODE="660", GROUP="scanner", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1", TAG+="uaccess"
root@debian:~#

Just in case it would help.
Best regards,
Jean-François


Le 22/9/2016 à 21:09, Jean-Francois Bosc a écrit :
> 
> Hi Boudewijn,
> 
> thanks for your answer. Unfortunately no, I didn't manage solve my problem. The
> only solution I found from VueScan or other sources was to get (or write) a
> custom driver. And indeed my PC does not have an SCSI interface. But I've found
> that there are PCI extension cards for plugging SCSI devices. This could be the
> solution, maybe I will try to explore that.
> 
> Thanks again and best regards,
> Jean-François
> 
> 
> Le 18/9/2016 à 21:25, Boudewijn Kranendonk a écrit :
> > Hi Jean-Francois,
> > 
> > A year ago, on 06/14/2015 03:54 AM, Jean-Francois Bosc wrote[0]:
> > 
> > > I am trying to find some help for using a (rather old) Canon FS4000US film
> > > scanner with VueScan. Here is my problem : I am running Debian Wheezy (32
> > > bits), and I have been using the scanner for quite a while under previous
> > > Debian versions. 
> > > Now VueScan doesn't detect the scanner any more, it says "No scanner was 
> > > found attached to your computer". I suppose the problem appeared
> > > when I upgraded from Squeeze to Wheezy (I'm not 100% sure since I don't use
> > > the scanner very often, but what else could it be ?)
> > 
> > I ran into the same problem on Jessie, and after that into your mail on the 
> > list. Have you ever found a solution? 
> > 
> > For Jessie I did find a solution: use SCSI instead of USB. With modern 
> > computers it may not be a solution, because they mostly come without parallel 
> > SCSI interface, but that is a problem that can be solved via a second hand 
> > computer. 
> > 
> > I have not yet mailed VueScan about USB support, that may be another option 
> > (the usblib reference from hamrick.com to the Sane-help did not help me). 
> > 
> > In short: the VueScan can run the FS4000us on Linux via SCSI. Do not forget to 
> > set the switch at the bottom of the scanner from USB to SCSI. 
> > 
> > Best regards,
> > 
> > Boudewijn
> > 
> > PS: if my mail does arrive at your place but not at the debian-user-list, 
> > would you mind forwarding it for future reference?
> > [0] https://lists.debian.org/debian-user/2015/06/msg00677.html

[toc] | [standalone]

Back to top | Article view | linux.debian.user

csiph-web